• Unique design based on Panel Type construction
• No water logging in the tubes
• Steam header at the top and a condensate collection header at the bottom
• Vertical fin tubes for natural drain off
• Steam air heater tube bundle allows free expansion
• Design & manufacture for low, medium or high pressure steam under Indian Boiler Regulations (IBR)

Distillation Trays & Column Internals are widely used for separation of mixtures. Distillation is one of the key unit operations in the Refining, Petro-Chemical, Fertilizer and Chemicals Industry. Kamal is a leading manufacturer of Distillation Trays & Column Internals offering design, fabrication and installation services to our valued customers including UOP LLC., Indian Oil Corporation (IOCL), Bharat Petroleum Corporation (BPCL), Hindustan Petroleum Corporation (HPCL), Gas Authority of India (GAIL), etc. The range of trays manufactured by Kamal are:

• Valve
• Sieve
• Bubble Cap
• Chimney
• Multi - Down comer Trays (UOP)

At Kamal, we also manufacture Inlet feed device and structured packings. With our facilities, we can manufacture trays and internals of various sizes and type. Kamal has the capabilities to handle Austenitic and Ferritic Stainless Steels, Carbon Steel, Monel, and various other materials as per client requirement. We can supply our standard valve trays (with EIL Hydraulic design) or special trays in accordance with owner / licensors hydraulic designs.

A butterfly damper is generally used to isolate or regulate the flow with quarter turn movement of blade. These are two-way flow dampers normally with a single blade on a central shaft.

Multi-louver damper is made up of various blades which rotate on their central shaft. All the blades are connected through linkages. The multi-louver damper can be used for isolating or regulating the flow with quarter turn movement of blade. These are two way flow damper. Generally on-off duty multi-louver damper are parallel blades and control/ regulating duty multi-louver damper are opposed blades type.

These dampers are designed for automatic opening/closing of blades when there is no duct pressure. These are in circular, square and rectangular shape.

Ignitor Guns & Pilot Burners (Mains / Battery Operated) The users of the earlier designed Ignition systems (by others) were continuously encountering the following problems: -

• Failure of Electrodes
• Failure of Transformer
• Failure of HT Cable
• High Cost and Long Delivery of Spares

Reliable, affordable and easy to maintain high tension type Ignitors manufactured by Kamal incorporate some very unique features. The Integral design, (HT transformer is integral with Ignitor / Pilot Burner) eliminates problems associated with remote HT design. The HT transformer provides a high density current impulse to the induction coil. It is rated for continuous duty and is short circuit protected. The HV transformer comes with short circuit protection, low weight, is totally enclosed and has high reliability. Other notable features are:

• Ignitor / Pilot Burner special material of construction makes it reliable and easy to maintain
• HT electrode is fully insulated to avoid discharge at any undesirable point
• A cartridge type special electrode capable of withstanding high temperature and resistant to high voltage / current
• The special insulation ensures protection against failure due to short circuiting
• Tip of the electrode made of special material to ensure long life
• Specially designed, CMRI certified (IIA / IIB or IIC) enclosures for housing the HV, Transformer & Battery / Mains circuit
• Easy availability of spares transformer and Battery / Mains circuit.

The Ignitor Guns supplied by Kamal are working satisfactorily in Process furnaces at various Refineries, Gas processing & Fertilizer units amongst others.

Sluice Gates are used to control the flow of fluid through openings under a face or seating head and openings under a back or unseating head. With 25 years of extensive experience in the field of design, manufacture and full service site capabilities of Dampers, Guillotines and Gates for domestic and International markets Kamal now offers a wide variety of Water Control Gates for floodwater, wastewater treatment, environmental water treatment, irrigation, dam projects, hydroelectric plants, etc. No matter what type or size of gates your project demands, Kamals Cast Iron or Fabricated Gates can be designed and supplied to meet your requirements. These Gates can be offered from standard configurations to custom designs with your choice of actuator drive mechanisms. Kamal capabilities include a Cast Iron foundry (90, 000 sq. ft.) for casting of gates from small to very large sizes. A completely equipped machine shop complements the foundry for machining requirement. At an adjoining facility a full capability fabrication unit (85, 000 sq. ft.) is located with facilities such as cutting, bending, CNC press, welding, drilling, testing, quality assurance, packing, etc. All the critical functions are housed within the company facilities for efficient execution with no compromise on materials and quality. Stringent quality checks are maintained at every level by the internal quality team. With approvals from various process licensors across the world Kamal castings and products are globally accepted for their high quality and precision manufacturing.

Dampers & Guillotines for Oil Refineries, Petrochemical, Power, Fertilizer, Steel and Aluminum Plants. Having collaboration with Ms Metrio Technologie International BvbA (MTI), Netherlands for transfer of technology of Dampers & Isolation Valves, Kamal has supplied over 2, 500 Dampers & Guillotines in India and The Middle East. Kamals product range includes:

Sugar Grass Hoppers is one of Kamals specialty items having supplied more than 1000 such Hoppers. Kamal Hoppers have been accepted and received well by the industry. These hoppers are made as per the customer process requirement.We are committed to work continuously towards design improvement with total emphasis on ease of maintenance during use and their efficiency.The swift performance and durability of the machines have made Kamal a reliable name among sugar machine manufacturers,

Leading companies engaged in the design and manufacture of Dampers & Guillotines for Oil Refineries, Petrochemical, Power, Fertilizer, Steel and Aluminum Plants. Having collaboration with Ms Metrio Technologie International BvbA (MTI), Netherlands for transfer of technology of Dampers & Isolation Valves, Kamal has supplied over 2, 500 Dampers & Guillotines in India and The Middle East. Kamals product range includes

Multi-louver damper is made up of various blades which rotate on their central shaft. All the blades are connected through linkages. The multi-louver damper can be used for isolating or regulating the flow with quarter turn movement of blade. These are two way flow damper. Generally on-off duty multi-louver damper are parallel blades and control regulating duty multi-louver damper are opposed blades type.

These type of dampers are generally used for 100% isolation across duct. Atmospheric air at a higher pressure than gases flowing in the duct is injected inside the cavity of damper by seal air system that guarantees no leakage across the duct. These are two-way flow dampers. Generally with on-off duty application but control duty can be provided, as per client requirements

These types of dampers are mainly used for isolation of equipment to permit inspection, maintenance or repair in addition to process isolation. They are generally rack-pinion/ screw or chain type. Screw type design is available in rising or non-rising movement. Where available space is constraint than non rising design is recommended.

Sugar Elevator is also one of the other specialty items being manufactured by Kamal Engineering having supplied more than 600 sugar elevators, which have been well appreciated within the industry. Sugar elevator is either driven by Chain or Belt, with buckets of Mild Steel, Galvanized Mild Steel, SS202, SS304 and PVC.

• Unique design based on Panel Type construction
• No water logging in the tubes
• Steam header at the top and a condensate collection header at the bottom
• Vertical fin tubes for natural drain off
• Steam air heater tube bundle allows free expansion
• Design & manufacture for low, medium or high pressure steam under Indian Boiler Regulations (IBR)

Distillation Trays & Column Internals are widely used for separation of mixtures. Distillation is one of the key unit operations in the Refining, Petro-Chemical, Fertilizer and Chemicals Industry. Kamal is a leading manufacturer of Distillation Trays & Column Internals offering design, fabrication and installation services to our valued customers including UOP LLC., Indian Oil Corporation (IOCL), Bharat Petroleum Corporation (BPCL), Hindustan Petroleum Corporation (HPCL), Gas Authority of India (GAIL), etc. The range of trays manufactured by Kamal are:

• Valve
• Sieve
• Bubble Cap
• Chimney
• Multi - Down comer Trays (UOP)

At Kamal, we also manufacture Inlet feed device and structured packings. With our facilities, we can manufacture trays and internals of various sizes and type. Kamal has the capabilities to handle Austenitic and Ferritic Stainless Steels, Carbon Steel, Monel, and various other materials as per client requirement. We can supply our standard valve trays (with EIL Hydraulic design) or special trays in accordance with owner / licensors hydraulic designs.

A butterfly damper is generally used to isolate or regulate the flow with quarter turn movement of blade. These are two-way flow dampers normally with a single blade on a central shaft.

Multi-louver damper is made up of various blades which rotate on their central shaft. All the blades are connected through linkages. The multi-louver damper can be used for isolating or regulating the flow with quarter turn movement of blade. These are two way flow damper. Generally on-off duty multi-louver damper are parallel blades and control/ regulating duty multi-louver damper are opposed blades type.

These dampers are designed for automatic opening/closing of blades when there is no duct pressure. These are in circular, square and rectangular shape.

Ignitor Guns & Pilot Burners (Mains / Battery Operated) The users of the earlier designed Ignition systems (by others) were continuously encountering the following problems: -

• Failure of Electrodes
• Failure of Transformer
• Failure of HT Cable
• High Cost and Long Delivery of Spares

Reliable, affordable and easy to maintain high tension type Ignitors manufactured by Kamal incorporate some very unique features. The Integral design, (HT transformer is integral with Ignitor / Pilot Burner) eliminates problems associated with remote HT design. The HT transformer provides a high density current impulse to the induction coil. It is rated for continuous duty and is short circuit protected. The HV transformer comes with short circuit protection, low weight, is totally enclosed and has high reliability. Other notable features are:

• Ignitor / Pilot Burner special material of construction makes it reliable and easy to maintain
• HT electrode is fully insulated to avoid discharge at any undesirable point
• A cartridge type special electrode capable of withstanding high temperature and resistant to high voltage / current
• The special insulation ensures protection against failure due to short circuiting
• Tip of the electrode made of special material to ensure long life
• Specially designed, CMRI certified (IIA / IIB or IIC) enclosures for housing the HV, Transformer & Battery / Mains circuit
• Easy availability of spares transformer and Battery / Mains circuit.

The Ignitor Guns supplied by Kamal are working satisfactorily in Process furnaces at various Refineries, Gas processing & Fertilizer units amongst others.

Sluice Gates are used to control the flow of fluid through openings under a face or seating head and openings under a back or unseating head. With 25 years of extensive experience in the field of design, manufacture and full service site capabilities of Dampers, Guillotines and Gates for domestic and International markets Kamal now offers a wide variety of Water Control Gates for floodwater, wastewater treatment, environmental water treatment, irrigation, dam projects, hydroelectric plants, etc. No matter what type or size of gates your project demands, Kamals Cast Iron or Fabricated Gates can be designed and supplied to meet your requirements. These Gates can be offered from standard configurations to custom designs with your choice of actuator drive mechanisms. Kamal capabilities include a Cast Iron foundry (90, 000 sq. ft.) for casting of gates from small to very large sizes. A completely equipped machine shop complements the foundry for machining requirement. At an adjoining facility a full capability fabrication unit (85, 000 sq. ft.) is located with facilities such as cutting, bending, CNC press, welding, drilling, testing, quality assurance, packing, etc. All the critical functions are housed within the company facilities for efficient execution with no compromise on materials and quality. Stringent quality checks are maintained at every level by the internal quality team. With approvals from various process licensors across the world Kamal castings and products are globally accepted for their high quality and precision manufacturing.

Dampers & Guillotines for Oil Refineries, Petrochemical, Power, Fertilizer, Steel and Aluminum Plants. Having collaboration with Ms Metrio Technologie International BvbA (MTI), Netherlands for transfer of technology of Dampers & Isolation Valves, Kamal has supplied over 2, 500 Dampers & Guillotines in India and The Middle East. Kamals product range includes:

Sugar Grass Hoppers is one of Kamals specialty items having supplied more than 1000 such Hoppers. Kamal Hoppers have been accepted and received well by the industry. These hoppers are made as per the customer process requirement.We are committed to work continuously towards design improvement with total emphasis on ease of maintenance during use and their efficiency.The swift performance and durability of the machines have made Kamal a reliable name among sugar machine manufacturers,

Leading companies engaged in the design and manufacture of Dampers & Guillotines for Oil Refineries, Petrochemical, Power, Fertilizer, Steel and Aluminum Plants. Having collaboration with Ms Metrio Technologie International BvbA (MTI), Netherlands for transfer of technology of Dampers & Isolation Valves, Kamal has supplied over 2, 500 Dampers & Guillotines in India and The Middle East. Kamals product range includes

Multi-louver damper is made up of various blades which rotate on their central shaft. All the blades are connected through linkages. The multi-louver damper can be used for isolating or regulating the flow with quarter turn movement of blade. These are two way flow damper. Generally on-off duty multi-louver damper are parallel blades and control regulating duty multi-louver damper are opposed blades type.

These type of dampers are generally used for 100% isolation across duct. Atmospheric air at a higher pressure than gases flowing in the duct is injected inside the cavity of damper by seal air system that guarantees no leakage across the duct. These are two-way flow dampers. Generally with on-off duty application but control duty can be provided, as per client requirements

These types of dampers are mainly used for isolation of equipment to permit inspection, maintenance or repair in addition to process isolation. They are generally rack-pinion/ screw or chain type. Screw type design is available in rising or non-rising movement. Where available space is constraint than non rising design is recommended.

Sugar Elevator is also one of the other specialty items being manufactured by Kamal Engineering having supplied more than 600 sugar elevators, which have been well appreciated within the industry. Sugar elevator is either driven by Chain or Belt, with buckets of Mild Steel, Galvanized Mild Steel, SS202, SS304 and PVC.