Kaamdhenu Machine Tools Pvt. Ltd.

Vijay Nagar, Indore, Madhya Pradesh

The assembly of Pinch Roll Leveller can be used to guide the strips / sheets wherever required. The Pinch Roll Leveller Assembly offered by us has a different combination of pinch roll leveler with drive and non-drive options. All rollers of Pinch Roll Leveller are of high alloy steel and thermal treated to achieve higher degrees of wear / tear resistance. The Pinch Roll Leveller has a capacity up to 16mm thk X 2500mm wide. Attributes :

• Made of high alloy steel
• Low maintenance
• Used to guide the strips / sheets
• Wear and tear resistant

The Coil Slitting Machine we offer is a complete solution to slit the coil in desired width. The Coil Slitting Machine is a perfect combination of precisely machined heavy duty fabricated terminal equipment. Project on turn-key basis can be executed with the help of Coil Slitting Machine to meet the exact requirements. The Coil Slitting Machine has a capacity up to 8mm thk x 1600 wide. Attributes :

• Heavy duty
• Capacity up to 8mm thk x 1600 wide
• Low maintenance
• Available at competitive prices

We are an eminent manufacture of Pipe Hydro Testing Machine in INDIA for all kind of steel pipes and valves. Pipe Hydro Tester is pressure testing machine and is heavy in construction and very sensitive also to record any pressure drop due to any weld defect of defect of parent material. Test Pressure can be recorded in electronic media and chart recorder produce the entire testing cycle record. The manufacturing range covers the testing of pipes diameter ranging from ½â to 120â out side diameter and length 6 meter to 12.5 meter. The equipment is used to test the pipes on prescribed pressure as per the API, ISO, and IS Specification.

The Roll Forming Mill gives a fine shape and texture to the sheets passing from the machine. The Roll Forming Mill for all kind of open sections helps to cut the sheets into the desired length as per the specific requirements. The Roll Forming Mill is highly appreciated by the clients for its unique features like high potency, excellent automation, low power consumption and long service life. We are prominent Roll Forming Mill Manufacturers and Suppliers in India. Any type of continuous profile can be produces on roll forming e.g. roofing sheets, automobile roof, side penal & floor penal, road side crash guard, âCâ & âZâ Section or as asked by customer. Attributes :

• Robust construction
• Efficient functioning
• Easy to use
• Low maintenance

We are a well-known Squeeze Roll Assembly Manufacturer and Supplier in India. The Squeeze Roll Assembly offered by us is highly acclaimed for features like robust construction, low power consumption, long functional life, low maintenance and more. The squeeze roll assemblies are used in on line steel processing plants to remove and dry the sheet surface after chemical treatment like in continuous galvanizing plants pickling lines etc. The unique feature of our squeeze roll assembly is the on line replacement of top and bottom rolls , no need to stop the mill for replacement of rollers. Attributes :

• Sturdy construction
• Wear and tear resistant
• Tested under rough conditions
• Available at market leading prices

The Pipe and Tube Straightening Machine is a driven cross roll series tube straightening machine, designed to handle tubes of outer dial from 6 mm. to 170 mm. The Pipe and Tube Straightening Machine is available in different models as per the requirements of the clients. The Pipe and Tube Straightening Machine is designed on well proven rotary pressure and deflection principle of straightening, which gives very high degree of straightness less then 1.0 mm. /meter. All the rolls of Pipe and Tube Straightening Machine are made of high alloy steel and suitably thermal treated, mounted in pairs and all are driven machine range available are 6mm â 170mm Od, 0.5mm-25.0 mm thick, 3m-15m tube length. Attributes :

• Idle for tubes of outer dial from 6 mm. to 170 mm
• Gives high degree of straightness
• Made of high alloy steel
• Available at market leading prices

The Hydraulic Coil Car comes with heavy duty fabricated structure which is precisely designed. The Hydraulic Coil Car offered by us has a capacity of maximum 25 ton of coil weight and maximum 1800 wide. The Hydraulic Coil Car comes with both manual & hydraulic expand collapse type and also has option of drive and non-drive type as required. The Hydraulic Coil Car features V-saddle type to carry and lift the coil to the desired position with capacity maximum 30 tonnes x 1800 wide. Attributes :

• Low maintenance
• Capacity of maximum 25 ton of coil weight and maximum 1800 wide
• Easy to operate
• Available at competitive prices

The Pipe Forming Machine fabricated forming boom is used in for spiral pipe manufacturing mills, with lower cradle assembly. The Pipe Forming Machine offered by us comes with thermal treated high alloy steel forming roller (buttress roll) assemblies. The Pipe Forming Machine has a pipe range of 18" to 120" Od. We are a prominent Pipe Forming Machine Manufacturers and Suppliers in India. We are one of the eminent manufacturer and supplier of Spiral SAW & L-SAW Pipe mill terminal equipment . We manufacture and supply Spiral Pipe Mill boom , cradle rollers assembly , Buttress Rollers , Flux Recovery Tilters, Pipe rotators , Pipe Kick In & Kick Out System , Dibolic (Threaded feeding) Conveyor , Plate Scrubbers , TAB Joining Machine , Offline Welding Station , ID-OD Welding Wagon and many more. Attributes :

• Low maintenance
• Robust construction
• Heavy fabrication
• Comes with thermal treated high alloy

The Pipe End Bevelling Machine is a complete equipment to perform end facing & beveling of pipe end face for the pre weid preparation. The Pipe End Bevelling Machine can be designed suitably, to meet the customerâs requirement. The Pipe End Bevelling Machine offered by us features precisely machined terminal equipment manufactured with all the bought outs from reputed manufacturers across the globe. The Pipe End Bevelling Machine covers the pipe size from 8 inch to 120 inch. The Pipe End Bevelling Machine above 12" diameter pipe has a unique design of tool holder with guide roll assembly which ensures the uniformity of bevel/root face all over. Attributes :

• Easy handling
• Innovative technology
• Low maintenance
• Available at market leading prices

We offer ERW Tube Mill for stainless steel as well as mild steel tubes for making tubes in accordance to API/BS/IS standard. Our range of ERW Tube Mill covers the tube size ½â OD to 12â NB. We offer a complete plant with all testing equipment and other manufacturing terminal equipment like Tube Threading / End Facing Tube Polishing Machines etc.

Automatic I-Beam Welding line to fabricate heavy duty Bridge girders and PEB shed beams and column. WEB thickness ranging from 10mm to 50mm Flange thickness 15mm to 80 mm. Maximum weight 2.5 ton per meter. All operation mechanised / hydraulic operated. PLC controlled equipment.

We are a one-stop destination and the perfect place for purchasing excellence assured Steel Tube Mill. Our product range is subjected to stringent quality control procedures to ensure they are as per industry standards.

With our brilliant logistics network, we can furnish urgent and massive requirements of the buyers with ease. We are actively engaged in supplying exemplary range of products from our ultramodern warehousing facility in Indore(India).

Purchasers will not be disappointed buying our range of product, as it adheres to industrial quality regulation systems. The finest array of products we deliver is manufactured using only exceptional quality inputs (raw material). We make certain that the material (inputs) used are of high grade.

Our basic materials, which are used for the production of our finished goods, are cross examined over diverse aspects in order to ensure its excellent quality. The checking is done by our experts. We settle the financial transactions with our customers through the secured payment procedures. We also settle down upon a variety of negotiable instruments.

We are assisted by a team of professional quality experts who check our products at different stages such as production, packaging and delivery. Courtesy a wide distribution network, our company is capable of catering to buyers IN Indore(India) and/or anywhere.

Our payment procedure can be both physical and electronic. Physical modes can be cash payment, bank deposits and others. On the other hand, our electronic modes include instant payment gateway. Reckoned for our excellent customer care support, we have become preeminent suppliers of steel coil slitting machine in the industry.

We manufacture and supply "U" Channel roll forming machine from 2.5mm Thick to 4.00 mm thick sheet. With reasonable pricing and qulity.