Hose Pipes #5756725

KANTA SYSTEM of Drill Master Rock drilling hose is intended for carrying compressed air at the pressure of 1.4 Mpa (14.28Kg/sq.cm) 200 psi for hard out door applications like drilling the Rock mines, & Quarries and at the temperature shall not exceed 80 degree C.

KANTA SYSTEM of Gas flow welding hose is intended for carrying the gases of Oxygen & other non-combustible gas in Blue/Black colour and Acetylene & Fuel gas in Red colour of 1.25 Mpa (12.75Kg/sq.cm) 180 psi at maximum of 60 degree C temperature.

KANTA SYSTEM of EPDM Rubber Steam hose is intended for general steam/ hot water service to clean oil, grease etc in Refineries, and clean the bacteria, fungus in food industries and curing in retreading industries.

KANTA SYSTEM of Non-conductive (Carbon free) heat resistant rubber hoses are generally used in high temperature furnace, mostly in steel industries, as cable coolant application. The outer cover is protected from external temperature covered by asbestos woven fabric or asbestos braids.

KANTA SYSTEM of Sand& Shot Blasting hose is intended for carrying Sand /Shots or Girds through compressed air from the hopper or other suitable equipment at the pressure of 100 psi/150 psi velocity at the temperature shall not exceed 80 degree C for cleaning the metal surfaces from rust, dust & other impurities. Gird blasting is recommended for removing the layers of concrete surfaces.

KANTA SYSTEM of Chemical discharging hose is intended for discharging the chemicals such as mineral acids, alkalis, and aqueous solutions of inorganic salts at the maximum pressure of 1Mpa.

KANTA SYSTEM of Oil Suction & Discharge hose is for use in On-shore, Off-shore & Dock operations for Petroleum and blended products having low aromatic hydrocarbons contents and Non-toxic edible oil products for the temperature ranging from 20 to + 120 degree Centigrade.

KANTA SYSTEM of Chemical loading & un-loading Hose is intended for loading & un-loading of chemicals from storage tank into lorry tanker or Railway wagon vice versa, at maximum of 7 Kg/cm² pressure (100 psi).

KANTAFLEX Sand & Gravel Suction & Discharge hose is intended for suction & discharge service of abrasion particles like sand, mining particles, mud slurry, and waste water with slurries at maximum of 1.6Mpa (16kg/cm2) is 225 psi pressure & 100 degree C temperature.