Kashyap Engineering

Makarpura, Vadodara, Gujarat

The rotary bottle washing machine is compact and highly efficient machine with elegant look. This multifunctional multi featured machine meets the GMP requirements of washing for glass and plastic bottles. The machine operates on the rotary principle with "GENEVA" mechanism and requires manual loading and unloading of bottles.

The bottles are loaded on the subsequent indexing part of rotating platform and are cleaned in series of operations. Specially designed bottle holders provided to hold bottles with neck diameter. The bottles are placed in an inverted position in these cup shaped holders. Spraying showers does the external cleaning of the bottles. Solenoid valves are provided to enable the regulation of wash timings, it also spraying water when bottle are stopped means ensure saving of water, and sequence of various washing media to suit specific requirement.

• Geneva Mechanism
• Four inner (Included one air wash) & one outer
• Sequence of washes to customer's choice
• Easy operation
• Stationary nozzles eliminate contamination of water cycles
• Easy loading and unloading
• Individual solenoid valve for each washing sequence, that eliminates carbon plate and other accessories reduce leakage and maintenance to minimum
• Higher capacity centrifugal pumps to wash bigger bottles (500 & 1000 ml.)
• The stationary nozzles avoid chipping of bottle necks
• Pumps and tanks are mounted on portable stand for easy maintenance
• Bottle guide especially for lightweight bottle
• Pumps and tanks are mounted on portable stand for easy maintenance
• Separate panel control to avoid any short circuit due to spraying of water
• S.S. glycerine fill pressure meter

The Automatic Vertical Sticker Labeling Machine is one of the most user friendly. The machine is used for full/partial wrap around labeling on different size of round container. It is capable of labeling up to 150 containers per minutes depending on products and label size. The automatic model is equipped with roller spacing device resulting in a simple to "No change parts required".

The round containers positioned & accurate spacing between two containers by the roller spacing device for wrap-around operation at the operation at the labeling point, an electronic product sensor senses container & release a label from self adhesive label roll. If machine is equipped with batch printing device in that case batch printing device prints the batch no. & other matter on label during label is stationary means time between sensing of two label. The sensed round container moves on conveyor sticker label at labeling point wrapped around to container. Then the labeled container moves further through a rubber pressing belt & stationary rubber pad that ensures neat & perfect fixing of label.

• High Production Speeds
• Stainless steel 304 construction
• GMP design
• Accurate label placement
• Full Security Package including counter
• Product data storage facility
• No change parts requirements
• Very less down time for change over
• Suitable for Glass, Plastic, Pet, Tin, Corrugated containers

Salient Features:

• Manually Tube feeding
• Rotary type & compact design
• Filling range 5 gm to 50 gm
• Filling accuracy ± 0.1 %
• Correct & uniform filling
• No tube no filling device
• For Aluminum tube Crimping done by mechanical
• For Lami & Plastic tube sealing, coding & cutting by Pneumatic cylinder
• Hot air system for tube sealing by leister heater & blower
• Batch coding Number (Male or Female) also available
• Tube cooling by water pump to circulate water outside tube portion for improve sealing quality
• Quick changeover from aluminum to lami tubes
• No tails is occur after filling time
• All the contact parts in S.S. 304/316/316L as per your requirement
• Production counter available on control panel to indicate number of tube filled
• Lower maintenance require
• Automatic tube ejection

Automatically labels round container of glass, plastic, aluminium, pet, cardboard container, will wrap-around labels in the vertical position by using cold glue. It is rigid, versatile and engineered for reliability and enhance operational efficiency in addition, it has several exclusive features which offer additional advantages.

The round containers positioned accurately by the feed worm for wrap-around operation at the labeling point, the rotating glue cylinder receives cold glue from gluepot that subsequently gets transferred on the Glue Rubber Roller. Finally a fine, even and thin film of glue is transferred to the gluing pad. The round container on the moving conveyor at the feed worm actuates a sequence, which result in the oscillation of the Label Box. The rotating Label Master aligned with the help of pick up fingers from the Label Master & with oscillating Label Box. The pick-up cylinder receives labels with the help of pick up fingers from the label master. The pick-up cylinder holds the labels perfectly with due to vacuum during its rotational movement. Simultaneously the pick-up fingers move inside. The round container moves on conveyor with the help of worm and glued label on pick-up cylinder wrapped around to container by virtue of strip belts. Then the labelled container moves further through a rubber pressing belt & stationary rubber pad that ensures neat & perfect fixing of label.

• All exposed parts of the unit are of S.S, hard chromed or SS cladding to ensure long life and resistance against corrosion
• Adjustable Conveyor Height to align with other machine of the line
• Minimum changeover time is required from one size of container or label to another
• Special self-aligning bearing ensure smooth and trouble free rotation of the parts
• These self-aligning bearings help in quick assemble during periodical maintenance of the unit. They also allow more flexibility in maintaining tolerances
• No container, No label, an electrical sensing device avoids wastage of labels, it also helps in keeping the unit neat & clean
• Suitable for overlap labelling and flag type labelling where the length of label is more than the circumference of container
• A highly efficient vacuum pump develops sufficient vacuum to hold labels big or small on the pick-up cylinder
• Complete protection of the motors is ensured by the contactors and relays of appropriate ratings

 

Optional Accessories:

• Sealing & Crimping Types: Hot air/ hot jaw / ultrasonics, double triple & saddle type fold for metal tubes
• Jacketed hopper & stirrer
• Batch Coading Arrangement [ Male or Female ] Type is also provided
• Transfers Pumps
• Tube cleaning Attachment

The rotary bottle washing machine is compact and highly efficient machine with elegant look. This multifunctional multi featured machine meets the GMP requirements of washing for glass and plastic bottles. The machine operates on the rotary principle with "GENEVA" mechanism and requires manual loading and unloading of bottles.

