Kabir Instruments & Technology

Makarpura, Vadodara, Gujarat

Located in Vadodara, Gujarat, India, we are a proficient manufacturer and supplier of Bypass Rotameter. The Bypass Rotameter is used to measure the flow rate of liquid and gases. The entire assembly of the product has an orifice plate, by-pass piping with isolation valves, carrier rings and indicator. The product is easy to maintain, has online installation, and has full flow with accuracy of ±2%. Also, the Rotameter comes with high and low flow alarm solution.

 

Details :

• KabirMake By- pass Rotameter as designed for measurement of flow rate of Liquid and gases in 2” NB or higher Size pipe sine. The complete assembly consist of carrier rings [orifice Flanges], orifice Plate, by-pass piping with Isolation valves & a Rotameter as indicator. The orifice plate is design on IS of BS specification.
• These meters are selected for low cost measurement of high flow rates generally in the 2” and larger sizes. It provides linear measurements of fluid in conjunction with an orifice plate in the main line. The Rotameter is modified to include a range orifice which is sized so that the flow through the meter at the maximum pressure drops across the orifice plate in necessary to lift the float to the maximum position. Hence the flow through the range orifice is proportional to the instantaneous flow through the main orifice and so the bypass Rotameter measure main line flow.

 

Features :-

• Easy to maintain , On-line installation , Very low cost , Accuracy : ± 2 % of full flow , Rangeability: 7:1 of 5 : 1

• Accessories - High & low flow Alarm solution

 

MOC [Material of Construction)

• Orifice Plate - S S 316 Or PVC Or Teflon
• Carrier Ring - S S 316 Or Mild Steel Or P P Or PVC
• Pipe line - S S 316 Or G I (M.S) Or PVC
• Wetted parts of Rota meter - S S 316 Or Mild Steel Or Teflon Lined , P.P.

 

Flow Ranges of water :- SizeMaxi Flow Rate In -

• 50 NB 20 M³/Hr
• 80 NB 36 M³/Hr
•  100 NB 115 M³/Hr
•  125 NB 125 M³/Hr
•  150 NB 210 M³/Hr
•  200 NB 320 M³/Hr
•  250 NB 550 M³/Hr
•  300 NB 880 M³/Hr

 

Data Required for Offer :-

• Service Name of fluid , Sp. Gr of Fluid at Operating Condition , Viscosity of Fluid at Operating Condition,
• Operating Temperature, Operation Pressure , Material of construction, Main Pipe Line’s ID , Flanges size & Details, Range i.e. maxi & min. flow rate Measuring, We reserve the right to modify the design & specification without any notice.

We are offering rotameters.kabir make acrylic body rotameters are mainly used for water salt water, air, nitrogen, hydrogen, natural gas application. These are integrally machined cut in acrylic body from imported transparent acrylic blocks sheets. These are also suited with flanged or screwed connections and several options of material for the wetted parts. All our products are developed as per industry norms, using premium raw material and latest technology. In addition to this, our products can be customized as per the specifications detailed by the customers. :- metering tube : solid acrylic block.Body : imported transparent acrylic block.Wetted parts : m.s. s.s. p.p. teflon.End connection : s.s. 304316pvcppmsscale : engraved on body.Packing : neoprene teflon silicon. :- model : kitabrtemperature : max 70cpressure : max 15 kgcmavailable sizes : 15 nb to 100 nbflow ranges : 2.5 to 40, 000 lph of water at ambient temperature and 0.1 to 750 nmhr of air at ntpend connection : screwed flanged hose nippleorientation : bottom top rear rear accuracy : 2% of fsdaccessories : high & low flow alarms

Located in Vadodara, Gujarat, India, we are a prominent manufacturer and supplier of Metal Tube Rotameter. The Metal Tube Rotameter is used for measurement of gas and liquid flow under all levels of pressure and temperature. The metal tube, orifice and float are lined with PTFE to prevent the corrosion. Also, this product has optional limit switches and has 4-20mA output. Contact us to strike a great deal.

