• MaterialGalvanised Steel
• Brand NameK2
• ColorGrey
• ApplicationElectrical Industry
• Ohmic Tolerance+_5%
• Mounting TypeFloor Mounted
• Dielecric Strength2.0 KV A.C For 1 Min.
• Insulation Resistance>2MOHM@ 500VD.C
• Ingress ProtectionIP 20
• Cooling TypeNatural Air Cooled
• Overload Withstanding10x Power For 5 Sec
• Cable Entry SideBottom
• Grid TypePunched Stainless Steel
• Power Ratings0.75 KW
• Duty Cycle100%

• Brand NameK2
• MaterialAluminium
• ShapeRectangle
• ColorSilver
• UsageElectrical Industry
• Ohmic Tolerance+-5%
• Temperature Coefficient150 ppm/ DegreeC
• Dielectric Strength2.0 KV A.C For 1 Min
• Insulation Resistance2Mohm @500V D.C
• Country of OriginMade in India
• Overload Withstanding10x Power For 5 Sec
• Power sourceElectricity
• Power Rating100 W
• Duty Cycle50%
• Ohmic Values1 to 10K OHM

• FeaturesHigh Power to Size Ratio, High Temperature Resisting Hard Anodising Aluminium Housing.
• 25 Watts to 50 Watts0.1Ω to 10KΩ
• Standard ±5%. Closer Tolerances Available.±50ppm/°C to ±200ppm/°C
• 2000V a.c. for 1 Minute>2000MΩ at 500V a.c.

a prominent name in the industry in manufacturing and supplying BATTERY DISCHARGE LOAD BANKS. Generally BATTERY DISCHARGE LOAD BANKS are available in two types. One is DCM type BATTERY DISCHARGE LOAD BANKS in which load bank in manually controlled by switches. Other type is DCC in which load bank is controlled by constant current. A digital display control processor is used in this process. It is a mobile unit available at different Amp. Capacities

• Power Ratings120 Watts to 2500 Watts in single tube.
• Current Range0.3A to 40A

• Brand NameK2
• MaterialAluminium
• ShapeRectangle
• ColorSilver
• UsageElectrical Industry
• Temperature Coefficient150 ppm/ DegreeC
• Dielectric Strength2.0 KV A.C For 1 Min
• Insulation Resistance2Mohm @500V D.C
• Country of OriginMade in India
• Overload Withstanding10x Power For 5 Sec
• Power sourceElectricity
• Power Rating100 W
• Duty Cycle50%
• Ohmic Values1 to 10K OHM
• Ohmic Tolerance+-5%

• MaterialGalvanised Steel
• Brand NameK2
• ColorGrey
• ApplicationElectrical Industry
• Mounting TypeFloor Mounted
• Dielecric Strength2.0 KV A.C For 1 Min.
• Insulation Resistance>2MOHM@ 500VD.C
• Ingress ProtectionIP 20
• Cooling TypeNatural Air Cooled
• Overload Withstanding10x Power For 5 Sec
• Cable Entry SideBottom
• Grid TypePunched Stainless Steel
• Power Ratings0.75 KW
• Duty Cycle100%
• Ohmic Tolerance+_5%

• Power Ratings120 Watts to 2500 Watts in single tube.
• Current Range0.3A to 40A

a prominent name in the industry in manufacturing and supplying BATTERY DISCHARGE LOAD BANKS. Generally BATTERY DISCHARGE LOAD BANKS are available in two types. One is DCM type BATTERY DISCHARGE LOAD BANKS in which load bank in manually controlled by switches. Other type is DCC in which load bank is controlled by constant current. A digital display control processor is used in this process. It is a mobile unit available at different Amp. Capacities

• FeaturesHigh Power to Size Ratio, High Temperature Resisting Hard Anodising Aluminium Housing.
• 25 Watts to 50 Watts0.1Ω to 10KΩ
• Standard ±5%. Closer Tolerances Available.±50ppm/°C to ±200ppm/°C
• 2000V a.c. for 1 Minute>2000MΩ at 500V a.c.