Our Products
Level Transmitters
2 Products availableStained, Etched & Laminated Glass
1 Products availableFlow Meters
1 Products availableFlanges
1 Products availableTransmitter Device
1 Products availableLeading Manufacturer, Supplier & Retailer of Displacer Level Switch, Conductivity Level Switch, mini level switch, Cable Float Switch and Side Mounted Magentic Level Switch.
These Switches are the most versatile for level control and have advantages over float type switches in the control of agitated liquids paints-varnishes & heavy oil and foaming liquids. The Displacer weight is heavier than the liquid which is suspended by a spring. When the liquid rises the displacer looses the weight, this causes the spring to retract slightly to a new equilibrium position. This retracts of the spring interchanges the position of the Magnet provided at the top and actuates the switch. Upto three independent switch junctions are available in the single unit, with broad choice of operating sequences. These are flange mounted and are available with a choice of material of construction. |
This water level sensor is conducive for liquids that have a conductivity of equal to or more than 25m Siemens. It is your best choice for a water level switch. The system is economical to install as no special cable is required for signal transmission. The level probe and the evaluation unit can be connected using a long cable. The AC is provided on the probe for preventing electrode deterioration. You can choose from among a variety of level control and installation systems such as:- |
|
Offered in both vertical and horizontal configurations, the general purpose mini-float level switches provide reliable liquid level detection of clean water and chemical solutions with a 15VA or 30VA reed switch output. Media examples include water and sulfuric acid. The polypropylene or PVDF liquid level sensors are mounted vertically inside the tank or horizontally through the tank wall as a high level alarm or low level alarm. |
It is a simple and reliable technique for continuous level indication and control of any liquid, chemically compatible with the (sensor) material, unaffected by electrical conductivity, temperature, pressure or viscosity. The float is designed for variety of liquids and its unique self cleaning construction is well suited for even sticky or dirty environments with no float hang-ups. |
"KiT" Magnetic Level Switch (side mounted 1ype) is float-operated working on magnetic repulsion principle. Simple in design and robust in construction together with strict quality control makes the switch a very reliable product.
This can be used for initiating high or low audio-visual signals or automatic level control of liquids in pressurized or open tanks. containers, hot water service, sterilizing equipment and a variety of process control fluid tanks.
The purpose of this guide is to provide a general resource for the selection of materials for the magnetic flowmeter. One of the advantages of the electromagnetic flowmeter is that it is suitable for a wide variety of applications including severely corrosive chemicals and highly abrasive slurries. The key to this versatility is that there is a large choice of materials available for the electrodes and the flowtube liner. |
Additional Information:
Payment Terms : T/T
Packaging Details : Export Worthy Packing
Delivery Time : Within a Week