Oil And Lubricants #3444852

We are identified as one of prominent Fuel Oil Additive Manufacturers and Suppliers in India. Our Fuel Oil Additive is highly efficient and thus demanded in various industries. The Residue Fuel Oil Additive offered by us are available at competitive prices that too in sealed packaging.
Benefits

• Environment friendly
• Saves energy cost
• Clean burner, diffuser plates and nozzle
• Enhanced storage stability thereby no sludge formation
• Increased combustion efficiency which results in net saving of fuel oil by 3-4%
• Steady flame geometry
• Cleaner tubes ensure excellent rate of heat transfer and thus minimum cleaning frequency
• Drop in stack temperature by 4-8^oC
• Reduction in soot formation
• Reduction in emission of SPM

Dosage And Feeding

• Feeding : It is suggested that BIO-FOR-500 must be added to the prime storage tank before the fresh fuel is transformed to it due to which the agitation is caused by the transfer of oil is perfect for the BIO- FOR- 500 that assures achieving homogeneously mixed in the fuel oil.
• Packing : Minimum 20 liter i.e. Carton containing 4 HDPE cans of 5 liter each.
• Handling : Care should be taken while handling this product like vapors should not be breathed and direct contact to eyes must be avoided. Taking internally is strictly prohibited.

KARSHATI’S range of SOLUBLE OIL grades are used in manufacturing environment friendly products like light weight Autoclaved Aerated Concrete Blocks. ( AAC Block) Increasing awareness of Operating cost and % rejection of moulds has given us impetus to the development of different grades of soluble oils, as it plays very important role in controlling the rate of reactions between various ingredients like Aluminum Powder, lime , cement, silica from sand etc. To meet the growing demands of 21st century and ever evolving

construction industry, KARSHATI has developed a unique product called KVN -108 KVN-108 is a liquid admixture miscible in water and designed to suit the different quality of raw materials. During casting or green stage, controlling rate of reaction between various raw materials like Quick lime , aluminum powder and silica from Sand and cement etc is paramount to the stability of mould. KVN -108 acts as a catalyst as well as retarder. KVN- 108 contents a Plasticizer or a Super plasticizer either a non-surface active polymer or usually a blend of all to improve the bonding of particles and to prevent settling or clumping of light particles available in raw materials like sand, Aluminum Powder, quick Lime Etc. It also contains blend of some organic oils and surfactants and polymers to provide strength to cell walls at green stage inside the mass during reaction between solid mass, water and Metal Powder as well as liberation of Hydrogen gas by adjusting the surface tension of mass.Role of Soluble Oil plays a very important in prevention of mould shrinkage as it prevents the water separation from the solid mass and also plays important role in controlling the rate of reaction between various reactants like calcium (from cement & Lime) and Silica( From Cement & Sand ) which results in 1:1 nm Tobermorite( C- S-H Calcium Silicate Hydrate ) which is principal final product of AAC. Improper mixing of various ingredients in the formulation may results in un reactive Calcium Hydroxide which gives less than optimum block strength and also Lattice Shrinkage.

 

Properties:

1) Reduction in Mould shrinkage related problems

2) Helps in Regulating rate of reaction between solid mass and metal Powder.

3) Reduction in Vertical , Horizontal and Rising cracks

4) Helps in forming Uniform cell structures by homogenizes entire cake mass

5) Provides strength to cells at green stage

6) Eco friendly product

7) Increased productivity

Soluble oil for aac blocks is one of our leading product manufactured under brand name of kvn-108 and kvn-84. All the aac ( aerated autoclaved concrete ) blocks manufacturers use this product to control their breakages like raising crack, cake collapse and horizontal and vertical cracks.