• Works on null balance pressure system
• Operating pressure : 43psi 60psi (3-4 bar)
• Available in two resolutionL.C. 0.0005mm, Range : 0.02mmL.C. 0.001mm, Range : 0.04mm

• Memory storage of 4 channel
• Selectable range & Least count
• AIR ELECTRONIC CONVERTOR complete with 1.5 mtr.
• Six digit display
• Absolute / Comparative Measurement
• Auto calibration Facility
• Metric/Inch Measurement
• Static/Dynamic measurement
• RS 232 Output
• Relay Output 24 V
• Tricolour LED for component tolerance status
• Taper Reading ( Dia 1 Dia 2 ) directly on Display 3 OR 3 DIAMETER AT A TIME
• Main air supply (1/4 BSP) along with filter set and Air Drier Unit ( 2 / 3 Channel )

Used for the calibration of Venire Calipers and Height Gauges, Caliper Checker is designed to check accuracy of Main Scale at regular intervals through out the range, which meets the requirements of IS Standards.

The instrument is sufficiently rigid and consists of stepped slip gauges permanently fixed in inner casing .The Caliper Checker is ideal for in house periodic calibration of measuring instruments i.e. Venire Caliper and Height Gauge.

Micrometer checker for quick calibration of 0-25mm micrometers. These sets are available in metric & inch sizes. They are designed specially to suit calibration and inspection of micrometers.

The sizes in the set are so selected that they ensure checking of micrometers at various radial positions. Thus in addition to the pitch error, errors due to drunken threads also can be located. This set is also recommended by is-2967 of 1964 for inspection of external micrometers. Micrometer Checking Set comprises of the following sizes in grades 0, I and II.
Metric 10-piece Set2.5, 5.1, 7.7, 10.3, 12.9, 15.0, 17.6, 20.2, 22.8 & 25.0 mm
Metric 8-pieces set3.1, 6.5, 9.7, 12.5, 15.8, 19.0, 21.9 & 25.0 mm
Imperial 8 pieces set0.130, 0.250, 0.385, 0.50, 0.615, 0.750, 0.870 & 1.

Manufactured in three types

• 0-150mm with find adjustment:Mounting hole : 8, 28 & 30mm, Work table : 60mm in Plain/Serrated in steel/carbide
• 0-200 & 0-300mm with fine adjustment:Mounting hole : 8mm, Work table : 606060mm in Plain/Serrated in steel/carbide808016mm in Plain/Serrated in steel

We are experts in supplying the standard, non-standard & customized of Set Box . Customers satisfaction is our atmost priority. We may compromise our price but will not compromise our quality of product and service.

• Offers measuring pins 0.5 20mm in Grade 0 tol. 0.5m Grade 1 tol. 1m, Grade 2 tol. 2m as per IS11103 standard.
• Length: 40 1.5mm, 50 1.5mm
• Step 0.01mm / 0.02mm / 0.05mm with Wooden box
• Carbide std pin Length 35mm
• Made of selected alloy steel and tungsten carbide giving high-grade super finish and greater wear resistance.
• Supplied in set as well as individual pins.

The instrument serves the calibration of gauge from 0.5 to 100 mm length. The slip gauge to be measured is compared with reference master whose deviation at center is exactly known. With two measuring probes, one at the top and the other at the base plate, this differential measurement gives reliable measurements with extremely high accuracy.

A template profile allows the probes to trace 5 points on the surface of the slip gauge under test and one at the center point of the reference master. The manual remote control allows to move the slip gauge smoothly without jerk and interference from body heat.

The instrument comes in two versions: Manual and Computerized.The computerized version allows quicker inspection its user-friendly interface and intuitive design.

The calibration conform with the requirements of National and International Standards i.e. IS-2984 of 1981 and DIN-861 of 1988.
The following features are determined in accordance with the specifications of the standards:

• Center deviation.
• Parallelism by measuring at 5 points, and
• Thereby selection of the Grade.

The system is useful in the calibration laboratories which are officially approved by the National Accreditation Board.

• Memory storage of 4 channel
• Metric / Imperial measurement
• Auto calibration facility
• Selectable range & Least count
• Air Electronic Converter complete with 1.5 mtr
• Main air supply (1/4 BSP) along with Filter & Dryer unit
• Vertical Bar Graph (Tri Colour/Red/Umber/Green) & Red Six digit display
• 4 different setting parameters stored
• RS 232 Output / Relay Output 24 V
• Single Tri-colour LED for component tolerance status
• Tolerance pointers

Non Contact Video Based Metrology provides more detailed data about sample than single point contact systems. The integration with highly accurate positioning auto edge determination and powerful 2 dimensional Data processing Softwares / hardwares has made Video Measuring Systems one of the most versatile metrology tool.

