KC Polymers is the world’s leading manufacturer of complete  pre-insulated pipe systems for the transportation of gases and liquids to the district heating and cooling, oil and gas, marine and industrial sectors.  KC Polymers is a well-known manufacturers and Supplier of  Pre-insulated MS Pipes and Pre-insulated HDPE Pipes,  fittings and accessories. A key component in the efficiency of the Hiline pipe systems is our choice of CFC-free polyurethane foam to provide excellent levels of insulation – in accordance with the demands of the EN 253 standard. Using cyclopentane as the blowing agent, we achieve very-low lambda levels – which result in much-reduced energy losses to the media being conveyed by the service pipe. KC Polymers Pre-insulated Pipes are totally non-corrosive, and are supplied ready insulated (pre-insulated) from the factory. Ready for installing and fitting in a system that rarely requires any further maintenance. Thus, there is no need of supplementary insulation, and at the same time the best insulation in the market is obtained: the lambda value is below 0.027 W/m°C during the entire service life of the pipe system. The pipes are easy to installation and test with high-pressure and supplied. The tight insulation guarantees a long service life span. Car¬rier pipes are kept dry, and therefore do not corrode. The pipes’ insulation qualities guarantee an ideal working environment. The integration of tracers to maintain the temperature minimises problems with coagula¬tion and the resulting production stops. Efficient insulation in pipes carrying steam means that the number of steam taps can be reduced.   Advantages of using pre-insulation instead of traditional insulation: 100% watertight 100% corrosion protected Energy saving No maintenance costs UV resistant Increased surface strength. A pre-insulated pipe normally consists of inside is the carrier pipe, which is typically made of HDPE pipes, steel, stainless steel, copper or plastic. Then comes an insulating layer of polyurethane foam (PUR foam), which is especially suited due to its high insulation qualities compared to mass and volume. On the outside is a protective jacket of HDPE, PVC or steel. The choice of carrier pipe, foam type and foam thickness, as well as the material for the jacket, is made by the customer, who can also choose to supply carrier pipes for the project. In a large number of projects, major benefits can be achieved by using pre-insulated pipe systems, Pre-insulated pipe systems are used by the chemical, pharmaceutical, petrochemical and food industries for the transport of: Drinking water Waste water Cooling water Hot water Steam Hydrocarbon Condensate Chemicals Lye Oil At operating temperatures below room temperature, condensation will be formed in traditional insulation. The required diffusion density can be achieved in the easiest and cheapest way with the our system. Our engineers and technicians offer a system analysis for each project, in order to determine whether it is advantageous to use pre-insulated pipes.

KC Polymers Pvt ltd has experienced engineers & staff to undertake the design, installation, testing and commissioning of large, complex projects like Rural and Urban Water Supply, Industrial Piping System, Marine outfall lines, Fuel Gas Supply systems and the likes. Quality of workmanship and timely delivery of systems( In accordance with ISO 9001 standards). KC Polymers is a well-known manufacturers and Supplier of  HDPE Pipes,  fittings and accessories. We also undertake jointing with help of accessories services for hdpe pipes. We have got a state of the art manufacturing facility with modern machineries, equipments and instruments that enables us to ensure manufacturing. We manufacture HDPE pipes of all standard lengths and diameters. Having a vast experience in the field we are ready to take up any challenge and complicated requirements. We are a quality centric organization and all our day to day processes are done in adherence with predefined company norms & standards. KC Polymers HDPE Pipes are appreciated everywhere in India for the calibre of the products and services we are rendering. Being one of the largest HDPE Pipes manufacturers in Ananthapur, Andhra pradesh, we have dealers network across all major cities of India. We have served many industrial and agricultural sectors. Our manufacturing plant is well equipped with modern machineries and testing equipments that enables us bulk production of HDPE pipes and fittings. We have been always open to new challenges in terms of research and development.

