High sensitivity photoelectric sensor fit to imported servo system feed material, each punching location parameter can be adjusted, high precision punching effect. Adopt import ball screw, guide rail, servo motor stepping feed material, high precision, long operating life Big power, large torque servo as punching motivity, fast punching speed, big punching motivity and punching products edge more smooth. In-sequence card collecting construction, can collect all cards in sequence and meet to customer individuation card collecting requirement.

Digital printing sheets suitable for Konica Minolta Printer include coated Digital printing pvc sheet, surface of the sheet is printable with Konica Minolta Printer , also it can be screen printed and offset printed, when laminated, strong bond strength is created between sheets digital sheet surface and coated film as well as between sheets, as a breakthrough of individualized card making and short large run card production, this technology simplified the process and lowers down the cost. Available in standard A3size & other custom sizes .Most Suitable for Identity cards, Membership Cards.

SMART-30S printer produces full-color or monochrome cards in moment and it is ideal solution to print ID cards on demand or in volume.   SMART-30S is suitable for any type of application that requires single-sided printing of ID cards such as: Employee ID cards Student IDs Payment cards Health cards Leisure resort pass cards Identification cards Transport pass cards Loyalty cards Event cards etc

• Built-in tipper unitOff-line tipping possibility (11 lines) . Ribbon saving feature.
• Communication interfaceSerial RS232 port.
• Dimensions and weight860 x 480 x 350 mm x 62 kg. (34"x19"x13,75"x138 lbs)
• Drum capacityDrum capacity: 105 characters, embossing and/or infill.
• Electrical requirements117 V / 60 Hz -220 V / 50 Hz.

• Dimension (LxWxH)L750xW650xH1100mm
• Power850W
• WeightApprox. 130 kg
• Material applicable0.3 ∼ 1.0mm PVC or other plastic material
• Punch Layout2 X 5
• Punch head number2
• Air consumption2 L/min
• Power supplyAC220V 50/60V
• Productivity3600 cards/hour

• Power6.3kW
• Heat temperature< 200
• Temp.precision+2 C < 200
• Cylinder travel260mm
• Material applicablePVC or Other Plastics
• Cylinder number & diameter1x100
• Plate layout2x5
• Oil Tank Volume35L
• Plate Number4 each for both cool and heat lamination
• Power supplyAC220V 50/60Hz 3 wires single phase
• Plate Size250x350mm
• Daylight40mm
• Productivity1000 cards/hour
• Maximum Material layers15 layers
• DimensionL750xW520xH1520mm
• Work pressure2 ∼ 15mPa adjustable
• WeightApprox 320 kg
• Pressure Precision+1.0Mpa

High sensitivity photoelectric sensor fit to imported servo system feed material, each punching location parameter can be adjusted, high precision punching effect. Adopt import ball screw, guide rail, servo motor stepping feed material, high precision, long operating life Big power, large torque servo as punching motivity, fast punching speed, big punching motivity and punching products edge more smooth. In-sequence card collecting construction, can collect all cards in sequence and meet to customer individuation card collecting requirement.

Digital printing sheets suitable for Konica Minolta Printer include coated Digital printing pvc sheet, surface of the sheet is printable with Konica Minolta Printer , also it can be screen printed and offset printed, when laminated, strong bond strength is created between sheets digital sheet surface and coated film as well as between sheets, as a breakthrough of individualized card making and short large run card production, this technology simplified the process and lowers down the cost. Available in standard A3size & other custom sizes .Most Suitable for Identity cards, Membership Cards.

SMART-30S printer produces full-color or monochrome cards in moment and it is ideal solution to print ID cards on demand or in volume.   SMART-30S is suitable for any type of application that requires single-sided printing of ID cards such as: Employee ID cards Student IDs Payment cards Health cards Leisure resort pass cards Identification cards Transport pass cards Loyalty cards Event cards etc

• Built-in tipper unitOff-line tipping possibility (11 lines) . Ribbon saving feature.
• Communication interfaceSerial RS232 port.
• Dimensions and weight860 x 480 x 350 mm x 62 kg. (34"x19"x13,75"x138 lbs)
• Drum capacityDrum capacity: 105 characters, embossing and/or infill.
• Electrical requirements117 V / 60 Hz -220 V / 50 Hz.

• Dimension (LxWxH)L750xW650xH1100mm
• Power850W
• WeightApprox. 130 kg
• Material applicable0.3 ∼ 1.0mm PVC or other plastic material
• Punch Layout2 X 5
• Punch head number2
• Air consumption2 L/min
• Power supplyAC220V 50/60V
• Productivity3600 cards/hour

• Power6.3kW
• Heat temperature< 200
• Temp.precision+2 C < 200
• Cylinder travel260mm
• Material applicablePVC or Other Plastics
• Cylinder number & diameter1x100
• Plate layout2x5
• Oil Tank Volume35L
• Plate Number4 each for both cool and heat lamination
• Power supplyAC220V 50/60Hz 3 wires single phase
• Plate Size250x350mm
• Daylight40mm
• Productivity1000 cards/hour
• Maximum Material layers15 layers
• DimensionL750xW520xH1520mm
• Work pressure2 ∼ 15mPa adjustable
• WeightApprox 320 kg
• Pressure Precision+1.0Mpa