An excellent solution to the most critical requirements of high quality Optical Profile Measuring. Suitable for measuring different shapes, complicated profiles such as press components, gears, cams, treads, tools, dies, turned components, automats etc. Most effective device to measure most 2 dimensional parameters like linear dimension, angle.

Software: Multi-Window display and easy operation. Automatic edge-detection 2-Axis geometrical measuring function 2D Parameters like Line, Circle, Angle, Distance, Rectangle etc.

Focus Indicator can precisely determine Z axis. Windows 2000/XP Vision tool equips edge-trimming, output the most precise data. Excellent graphic allows to save, print out, and transfer to CAD.

Our R & D Unit is striving continuously to develop our own standards such as Air gauging system, Dial calibration tester, Master Cylinders, Linear tables.excessively to our forecast products.

This division exclusively design and develop the measurement solution to your components for quick and effective inspection as featured below :

• Standard gauges such as Plain Plug Gauges, Plain Snap Gauges.
• Customized gauges such as position gauge, receiver gauge, depth gauge, flush pin gauge and groove diameter checking gauge.
• Multi-measurement system by linear probes inclusive of software integration to reduce the inspection time.
• Automation of inspection system with sensor and PLC configuration.
• Electronic Contact Type Multi-Gauging System for TULIP
• PC BASED CAMSHAFT Multi-Gauging System
• Electronic Multi-Gauging System for SPROCKET

Features

• Offering grade 00, k, 0, 1 & 2 in line with IS/ISO/DIN/BS standards in Metric and imperial
• Made from special grade of Alloy steel
• Check set of slip gauges for micrometer calibration are available
• Customized sizes available
• Standard Sets Offered are:

Length Bars are made from High Carbon High Chromium Steel, ensuring that the gauge faces are hardened to 64 RC (800 HV). The bars have a round section of 30mm for greater stability, and ease of handling . Both ends are threaded and recessed, and Precision lapped to meet with the stipulated requirements of finish, flatness, parallelism and gauge length. Length Bars are available upto 500mm in the following grades:

• Calibration ( 0 )
• Inspection ( I )
• Workshop ( II )

With 8 pieces set, length bars can be combined upto 2000mm by using M6 stud.

• Works on null balance pressure system
• Operating pressure : 43psi 60psi (3-4 bar)
• Available in two resolutionL.C. 0.0005mm, Range : 0.02mmL.C. 0.001mm, Range : 0.04mm

• Memory storage of 4 channel
• Selectable range & Least count
• AIR ELECTRONIC CONVERTOR complete with 1.5 mtr.
• Six digit display
• Absolute / Comparative Measurement
• Auto calibration Facility
• Metric/Inch Measurement
• Static/Dynamic measurement
• RS 232 Output
• Relay Output 24 V
• Tricolour LED for component tolerance status
• Taper Reading ( Dia 1 Dia 2 ) directly on Display 3 OR 3 DIAMETER AT A TIME
• Main air supply (1/4 BSP) along with filter set and Air Drier Unit ( 2 / 3 Channel )

Used for the calibration of Venire Calipers and Height Gauges, Caliper Checker is designed to check accuracy of Main Scale at regular intervals through out the range, which meets the requirements of IS Standards.

The instrument is sufficiently rigid and consists of stepped slip gauges permanently fixed in inner casing .The Caliper Checker is ideal for in house periodic calibration of measuring instruments i.e. Venire Caliper and Height Gauge.

Micrometer checker for quick calibration of 0-25mm micrometers. These sets are available in metric & inch sizes. They are designed specially to suit calibration and inspection of micrometers.

The sizes in the set are so selected that they ensure checking of micrometers at various radial positions. Thus in addition to the pitch error, errors due to drunken threads also can be located. This set is also recommended by is-2967 of 1964 for inspection of external micrometers. Micrometer Checking Set comprises of the following sizes in grades 0, I and II.
Metric 10-piece Set2.5, 5.1, 7.7, 10.3, 12.9, 15.0, 17.6, 20.2, 22.8 & 25.0 mm
Metric 8-pieces set3.1, 6.5, 9.7, 12.5, 15.8, 19.0, 21.9 & 25.0 mm
Imperial 8 pieces set0.130, 0.250, 0.385, 0.50, 0.615, 0.750, 0.870 & 1.