Chlorinated Poly (Vinyl Chloride) (CPVC) is a thermoplastic pipe and fitting material made with CPVC compounds meeting the requirements of ASTM Class 23447 as defined in ASTM Specification D1784.CPVC applications are for potable water distribution, corrosive fluid handling in industry, and fire suppression systems. CPVC piping systems are: Environmentally friendly. Provide long service life. Easy to install and handle. Corrosion resistant. Cost effective. Widely accepted by codes. Industrial CPVC pipe is manufactured by extrusion in sizes from ¼" to 12" diameter to Sch 40, Sch 80, and SDR (Standard Dimension Ratio) dimensions. APPLICATIONS: CPVC piping  which is suitable for hot and cold water distribution  has a 400 psi pressure rating at room temperature, and a 100 psi pressure rating at 180 F. CPVC materials  are resistant to many everyday household chemicals. Since CPVC materials  do not support combustion,  they cannot burn without an external fuel source. This property makes CPVC pipe an attractive alternative to steel and copper pipe for fire sprinkler applications. CPVC fire sprinkler piping systems are approved for light hazard applications and for use in single and multifamily dwellings. Installation shall be in accordance with the NFPA Section 13, 13D, and 13R. AVAILABILITY CPVC pipe and fittings are produced by many manufacturers, and are available in Schedule 40 and Schedule 80 dimensions, as well as CPVC tubing which is suitable for potable hot and cold water distribution. The tubing is based on copper tube sizes (OD) and IPS pipe (OD), with SDR 11 wall thicknesses.

KC Polymers is a partner of CR Valves and Industries, is into manufacturing of High Quality Valves for various applications including HVAC, Industrial, Water, Fire, Gas, etc., to name a few. We aim at being a Global Leader in supplying World Class Valves with Innovation features and solutions to major global corporate and clients for their Prestigious Projects Worldwide. Our products include Butterfly Valves, Balancing Valves, Dual Plate Check Valves, Wafer Check Valves, Gate/Sluice Valves, Non Return Valve (Reflux Valve), Double Air Valves, Single Air Valves, Ball Valves (with and without Strainer), Y–Strainers (WYE Type Strainers), Pot Strainers and Industrial Castings presently. At CR valves and Industries also believe in continuous rolling out series of innovative and value added products such as 2 way, 3 way mixing valves, Automatic and Pressure Independent Balancing Valves series, etc., . Kc polymers supply its products to the Oil and Gas, Power, Water, Steel, Industrial and HVAC sectors in the domestic market.

KC Polymers is the world’s leading manufacturer of complete  pre-insulated pipe systems for the transportation of gases and liquids to the district heating and cooling, oil and gas, marine and industrial sectors.  KC Polymers is a well-known manufacturers and Supplier of  Pre-insulated MS Pipes and Pre-insulated HDPE Pipes,  fittings and accessories. A key component in the efficiency of the Hiline pipe systems is our choice of CFC-free polyurethane foam to provide excellent levels of insulation – in accordance with the demands of the EN 253 standard. Using cyclopentane as the blowing agent, we achieve very-low lambda levels – which result in much-reduced energy losses to the media being conveyed by the service pipe. KC Polymers Pre-insulated Pipes are totally non-corrosive, and are supplied ready insulated (pre-insulated) from the factory. Ready for installing and fitting in a system that rarely requires any further maintenance. Thus, there is no need of supplementary insulation, and at the same time the best insulation in the market is obtained: the lambda value is below 0.027 W/m°C during the entire service life of the pipe system. The pipes are easy to installation and test with high-pressure and supplied. The tight insulation guarantees a long service life span. Car¬rier pipes are kept dry, and therefore do not corrode. The pipes’ insulation qualities guarantee an ideal working environment. The integration of tracers to maintain the temperature minimises problems with coagula¬tion and the resulting production stops. Efficient insulation in pipes carrying steam means that the number of steam taps can be reduced.   Advantages of using pre-insulation instead of traditional insulation: 100% watertight 100% corrosion protected Energy saving No maintenance costs UV resistant Increased surface strength. A pre-insulated pipe normally consists of inside is the carrier pipe, which is typically made of HDPE pipes, steel, stainless steel, copper or plastic. Then comes an insulating layer of polyurethane foam (PUR foam), which is especially suited due to its high insulation qualities compared to mass and volume. On the outside is a protective jacket of HDPE, PVC or steel. The choice of carrier pipe, foam type and foam thickness, as well as the material for the jacket, is made by the customer, who can also choose to supply carrier pipes for the project. In a large number of projects, major benefits can be achieved by using pre-insulated pipe systems, Pre-insulated pipe systems are used by the chemical, pharmaceutical, petrochemical and food industries for the transport of: Drinking water Waste water Cooling water Hot water Steam Hydrocarbon Condensate Chemicals Lye Oil At operating temperatures below room temperature, condensation will be formed in traditional insulation. The required diffusion density can be achieved in the easiest and cheapest way with the our system. Our engineers and technicians offer a system analysis for each project, in order to determine whether it is advantageous to use pre-insulated pipes.

KC Polymers Pvt ltd has experienced engineers & staff to undertake the design, installation, testing and commissioning of large, complex projects like Rural and Urban Water Supply, Industrial Piping System, Marine outfall lines, Fuel Gas Supply systems and the likes. Quality of workmanship and timely delivery of systems( In accordance with ISO 9001 standards). KC Polymers is a well-known manufacturers and Supplier of  HDPE Pipes,  fittings and accessories. We also undertake jointing with help of accessories services for hdpe pipes. We have got a state of the art manufacturing facility with modern machineries, equipments and instruments that enables us to ensure manufacturing. We manufacture HDPE pipes of all standard lengths and diameters. Having a vast experience in the field we are ready to take up any challenge and complicated requirements. We are a quality centric organization and all our day to day processes are done in adherence with predefined company norms & standards. KC Polymers HDPE Pipes are appreciated everywhere in India for the calibre of the products and services we are rendering. Being one of the largest HDPE Pipes manufacturers in Ananthapur, Andhra pradesh, we have dealers network across all major cities of India. We have served many industrial and agricultural sectors. Our manufacturing plant is well equipped with modern machineries and testing equipments that enables us bulk production of HDPE pipes and fittings. We have been always open to new challenges in terms of research and development.

Chlorinated Poly (Vinyl Chloride) (CPVC) is a thermoplastic pipe and fitting material made with CPVC compounds meeting the requirements of ASTM Class 23447 as defined in ASTM Specification D1784.CPVC applications are for potable water distribution, corrosive fluid handling in industry, and fire suppression systems. CPVC piping systems are: Environmentally friendly. Provide long service life. Easy to install and handle. Corrosion resistant. Cost effective. Widely accepted by codes. Industrial CPVC pipe is manufactured by extrusion in sizes from ¼" to 12" diameter to Sch 40, Sch 80, and SDR (Standard Dimension Ratio) dimensions. APPLICATIONS: CPVC piping  which is suitable for hot and cold water distribution  has a 400 psi pressure rating at room temperature, and a 100 psi pressure rating at 180 F. CPVC materials  are resistant to many everyday household chemicals. Since CPVC materials  do not support combustion,  they cannot burn without an external fuel source. This property makes CPVC pipe an attractive alternative to steel and copper pipe for fire sprinkler applications. CPVC fire sprinkler piping systems are approved for light hazard applications and for use in single and multifamily dwellings. Installation shall be in accordance with the NFPA Section 13, 13D, and 13R. AVAILABILITY CPVC pipe and fittings are produced by many manufacturers, and are available in Schedule 40 and Schedule 80 dimensions, as well as CPVC tubing which is suitable for potable hot and cold water distribution. The tubing is based on copper tube sizes (OD) and IPS pipe (OD), with SDR 11 wall thicknesses.

KC Polymers is a partner of CR Valves and Industries, is into manufacturing of High Quality Valves for various applications including HVAC, Industrial, Water, Fire, Gas, etc., to name a few. We aim at being a Global Leader in supplying World Class Valves with Innovation features and solutions to major global corporate and clients for their Prestigious Projects Worldwide. Our products include Butterfly Valves, Balancing Valves, Dual Plate Check Valves, Wafer Check Valves, Gate/Sluice Valves, Non Return Valve (Reflux Valve), Double Air Valves, Single Air Valves, Ball Valves (with and without Strainer), Y–Strainers (WYE Type Strainers), Pot Strainers and Industrial Castings presently. At CR valves and Industries also believe in continuous rolling out series of innovative and value added products such as 2 way, 3 way mixing valves, Automatic and Pressure Independent Balancing Valves series, etc., . Kc polymers supply its products to the Oil and Gas, Power, Water, Steel, Industrial and HVAC sectors in the domestic market.