 

Details : Kabir make Metal Tube Rota meter is a variable area flow meter Model KIT series is suitable for gas and liquid flow measurement even under high pressure and high temperature. Standard flow tube is in SS 316 and for corrosive applications the metal tube, orifice and float can be lined with PTFE. KIT series Metal Tube Rotameter comes with optional limit switches and 4-20ma output.

We are a leading manufacturer and supplier of Glass Tube Rotameter located in Vadodara, Gujarat, India. The Glass Tube Rotameter is used in rate flow indication measurement. In this Rotameter, the float moves up and down according to the fluid flow direction in the tapered Borosilicate Glass Tube. This indication by the position of the float measures the instantaneous flow rate. Also, we offer the product at market leading prices.

 

Details : “Kabir”manufactures Variable Area Flowmeters (Rotameters) which are mainly used for Liquid & Gas applications for measurement of Rate of Flow indication. The Float moves up & down in the tapered Borosilicate Glass Tube with fluid flow from bottom to top. The Float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

 

kabir make metal tube rota meter is a variable area flow meter model kit series is suitable for gas and liquid flow measurement even under high pressure and high temperature. Standard flow tube is in ss 316 and for corrosive applications the metal tube, orifice and float can be lined with ptfe. Kit series metal tube rotameter comes with optional limit switches and 4-20ma output. suitable for fluid : liquids & gasesdensity sp. Gravity : up to 2.95viscosity : up to 200 cpdesign temperature : up to 150cdesign pressure : up to 25 kgcmmeasuring range : 100 to 40, 000 lph of waterliquid3.3 to 1400 nmhr of airgas at ntpline size : up to 4" nbavailable materials : ss304ss304lss316ss316lptfe lined on ssconnection : flanged to asabsdin tri-clover, standardscrewed to bspnpt(mf)accuracy : 2% of f.s.d. & 1.0% on request

kabir make acrylic body rotameters are mainly used for water salt water, air, nitrogen, hydrogen, natural gas application. These are integrally machined cut in acrylic body from imported transparent acrylic blocks sheets. These are also suited with flanged or screwed connections and several options of material for the wetted parts. All our products are developed as per industry norms, using premium raw material and latest technology. In addition to this, our products can be customized as per the specifications detailed by the customers. :- metering tube : solid acrylic block.Body : imported transparent acrylic block.Wetted parts : m.s. s.s. p.p. teflon.End connection : s.s. 304316pvcppmsscale : engraved on body.Packing : neoprene teflon silicon. :- model : kitabrtemperature : max 70cpressure : max 15 kgcmavailable sizes : 15 nb to 100 nbflow ranges : 2.5 to 40, 000 lph of water at ambient temperature and 0.1 to 750 nmhr of air at ntpend connection : screwed flanged hose nippleorientation : bottom top rear rear accuracy : 2% of fsdaccessories : high & low flow alarms

kabir make metal tube rota meter is a variable area flow meter model kit series is suitable for gas and liquid flow measurement even under high pressure and high temperature. Standard flow tube is in ss 316 and for corrosive applications the metal tube, orifice and float can be lined with ptfe. Kit series metal tube rotameter comes with optional limit switches and 4-20ma output. suitable for fluid : liquids & gasesdensity sp. Gravity : up to 2.95viscosity : up to 200 cpdesign temperature : up to 150cdesign pressure : up to 25 kgcmmeasuring range : 100 to 40, 000 lph of waterliquid3.3 to 1400 nmhr of airgas at ntpline size : up to 4" nbavailable materials : ss304ss304lss316ss316lptfe lined on ssconnection : flanged to asabsdin tri-clover, standardscrewed to bspnpt(mf)accuracy : 2% of f.s.d. & 1.0% on request

kabir manufactures variable area flowmeters (rotameters) which are mainly used for liquid & gas applications for measurement of rate of flow indication. The float moves up & down in the tapered borosilicate glass tube with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The vertical position of the float as indicated by scale is the measure of the instantaneous flow rate. :- end fittings : - ms, cs, ss304, ss316, cf8m, cf8, c.i. Ptfe lined, c.i. Ss lined, pvc and any other desired material subject to its availability. Tube :- borosilicate glass.Float :- ss 316, ptfe and other on request.Packing :- neoprene, ptfe, silicon, viton.Frame & cover :- ms, optionally ss. :- accuracy :- +- 2% f.s.d. temperature ratings: - maximum operating temperature rating is 121 o c for gas services and 93o c for liquid services.Repeatability : - 0.5 % rangebility : - 10:1 connections : - flanged or screwed or triclover joint or hose nipple. enclosure : - ip 55 or ip 65 on request.Scale length : - 220 mm.Pressure ratings :-

We are one of the largest manufacturers and suppliers of Purge Rotameter located in Vadodara, Gujarat, India. The Purge Rotameter is used for water, air and nitrogen purging application. This product id suited for screwed connections with orientation of rear and has several options of material for the wet parts. There is fitting of Constant Upstream and Constant Downstream D.P. regulator. We develop these products conforming to the international standards and industry norms.

 

Details : "Kabir” make Purge Glass Tube/Acrylic Rotameters are mainly used for Water, Air, Nitrogen, Purging application. These are suited with Screwed connections with orientation of Rear & Rear and several options of material for the wetted parts. Also these are optionally fitted with Constant Up - stream OR Constant Down - stream D.P.Regulator. All our products are developed as per industry norms, using premium raw material and latest technology. In addition to this, our products can be customized as per the specifications detailed by the customers.

Based in Vadodara, Gujarat, India, we are one of the most leading manufacturers and suppliers of Acrylic Body Rotameter. This Acrylic Body Rotameter is used in water or salt water, air, nitrogen, hydrogen and natural gas applications. The body of the Rotameter is made up of acrylic block sheets and is suited along with flanged and screwed connections. These products are developed as per the industry norms, using the most superior raw material and advanced technology. 

Detais - “Kabir” make Acrylic Body Rotameters are mainly used for Water / Salt Water, Air, Nitrogen, Hydrogen, Natural Gas application. These are integrally machined cut in acrylic body from imported transparent acrylic blocks sheets. These are also suited with flanged or screwed connections and several options of material for the wetted parts. All our products are developed as per industry norms, using premium raw material and latest technology.

 

In addition to this, our products can be customized as per the specifications detailed by the customers.

kabir manufactures variable area flowmeters (rotameters) which are mainly used for liquid & gas applications for measurement of rate of flow indication. The float moves up & down in the tapered borosilicate glass tube with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The vertical position of the float as indicated by scale is the measure of the instantaneous flow rate. :- end fittings : - ms, cs, ss304, ss316, cf8m, cf8, c.i. Ptfe lined, c.i. Ss lined, pvc and any other desired material subject to its availability. Tube :- borosilicate glass.Float :- ss 316, ptfe and other on request.Packing :- neoprene, ptfe, silicon, viton.Frame & cover :- ms, optionally ss. :- accuracy :- +- 2% f.s.d. temperature ratings: - maximum operating temperature rating is 121 o c for gas services and 93o c for liquid services.Repeatability : - 0.5 % rangebility : - 10:1 connections : - flanged or screwed or triclover joint or hose nipple. enclosure : - ip 55 or ip 65 on request.Scale length : - 220 mm.Pressure ratings :-

kabir make by- pass rotameter as designed for measurement of flow rate of liquid and gases in 2 nb or higher size pipe sine. The complete assembly consist of carrier rings [orifice flanges], orifice plate, by-pass piping with isolation valves & a rotameter as indicator. The orifice plate is design on is of bs specification.These meters are selected for low cost measurement of high flow rates generally in the 2 and larger sizes. It provides linear measurements of fluid in conjunction with an orifice plate in the main line. The rotameter is modified to include a range orifice which is sized so that the flow through the meter at the maximum pressure drops across the orifice plate in necessary to lift the float to the maximum position. Hence the flow through the range orifice is proportional to the instantaneous flow through the main orifice and so the bypass rotameter measure main line flow.Features :- easy to maintainon-line installationvery low costaccuracy : 2 % of full flow range ability : 7:1 of 5 : 1accessories : high & low flow alarm solution moc material of construction :-orifice plate : s s 316 or pvc or tefloncarrier ring : s s 316 or mild steel or p p or pvcpipe line : s s 316 or g I (m.s) or pvc or msrlwetted parts of rota meter : s s 316 or mild steel or rubber or - teflon lined steel.