Manufactured in three types

• 0-150mm with find adjustment:Mounting hole : 8, 28 & 30mm, Work table : 60mm in Plain/Serrated in steel/carbide
• 0-200 & 0-300mm with fine adjustment:Mounting hole : 8mm, Work table : 606060mm in Plain/Serrated in steel/carbide808016mm in Plain/Serrated in steel

We are experts in supplying the standard, non-standard & customized of Set Box . Customers satisfaction is our atmost priority. We may compromise our price but will not compromise our quality of product and service.

• Offers measuring pins 0.5 20mm in Grade 0 tol. 0.5m Grade 1 tol. 1m, Grade 2 tol. 2m as per IS11103 standard.
• Length: 40 1.5mm, 50 1.5mm
• Step 0.01mm / 0.02mm / 0.05mm with Wooden box
• Carbide std pin Length 35mm
• Made of selected alloy steel and tungsten carbide giving high-grade super finish and greater wear resistance.
• Supplied in set as well as individual pins.

The instrument serves the calibration of gauge from 0.5 to 100 mm length. The slip gauge to be measured is compared with reference master whose deviation at center is exactly known. With two measuring probes, one at the top and the other at the base plate, this differential measurement gives reliable measurements with extremely high accuracy.

A template profile allows the probes to trace 5 points on the surface of the slip gauge under test and one at the center point of the reference master. The manual remote control allows to move the slip gauge smoothly without jerk and interference from body heat.

The instrument comes in two versions: Manual and Computerized.The computerized version allows quicker inspection its user-friendly interface and intuitive design.

The calibration conform with the requirements of National and International Standards i.e. IS-2984 of 1981 and DIN-861 of 1988.
The following features are determined in accordance with the specifications of the standards:

• Center deviation.
• Parallelism by measuring at 5 points, and
• Thereby selection of the Grade.

The system is useful in the calibration laboratories which are officially approved by the National Accreditation Board.

• Memory storage of 4 channel
• Metric / Imperial measurement
• Auto calibration facility
• Selectable range & Least count
• Air Electronic Converter complete with 1.5 mtr
• Main air supply (1/4 BSP) along with Filter & Dryer unit
• Vertical Bar Graph (Tri Colour/Red/Umber/Green) & Red Six digit display
• 4 different setting parameters stored
• RS 232 Output / Relay Output 24 V
• Single Tri-colour LED for component tolerance status
• Tolerance pointers

Non Contact Video Based Metrology provides more detailed data about sample than single point contact systems. The integration with highly accurate positioning auto edge determination and powerful 2 dimensional Data processing Softwares / hardwares has made Video Measuring Systems one of the most versatile metrology tool.

An excellent solution to the most critical requirements of high quality Optical Profile Measuring. Suitable for measuring different shapes, complicated profiles such as press components, gears, cams, treads, tools, dies, turned components, automats etc. Most effective device to measure most 2 dimensional parameters like linear dimension, angle.

Software: Multi-Window display and easy operation. Automatic edge-detection 2-Axis geometrical measuring function 2D Parameters like Line, Circle, Angle, Distance, Rectangle etc.

Focus Indicator can precisely determine Z axis. Windows 2000/XP Vision tool equips edge-trimming, output the most precise data. Excellent graphic allows to save, print out, and transfer to CAD.

Our R & D Unit is striving continuously to develop our own standards such as Air gauging system, Dial calibration tester, Master Cylinders, Linear tables.excessively to our forecast products.

This division exclusively design and develop the measurement solution to your components for quick and effective inspection as featured below :

• Standard gauges such as Plain Plug Gauges, Plain Snap Gauges.
• Customized gauges such as position gauge, receiver gauge, depth gauge, flush pin gauge and groove diameter checking gauge.
• Multi-measurement system by linear probes inclusive of software integration to reduce the inspection time.
• Automation of inspection system with sensor and PLC configuration.
• Electronic Contact Type Multi-Gauging System for TULIP
• PC BASED CAMSHAFT Multi-Gauging System
• Electronic Multi-Gauging System for SPROCKET

Features

• Offering grade 00, k, 0, 1 & 2 in line with IS/ISO/DIN/BS standards in Metric and imperial
• Made from special grade of Alloy steel
• Check set of slip gauges for micrometer calibration are available
• Customized sizes available
• Standard Sets Offered are:

Length Bars are made from High Carbon High Chromium Steel, ensuring that the gauge faces are hardened to 64 RC (800 HV). The bars have a round section of 30mm for greater stability, and ease of handling . Both ends are threaded and recessed, and Precision lapped to meet with the stipulated requirements of finish, flatness, parallelism and gauge length. Length Bars are available upto 500mm in the following grades:

• Calibration ( 0 )
• Inspection ( I )
• Workshop ( II )

With 8 pieces set, length bars can be combined upto 2000mm by using M6 stud.