• InputPowered from Battery Under Test

Battery capacity"  is a measure of the charge stored by the battery, and is determined by the mass of active material contained in the battery. The Amp Hour (AH) specification provides a measurement of battery capacity.The battery capacity represents the maximum amount of energy that can be extracted from the battery under certain specified conditions. So how many amp-hours of capacity does your battery really have? Find out with Battery Capacity Tester. These tests are helpful for relative comparisons and battery analysis. In this method a fully charged battery is discharged with a constant current up to the voltage level below which battery is considered as fully discharged. In this test user needs to set parameters like Battery cutoff Voltage and a test current. Current setting is dependant on expected rate of discharge. At the end of test, machine gives you the reading of exact Ah capacity extracted from the battery.

Input Voltage : 230Vac 50Hz(typical) 180Vac 50Hz(Min) 260Vac 50Hz(Max) Input Current : 0.1 Ampere(Max) @ typical Input voltage Charging Cutoff Voltage : 14.2V(Only for VRLA Mode) Charging Voltage : 16VDC(Max) for Flooded Mode Charging Current : 1.2Ampere(Max) @ typical Input voltage

Kanaad portable load testers are designed specially for on site battery testing need. It is useful for finding general battery health.Now a day usage of battery is increased so much. Battery systems are installed in a remote areas far away from cities. So to attend faults in such systems is needed that testing machine should be portable and should tell you precise condition of battery. By keeping this in mind during design we focused on portability of the tester as well as accuracy of results. It comes with a handy bag so that it is easy to carry anywhere.

• InputPowered from Battery Under Test
• LoadMax.120 Amp
• Max.120 AmpCombination of instant and Backup
• CoolingForced Air cooling

• Size300 x 250 x 180
• Weight3.2k.g
• InputPowered from Battery Under Test
• LoadMax.600 Amp
• Test3X Load HRD test
• CoolingForced Air cooling

• Charging Current1.2Ampere(Max) @ typical Input voltage
• Input Voltage230Vac 50Hz(typical) 180Vac 50Hz(Min) 260Vac 50Hz(Max)
• Input Current0.1 Ampere(Max) @ typical Input voltage
• Charging Cutoff Voltage14.2V(Only for VRLA Mode)
• Charging Voltage16VDC(Max) for Flooded Mode

• InputPowered from Battery Under Test

Battery capacity"  is a measure of the charge stored by the battery, and is determined by the mass of active material contained in the battery. The Amp Hour (AH) specification provides a measurement of battery capacity.The battery capacity represents the maximum amount of energy that can be extracted from the battery under certain specified conditions. So how many amp-hours of capacity does your battery really have? Find out with Battery Capacity Tester. These tests are helpful for relative comparisons and battery analysis. In this method a fully charged battery is discharged with a constant current up to the voltage level below which battery is considered as fully discharged. In this test user needs to set parameters like Battery cutoff Voltage and a test current. Current setting is dependant on expected rate of discharge. At the end of test, machine gives you the reading of exact Ah capacity extracted from the battery.

Input Voltage : 230Vac 50Hz(typical) 180Vac 50Hz(Min) 260Vac 50Hz(Max) Input Current : 0.1 Ampere(Max) @ typical Input voltage Charging Cutoff Voltage : 14.2V(Only for VRLA Mode) Charging Voltage : 16VDC(Max) for Flooded Mode Charging Current : 1.2Ampere(Max) @ typical Input voltage

Kanaad portable load testers are designed specially for on site battery testing need. It is useful for finding general battery health.Now a day usage of battery is increased so much. Battery systems are installed in a remote areas far away from cities. So to attend faults in such systems is needed that testing machine should be portable and should tell you precise condition of battery. By keeping this in mind during design we focused on portability of the tester as well as accuracy of results. It comes with a handy bag so that it is easy to carry anywhere.

• InputPowered from Battery Under Test
• LoadMax.120 Amp
• Max.120 AmpCombination of instant and Backup
• CoolingForced Air cooling

• InputPowered from Battery Under Test
• LoadMax.600 Amp
• Test3X Load HRD test
• CoolingForced Air cooling
• Size300 x 250 x 180
• Weight3.2k.g

• Input Voltage230Vac 50Hz(typical) 180Vac 50Hz(Min) 260Vac 50Hz(Max)
• Input Current0.1 Ampere(Max) @ typical Input voltage
• Charging Cutoff Voltage14.2V(Only for VRLA Mode)
• Charging Voltage16VDC(Max) for Flooded Mode
• Charging Current1.2Ampere(Max) @ typical Input voltage