Measurement Gauges & Fittings #1787844

We are offering float level gauge.kabir make float and board level indicators are used for fluid level measurements in several industries. The float that is contained within a magnetic level indicator is of course the most important element of the instrument. In fact, its structural design, volume displacement, weight, and buoyancy force are all taken into careful consideration when a float is specified for a particular application.Often a typical float and board level indicator would consist of a float, dust proof pulley housing, pointer cradle with nylon and 150 mm screen printed aluminum scale. This instrument is an absolutely reliable and accurate system for liquid level measurement in tall overhead tanks.These type of float and board level indicators basically work on the principle of buoyancy. The float is well connected to the counter weight along with a pointer through flexible wire ropes. The pointer slides along the guide against a graduated scale to indicate corresponding levels inside the tank. Most often, the floats and board level indicators find its application in over ground and over head storage tanks. They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on. Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on. In short, the float and board level indicators are most widely used in all non hazardous and non pressurized tanks.The features of a typical float and board level indicator can be detailed as follows. It has dust proof pulley housing. It comes with an ss bush bearing for a smooth rotation of pulley. The pointer cradle has 6 nylon rollers and adjustable brackets for easy mounting. It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking. The indicator of course, has a slack float with large diameter for higher accuracy. This level indicator is very easy to transport as well as insta

We are offering float & board level gauge.kabir make float & board types level gauge are used for fluid level measurement in several industries. The float which is of course the most important element of the instrument. In fact, its structural design, volume displacement, weight, and buoyancy force are all taken into careful consideration when a float is specified for a particular application.Often a typical float & board type level gauge is consist of a float, dust proof pulley housing, pointer cradle with nylon and 150 mm width screen printed aluminum scale. This instrument is an absolutely reliable and accurate system for liquid level measurement in tall overhead tanks. This type of float & board type level gauge basically work on the principle of buoyancy. The float is well connected to the counter weight along with a pointer through flexible wire ropes. The pointer slides along the guide against a graduated scale to indicate corresponding levels inside the tank. the float & board type level gauge finds its application in underground and over head storage tanks. They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on. Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on. In short, the float & board type level indicator is most widely used in all non hazardous and non pressurized tanks. For tank height more than 10 meter we provide anchor plated with anchor housing for installing the anchor rope.kabir also offers vapor seal type float & board type level gauge which is generally used for tanks having corrosive fumes vapors or n2 [nitrogen] purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed s.s. Or pvc pipe & which drives a follower magnetized bi - color capsule inside a glass tube to indicate liquid level.

We are the most preferred manufacturer and supplier of excellent quality Reflex Level Gauge from Vadodara, Gujarat. Also referred to as Transparent Type Level Gauge, this product is used for the measurement of liquid level in tanks. The Gauge comprises of carbon steel cover plate, carbon steel liquid chamber and prism glass window which utilizes the basic optical principles of light refraction & reflection for the measurement purpose. The Gauge is primarily used for high pressure or temperature storage tanks. As per the requirement of the customers, we offer these Gauges in imported/ indigenous glasses. We offer these Reflex Level Gauges at affordable prices.

 

Details : “Kabir” offers Reflex Level Gauge for the Measurement of liquid level at a glance in tank. This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks. These gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the Interior of the gauge. So that the area appears dark (Black). While the light strikes the open space, above the liquid level is reflected back to the observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems.

 In this type of level gauge the liquid level is discriminated in the form of different

 

Specifications :

•  Type  : Reflex / Transparent
•  Visibility  : Full Visibility / Partial Visibility
•  Liquid Chamber  : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 , S.S.316 (L), P.P
•  Cover Plate : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 , S.S.316 (L), P.P
•  Gasket  : CAF , PTFE , Graphoil , Non Asbestose Other On request
•  Glass  : Borosilicate Toughened of Indigenous – Temperature Range upto
•  150^oC , Klinger / Illamdur Make Imported Temperature Range Upto 350^oC, Other on request.

 

 Features :

• Designed for high pressure & temperature liquid storage tanks in petrochemicals, fertilizers, Pharmaceuticals & Chemical industries.

• In reflex level gauges, the glass has precision groves cut inner side and mainly used for colorless liquids.

• In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids.

• Max. 3000 mm length in single piece.

• Imported/indigenous glasses on request.

• Frost free arrangement on request.