The bottles are loaded on the subsequent indexing part of rotating platform and are cleaned in series of operations. Specially designed bottle holders provided to hold bottles with neck diameter. The bottles are placed in an inverted position in these cup shaped holders. Spraying showers does the external cleaning of the bottles. Solenoid valves are provided to enable the regulation of wash timings, it also spraying water when bottle are stopped means ensure saving of water, and sequence of various washing media to suit specific requirement.

• Geneva Mechanism
• Easy operation
• Stationary nozzles eliminate contamination of water cycles
• Easy loading and unloading
• Individual solenoid valve for each washing sequence, that eliminates carbon plate and other accessories reduce leakage and maintenance to minimum
• Higher capacity centrifugal pumps to wash bigger bottles (500 & 1000 ml.)
• The stationary nozzles avoid chipping of bottle necks
• Pumps and tanks are mounted on portable stand for easy maintenance
• Bottle guide especially for lightweight bottle
• Pumps and tanks are mounted on portable stand for easy maintenance
• Separate panel control to avoid any short circuit due to spraying of water
• S.S. glycerine fill pressure meter

Semi automatic liquid filling machine, Semi automatic volumetric liquid filling machine is accurate based on sturdy welded steel frame totally enclose in stainless steel sheet and doors are provided to facilitate the adjusting of machine. Working with volumetric guideline. The unit is made minimized, adaptable and encased in stainless steel elegantly matt completion body.

Bottle filling equipment, We are prominent name, which is occupied with delivering a wide range of Automatic Bottle Filling Machine. The offered range of bottle filling machines is made using high review raw material and sophisticated machines in complete adherence with the international quality standards. Besides, the offered range of bottle filling machines is generally appreciated among the customers for its reliability, durability and high performance. Find their application in industries like Pharmaceuticals, Health Care, Chemical, Cosmetic, Herbal, Food, these machines are best known for their easy installation, compact design and rugged construction. in addition to this, our clients can avail these machines at an affordable price.Features: Constant operationEfficient performanceLonger functional life

Depends on bottle size, cap size and type of cap. ** We can supply as per customer requirements. *** With help of change parts.

Description:

• The Automatic Cap Sealing Machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine.

Operation:

• The feed container moving on conveyor belt are fed into star wheel, bringing the container below the sealing head in the subsequent indexing part, mean while the bottle pickup a cap from the delivery chute of cap feeding bowl, where the body and the neck of the container are positioned below the rotating head. Where the sealing head is performing perfect operation of threading & sealing.

 

Salient Features:

• No container No cap arrangement.
• SS elegantly matt finished body.
• Single motor synchronizes conveyor, star wheel, & platform turret.
• Adjustable height of conveyor belt, to align with other machine of the line.
• Sealing pressure can be varied to suit different gauges and size of caps.
• Low noise level, low power consumptions.
• Self-lubricating UHMW- PE guide profile for low friction wears surface, smooth and noiseless conveying.
• SS cladding or hard chrome platting of all exposed parts to ensure long life and resistance against corrosion.
• Synchronized A/C drives to synchronize, Conveyor, Star wheel and Platform turret & capping bowl.
• Adjustable bottle height gauge for easy and quick setting.

Salient Features: No container No cap arrangement. SS elegantly matt finished body. Single motor synchronizes conveyor, star wheel, & platform turret. Adjustable height of conveyor belt, to align with other machine of the line. Sealing pressure can be varied to suit different gauges and size of caps. Low noise level, low power consumptions.

Oil filling machine, The programmed electronic oil filling machine is minimal and exceedingly effective machine with an exquisite look. This multi function, multi included machine meets the custom prerequisites of filling for glass, plastic and aluminum bottles. The machine has its own pumping framework to associate the machine with primary tank. The stream of fluid is measured and changed over into electronic signs being controlled by micro computer base circuitry. Least change required to set diverse limits from 1 liters to 5 liters with shifting compartments. The whole range can be set on the same machine with no change parts. PLC controlled most recent innovation with variable formula information.

Sailent Features:

All operations are automatic except loading of containers on conveyers belt. Automatic collection of filled containers on collection tray/ conveyers. If there is no container the machine will not work.

Range: 5 gms to 22 gms in one syringe. 30 gms to 75 gms in one syringe.

Speed: 5 gms to 25 gms 60 to 90 Containers/ min. 30 gms to 75 gms 45 to 60 gms Containers

All contact parts are easily detachable for cleaning/sterilization. All contact parts are of Teflon and SS 304/316 quality as required.

Thermo statically controlled jacketed hopper. Optionally available in SS Stirrer.

Optionally available in rotary table for feeding of containers of conveyers belt, supplied only on customers requirement. This machine is easy to maintain & is also simple to operate.