K B Electronics

Prabhadevi, Mumbai, Maharashtra

specificationsmodel : ps2410a input i/p : 230v ac, 1-phfrequency : 47-63hzrange : 180-270v acfuse protection. : yesi/p mov : yessoft start : yesinrush current : 46a@230v acac currentleakage current :

SpecificationsMODEL : PS6KW11040AModular Swappable Design Individual Unit of 110V 10A output. INPUT I/P : 230V AC, 1-Ph, 40-60HzRange : 180-270V ACFuse Protection.I/P MOVSoft StartInrush current : OUTPUT Nominal Voltage : 110V DCVoltage Range : VCurrent : 40ALine Regulation : +/- 0.5%Load Regulation : +/- 1%Ripple : +/- 1% (P-P)Noise : +/- 1%Protections : a) Overload Protection auto recovery type.b) Short circuit protection auto recovery type.c) OVP Protection Latching type.d) Over temperature auto recovery type.Current Limit. ENVIRONMENTAL Operating temperature upto 500 C.Humidity : < 95% RhIP 21 GENERALBuilt in Power Factor Correction- 0.99Isolation : Input to Output 1.5KVInput to Earth 1.5KVOutput to Earth- 500VMTBF : 50K Hrs to MILEfficiency : Potential Free Contact for each module Alarm contact INDICATIONS LED OF EACH MODULE(110V10A): a) Input OK Green LEDb) Output OK-Green LEDc) Input Under or Over Voltage(U/O)-Red LEDd) Output Over Voltage(OVP)-Red LEDe) Output Over Load(O/L)-Red LEDf) Output Over Temp(O/T)-Red LEDg) Output Short (S/B)-Red LED Indications on outer panel (1) DC output ok (2) AC input ok(3) Fault(4) Voltmeter(5) Ammeter MECHANICALDimension : 600W X 550D X 670H mmCooling type : Fan cooled exhaust ??Weight : 37 Kgs OPTIONALRedundancy by external diode. Programmable by external signal voltage & currentRemote ON/OFF 2 Years Warranty Specification subject to change as per our continuous developments

SpecificationsMODEL : BCOE1206A INPUT I/P : 230V AC, 1-Ph, 40-60HzRange : 180-270V ACFuse Protection.I/P MOVSoft StartInrush current : 46A@230V AC OUTPUT Nominal Battery Voltage : 12V DC Float Voltage : 13.5VBoost Voltage : 14.4VRated Current : 6A (adj.2-6A)Line Regulation : +/- 1%Load Regulation : +/- 1%Ripple : +/- 1% (P-P)Protections : a) Overload Protection auto recovery type.b) Short circuit protection auto recovery type.c) OVP Protection Latching type.d) Reverse Polarity by fuse.Current Limit : Yes ENVIRONMENTAL Operating temperature upto 500 C.Humidity : < 95% RhIP 21 Protection GENERALIsolation : Input to Output 1.5KVInput to Earth 1.5KVOutput to Earth- 500VMTBF : 50K Hrs to MIL INDICATIONS LED : a) Input OK b) Output OK c) Output OVP d) Floate) Boost MECHANICALDimension : 165W X 105D X 60H mmCooling type : NaturalWeight : 0.9 Kg 2 Years Warranty Specification subject to change as per our continuous developments

SpecificationsMODEL : BCSA12-2420A INPUT I/P : 230V AC, 1-Ph, 40-60HzRange : 180-270V ACFuse Protection.I/P MOVSoft StartInrush current : 92A@230V AC OUTPUT Nominal Battery Voltage : 12V DC / 24V DC (selector switch provided to select the 12V or 24V)Float Voltage : 13.5V / 27V Boost Voltage : 14.4V / 28.8VTop up Voltage : 15.6V / 31.2V(only for Lead acid battery)Manual Voltage adj. : 12-16.5V / 24-33VCurrent : 20A (adj. 5-20A)Line Regulation : +/- 1%Load Regulation : +/- 1%Ripple : +/- 1% (P-P)Protections : a) Overload Protection auto recovery type.b) Short circuit protection auto recovery type.c) OVP Protection Latching type.d) Reverse Polarity by fuse & MCB.Current Limit : Yes ENVIRONMENTAL Operating temperature upto 500 C.Humidity : < 95% RhIP 21 Protection GENERALDigital Voltmeter & Currentmeter providedInput and output MCB providedAuto / Manual switch provided Jumper provided to select the battery type SMF/ Lead AcidPotential Free Contact Alarm contact ?????Isolation : Input to Output 1.5KVInput to Earth 1.5KVOutput to Earth- 500VMTBF : 50K Hrs to MIL INDICATIONS LED : a) Floatb) Boostc) Equiliserg) Top up MECHANICALDimension : 260(W) X 155(D) X 220(H)mm Cooling type : FanWeight : 5.5 Kgs OPTIONAL Load and Battery Terminal separate. 2 Years Warranty Specification subject to change as per our continuous developments

SpecificationsInput Specifications : 24V DC 150W (from PV Panel)MPPT Point : 34V DC (adj.) Output Specifications : 14V DC (adj.) 10A (CVCC)To charge 12V Battery ( Max.100AH Capacity) Dimension : Features : Upto 30% more energy conversion efficiency as compared to ON/OFF and PWM type.Reduction in wire thickness and hence cabling cost.Battery Overcharge Protection.Reverse Polarity Protection : Battery, PV and Load.Load Protection : Overload, Short CircuitPrevents Reverse battery current into PV panel at night.Multiple layers of conformal coating for environmental protection.Compact size compared to other MPPT chargers.LED indicators and Remote Alarm annunciators provision.2 Years Warranty Specification subject to change as per our continuous developments