Our Product / Services
Jigs, Casting Dies, Die Casting Moulds & Moulding Tools
2 Products availableCastables
2 Products availableIndustrial Chemicals
2 Products availableWe are leaders in the market for providing best range of Sand, Washed Sand, Silica Sand and Chromite Sand
These are the sized sand grain particle made after proper cleaning and screening and is used in various purposes.
Additional Information:
Payment Terms : L/C, T/T,
Packaging Details : As per need
Delivery Time : immediate
These are high quality washed sand and being used for various purposes.These comes in different sizes.
Additional Information:
Payment Terms : L/C, T/T,
Packaging Details : As per Order
Delivery Time : 30 Days
Silica is the most abundant mineral found in the crust of the earth. It forms an important constituent of practically all rock-forming minerals. Specification: AFS 40/45 Grade SiO2 - 95% Max Clay - 0.5% Max Moisture (dry) - 0.4% Max Sodium Chloride - 0.01% Max Iron Content - 0.015%.
The sand we offer complies with quality standards and shows off precise composition. Its physical and chemical attributes are ensured to be the same as desired. And its quality is tested by us in an impeccable manner. Besides, we offer it enclosed in safe packages and in demanded quantities – whether in bulk – to the global market.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : As per need
Delivery Time : 15 days
Standard Specification
Chemical Composition of Glass Gradesilica Sand
SiO2 | 98.50% Min. |
---|---|
Fe2O3 | 0.045% Max. |
AI2O3 | 0.6% Max. |
Cao | 0.15% Max. |
MgO | 0.1% Max. |
Lol | 0.5% Max. |
Moisture Content | 0.5% Max. (Dry) and 5% Max. For wet Sand |
Granulometric Configuration of Glass Grade Silicasand
+25 BSS | Nil |
---|---|
-100 BSS | 10% Max. |
-120 BSS | 5% Max. |
Chemical Composition of Foundry Grade Silica Sand
SiO2 | 98.50% Min |
---|---|
Fe2O3 | 0.20% max. |
AI2O3 | 0.70% Max. |
Cao | 0.20% Max. |
TiO2 | 0.08% Max. |
MgO | 0.08% Max. |
PH Value | 7% Max. |
Moisture | 0.5% Max. (Dry Sand) and 5% Max. for Wet Sand |
Clay | 0.2% to 0.5% depending on customer requirement. |
LOl | 0.50% Max. |
ADV (CC) | 5 Malmax (N/10HCL - 50 gms Sand) |
An Induction furnace ramming material made from Dead Burnt Magnesite clinker in association with Chrome. Specially bonded with clays and other chemical binders to achieve the desired sintering characteristics. These are used in induction furnace for Basic Lining
This material is also designed for repairing the cracks and other erosion that occurs in the lining during usage. It possesses good workability and has no shrinkage upto 1650°C and has good erosion resisting properties. The chemical composition is similar to the ramming mass but the grading/ binder is different for good workability.
Product SpecificationMgO - 70% min, Cr2O3 - 8min, SiO2 - 8%max, CaO - 2% maxSieve Distribution 0-1 and 0-2 mm
Additional Information:
Payment Terms : T/T
Packaging Details : As per Need
Delivery Time : 15 Days