Kartar Valves Pvt Ltd

Kapurthala Road, Jalandhar, Punjab

We are offering resilient seated gate valves.Generally in non rising stem designavailable in outside yoke type rising stemflanged endshandwheel, cap or gear operatedavailable in pn10 & pn16isi marked as per is:14846available in cl125 as per bs:5163available in reselient seating as well as metal seating

We are offering butterfly valves.Dn 50 to dn 600, pn 10 & pn 16temperature range 34c to 150cno part in contact with fluid except disc and linerself lubricated bushesneck flange according to iso:5211direct actuator mountable designdesign reference is:13095 & bs:5155neck height to accommodate insulationlugs on body make them suitable for using at the end of linesuitable for actuator & gear mountings100% leak tight designavailable in lever type and clutch type handles

We offer swing check valves. Permits flow in one direction and closes automatically if the flow reversesstrictly conforming to international standardsavailable in integrally moulded rubber seatingwafer type sleek design to allow maximum flowepoxy coating imparts finish and resistance

We offer air valves. Releases air during charging and admits air during emptying of water main linesavailable in double orifice and single orificesingle orifice are available from 15mm to 50mm in screwed and flanged typedouble orifice are available from 40mm to 150mm in flanged type onlyrubber coated timber balls are dynamically balanced to give trouble free workingisolating valves if required are available optionally

We offer Foot Valves. Permits flow in one direction and closes automatically if the flow reversesStrictly conforming to IS : 4038Available in rubber seatingAvailable in swing type & lift type designSwing type Screwed 15mm to 150mmSwing type Flanged 50mm to 300mmLift type Screwed & Flanged 25mm to 100mmValves upto 150mm have single circular doorValves above 150mm have two semi circular doorsValve designed for almost full flow rate

We offer bronze plumbing valves. Screwed female ends to is : 554 bs : 21 iso : 7single piece design for vertical lines onlypermits flow in one direction and closes automatically if the flow reversesstrictly conforming to is : 778 class i. [isi] markedavailable in metal seating and rubber o ring seatingavailable with and without spring

We offer Steam Valves. With Integral Stainless Steel (AISI 304) strainerScrewed Female ends with BSP Parallel ThreadsTested to : 600 Psig (41.38 Kgcm) Hyd. Suitable for : Steam upto 400 Psig (27.58 Kgcm)Max. Working Temp : 425 C

Resilient Seated Gate Valve

Product Features

Generally in non rising stem design

Available in outside yoke type rising stem

Flanged ends

Handwheel, cap or gear operated

Available in PN10 & PN16

ISI Marked as per IS:14846

Available in CL125 as per BS:5163

Available in reselient seating as well as metal seating

Working & Test Pressure :

Sluice Valve PN 1.0 Sluice Valve PN 1.0 Gate Valve CI 150

Hydrostatic Test (Mpa) Body / Shell 1.5, 2.4, 3.0

Hydrostatic Test (Mpa) Seat 1.0, 1.6, 2.2

Pneumatic Test (Mpa) Seat NA, NA, 0.7

1 Bar = 0.1 Mpa = 1.019 Kg.cm2 = 14.50 PSI

Features

• Bolted Cover with Renewable Stainless Steel (AISI -410) seats
• Flanged ends to : DIN-2533 RF (PN-16)
• Body tested to : 370 Psig (26 kg/cm) Hyd.
• Seat & Back seat tested to: 230 Psig (16kg/cm) Hyd.
• Suitable for : Steam upto 13kg/cm
• Max. Working Temp : 220C

Sizes Available (in inches)1/2, 3/4, 1, 1.1/4, 1.1/2, 2, 2.1/2, 3, 4

Sizes Available (in mm)15, 20, 25, 32, 40, 50, 65, 80, 100

We are offering best sluice valves supplying company.

Product Features

Generally in non rising stem design

Available in outside yoke type rising stem

Flanged ends

Handwheel, cap or gear operated

Available in PN10 & PN16

ISI Marked as per IS:14846

Available in CL125 as per BS:5163

Available in reselient seating as well as metal seating

Working & Test Pressure :

Sluice Valve PN 1.0 Sluice Valve PN 1.0 Gate Valve CI 150

Hydrostatic Test (Mpa) Body / Shell 1.5, 2.4, 3.0

Hydrostatic Test (Mpa) Seat 1.0, 1.6, 2.2

Pneumatic Test (Mpa) Seat NA, NA, 0.7

1 Bar = 0.1 Mpa = 1.019 Kg.cm2 = 14.50 PSI

K-501 Cast Iron Sluice Valve Non Rising Stem PN 10 with cap

K-502 Cast Iron Sluice Valve Non Rising Stem PN 10 with Handwheel

K-503 Cast Iron Sluice Valve Non Rising Stem PN 16 with cap

K-504 Cast Iron Sluice Valve Non Rising Stem PN 10 with Handwheel

K-504O Cast Iron Sluice Valve Non Rising Stem PN 10 with Handwheel but for Open End Applications.

K-509 Ductile Iron Sluice Valve Non Rising Stem PN 16 with Handwheel

K-510 Ductile Iron Sluice Valve Rising Stem PN 16 with Handwheel

Application

Water, Oil, Air, Fire fighting applications, Marine applications

Kartar Valves Private Limited (Formerly M/s. Juneja Metal Works)

Juneja Complex, Village Variana, Kapurthala Road

Jalandhar - 144013, Punjab. INDIA

Phone : +91 181 2651500

Fax : +91 181 2651551

Email : info@kartarvalves.com

Copyright. Kartar Valves Private Limited. India

Site Credits : Seigospa