KASHETTER INDUSTRIAL ESSENTIALS

KB Extension, Davanagere, Karnataka

M24 - Our range of M24 (24MPa) Conveyor Belts are abrasion resistant and highly resistant to cuts and gouges. These are mainly used in all mining industries and process industries such as cement (limestone), steel (crushed metallic ores), stone crushing industries (granite & blue metal).

N17 - Our range of N17 (17Mpa) Conveyor Belts are abrasion resistant, however applications not requiring the same cut and gouge resistance as that of the M24 Grade. These conveyors belts are mainly used for conveying bauxite, asbestos, ash, chalk, cement, lime, Surface coal etc.

Typical Applications :Cement, concrete plants , Sand, gravel, stone industry, Road construction machinery, Timber industry and sawmills, Coking conveyors, Broken glass / cullet, Coal handling plants, Power plants , garbage incineration plants, Silica sand or materials containing silica sand, Recycling, compost industry, mineral processing plants

Features :

Anti-tear and rip resistant qualities without any equivalent in conventional fabric conveyor belts
Special Steel wefts with high elongation and tensile strength properties arranged at a nominal pitch To break the ripping momentum; limiting any longitudinal cutting and tearing
Superior carcass protection through greater impact energy distribution across the belt widt
Exceptional fastener-holding ability if required
Pulley system modifications not required; transversal steel/fabric weft has no influence
Longer service life under heavy duty applications

Heat-resistant belts, with covers that resists cracking and hardening. Performs over the long run, retaining its flexibility despite punishing conditions and loads. Less cracking and hardening translates into longer life and reduced replacement costs. High-temperature resistance to tearing and abrasion. This reduced maintenance and downtime helps lower overall operating costs. Heat-resistant qualities after prolonged exposure to hot loads from (200-300C).

Applications :Cement industry, Steel and iron industry, Fertilizer, Chemical industry, Coking plants, Foundries, Submerged Ash Handling, Waste utilization, Glass Works

Range of Covers:1. HR T1 120 Deg C2. SHR T2 150 Deg C

Food Grade Conveyor & Elevator Belting manufactured, as per IS:1891 (Part IV); suited for handling food materials, directly on the belt surface. These belts are white in colour and do not transfer any odour or colour to the food products handles. Our Food Grade Belts are available in two distinct type of compositions, the first made from natural rubber, suited for non oil / acidic / reactive materials, and the second is the special synthetic rubber based compound suited for any oily or chemically active food products, such as meat, fruits & vegetables, free flowing sugar, any items with high moisture content, etc. Similar rubber cover grades are also available for elevator applications, such as grain handling, free flowing sugar, animal feed etc. Most popular applications, include operations in the sugar industry, tea industry, tobacco, grain elevators etc.

This belt can be supplied in cotton canvas, nylon canvas or EP canvas as carcass. Cover rubber is a blend of NR and BR, which has high elasticity, shock resistance, cold resistance etc, It can work @ -40C. Usage: Suitable for conveying materials outdoors in freezing area, cold storage, etc.

A bucket elevator can elevate a variety of bulk materials from light to heavy, and from fine to large lumps. As the belt is the heart of the complete system, we manufacture various types of elevator belts, tailored to the application requirements. We have successfully designed, manufactured and supplied, elevator belts, for over 180m height elevators, operating @1750tph

ELEVATOR - Conveyor belts are suitable for :
Sand, Gravel and Stone industry, Cement, Concrete plants, Heating stations, Power stations, Garbage incinerating plants, Asphalt mixing plants, Recycling, Compost, Mineral processing plants, Timber industry and sawmills, Farming, Warehousing, Silo feeding, Docks, Ship loading and unloading, Sugar refineries, Salt mines, potatoes and Starch factories, Foundries, Waste treatment plants,

Key Features of Continental Elevator Belts :
Tensile strengths available from 315 N/mm up to 6300 N/mmTensile members : Cotton, Nylon, EP, Kevlar, Steel CordWide range of widths available, from 100mm up to 2500mmFull range of high quality cover compounds including heat resistant, fire resistant and oil resistant, white food gradeLow elongation enabling short take-up systemsHigh bolt tear resistance and fastener strengthExcellent clamping characteristicsSmall pulley diameters

Chevron Conveyor Belts are designed for space-saving on steep inclines, even up to 40 Degrees, where they deliver increased capacity when carrying bulk materials with a lump size up to 150mm, used in varied applications, such as stone, sand, fertiliser, coal, coke clinkers, potatoes, etc.

Features:
Excellent choice for high capacity conveying at steep angles to prevent load slip or product roll backCleats integrally moulded with the top cover rubber preventing separation from the beltA large range of designs and patterns availableCleats with high abrasion resistance and elastic rubber compounds for flexibilityVarious cleat heights and widths available depending on the application requirementsUnique Pattern design ensures, that, the belt has a smooth run on conventional return idlers, so no modification of the conveyor required. A smooth transition from a conventional flat belt to a Chevron belt can be implemented.Chevron belts manufactures, in all cover grades, viz. Abrasion Resistant M24, HR, OR, FR, White Hygienic, etc.

If your application requirement is unique, and calls for a tailor made belt, our engineers can also create a custom product to fit your requirements. We have at our disposal, the worlds best, belt fabrication facility, with high pressure vulcanizing bays, punching / perforating presses, buffing & grinding machines, in-house machining and mould making.

OBMS Magnetic Separator Belts with Cleats
Tumblast Belts / Shot Blasting Belts, with Cleats and Guides.
Sidewall Conveyor Belts
Longitudinally Jointed Belts, up-to 3600mm width.
Hot vulcanized endless belts.
Perforated belts.

A combination of a team of highly skilled & experienced engineers and technicians, in conjunction with the worlds best equipment, ensures a world beating fabricated conveyor belt.

Used in coal, ore, port, metallurgical, power and chemical industries, suitable for long distance and heavy load transportation of materials. Standards offered are DIN22131, EN ISO 15236, SANS1366 and AS1333.

COVER COMPOUNDS:OBMS Magnetic Separator Belts with CleatsTumblast Belts / Shot Blasting Belts, with Cleats and Guides.Sidewall Conveyor BeltsLongitudinally Jointed Belts, up-to 3600mm width.Hot vulcanized endless belts.Perforated belts.

Our V belts do not require matching and any number of belts of the same size can be used to make a set.

This provides major advantages in:
Longer Life Reduced Inventory Better Length Stability.Anti Static, Oil & Heat Resistant Uniform Power Transmission Reduced Maintenance Requirement.Reduced Costs.

We are manufacturer of conveyor belts from 100 to 1600 mm. We almost keep stock in ready of all sizes and ply and differnt types of conveyor belts. M24, hr, shr, chevron, food grade and many more.