We are one of the most promised manufacturers and suppliers of Float & Board Type Level Gauge located in Vadodara, Gujarat, India. The Float & Board Type Level Gauge is used to make absolutely reliable and accurate fluid level measurement. The float is specified as per the structural design, volume displacement, and weight and buoyancy force of a particular application. This model is easy to transport and install.

 

Details :

• “Kabir” Make Float & Board types Level Gauge are used for fluid level measurement in several industries. The Float which is of course the most important element of the instrument. In fact, its structural design, volume displacement, weight, and buoyancy force are all taken into careful consideration when a float is specified for a particular application.
•  Often A typical Float & Board type Level Gauge is consist of a Float, dust proof Pulley Housing, Pointer cradle with nylon and 150 mm width screen printed Aluminum Scale. This instrument is an absolutely reliable and accurate system for liquid level measurement in tall overhead tanks.
•  This type of Float & Board type Level Gauge basically work on the principle of buoyancy. The float is well connected to the counter weight along with a pointer through flexible wire ropes. The pointer slides along the guide against a graduated scale to indicate corresponding levels inside the tank. 
• Most often, the Float & Board type Level Gauge finds its application in underground and over head storage tanks. They are also used in storage tanks of petroleum products, like furnace oil, diesel, and lube oil and so on. Also, it is used in storage of vegetable oils, molasses, silicates, glucose and so on. In short, the Float & Board type Level Indicator is most widely used in all non hazardous and non pressurized tanks. For Tank height more than 10 meter we provide Anchor Plated with Anchor Housing for Installing the Anchor Rope.

• “Kabir”also offers Vapor Seal Type Float & Board type Level Gauge which is generally used for tanks having corrosive fumes / vapors OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. OR PVC pipe & which drives a follower magnetized bi - color capsule inside a glass tube to indicate liquid level.
• The features of a typical Float & Board type Level Gauge can be detailed as follows. It has dust proof pulley housing. It comes with an SS bush bearing for a smooth rotation of pulley. The pointer cradle has 6 PP rollers and adjustable brackets for easy mounting. It has a non corroding aluminum board with controlled cross section geometry and a wide painted scale with prominent multi color marking. The indicator of course, has a slack float with large diameter for higher accuracy. This level indicator is very easy to transport as well as install.
• Height up to 30 meters. Other require Longer height as per your request.

 

 Features :

•  Float : SS 316 / P.P. / SS with PTFE Coated,  
• Rope : SS 304 / SS 316 / PP / PTFE / SS with PTFE Coated,
• Pulley : Aluminum / SS 316 / PP,
• Pulley Housing : Aluminum / P.P.,
• Telescopic Pipe : MS / SS / PVC,
• Board : Aluminum / FRP / SS 316,
• Flanges : MS / SS / P.P.,
• Pointer : MS / SS / FRP Coated MS,
• Anchor Plate : SS 316,
• Anchor Housing : MS / SS 316,
• Fasteners : GI Plated / SS,
• Bracket : MS / S

kabir manufactures high performance magnetic level indicator. It is a single chamber design with 2, 2.5", or 3" chamber diameter according to the application. There are twelve basic configuration styles, including top mounted models. kabir magnetic level indicators are produced in a wide range of materials of construction, including plastics. kabir also offers one of the most complete selections of process connection types and sizes in the industry. It may be equipped with a variety of level transmitters and switches, as well as, flag & shuttle indicators with or without stainless steel scales. This enables the kabir to be a complete level and monitoring control. a change of level in the process tank corresponds to a similar change within the chamber. In response to the level movement, the float moves accordingly, actuating the bi color rotating roller or red & black capsule for visual indication. :-broad range of chamber stylesfabricated non-magnetic chambersansi and din flangesprecision manufactured floatbi color rotating roller type indicatorred & black capsule design type indicator :-feed water heatersindustrial boilersoil water separatorsflash drumssurge tanksgas chillersheight up to 6 meter in single piece designmax. Temperature up to 2500 c max. Pressure up to 15 kgcm :-level switcheslevel transmitters with 4-20 ma output, hart protocol , digital indicator in mm or liter. stainless steel scale standardcustomer scales

We are one of the topmost manufacturer and supplier of Pressure Gauge situated in Vadodara, Gujarat, India. The Pressure Gauge has a stainless case and measuring system which has welded socket available in premium series where the system can be filled with liquid or kept dry. This gauge has protection of IP 65 and IP 66. Also, the system has an accuracy of 0.5%, 1% or 1.6%.

The "KiT" make tubular Level Indicator (Side Mounted) .It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc.