The Atmel ATmega168A, offered by us, is a 16K 8-bit microcontroller based on the AVR architecture and replaces the now obsolete ATmega168. Many instructions are executed in a single clock cycle providing a throughput of almost 20 MIPS at 20MHz. The Atmel Microcontroller comes in a PDIP 28 pin package and is suitable for use on our 28 pin AVR Development Board.

Features include :

• High performance & low power design
• 8-Bit Microcontroller Atmel® AVR® advanced RISC architecture
• 131 Instructions most of which are executed in a single clock cycle
• Up to 20 MIPS throughput at 20 MHz
• 32 x 8 working registers
• 2 cycle multiplier

Memory Includes :

• 16KB of programmable FLASH
• 512 Bytes of EEPROM
• 1KB SRAM
• 10, 000 Write and Erase Cycles for Flash and 100, 000 for EEPROM
• Data retention for 20 years at 85^oC and 100 years at 25^oC
• Optional boot loader with lock bits
• In System Programming (ISP) by via boot loader
• True Read-While-Write operation
• Programming lock available for software security

Analog Microcontroller, offered by us, has built one of the longest standing, highest growth companies within the technology sector by building on the cultural pillars of innovation, performance, and excellence. Acknowledged industry-wide as the world leader in data conversion and signal conditioning technology our Analog Microcontroller serves over 60, 000 customers; representing virtually all types of electronic equipment. Analog Devices is headquartered in Norwood, Massachusetts, with design and manufacturing facilities throughout the world. Analog Devices is included in the S&P 500 Index.

Te NXP Microcontroller, offered by us, brings high efficiency to 12V MR16 Lamps with Dimmable LED Controller. NXP MIcrocontroller N.V. (NASDAQ: NXPI) today unveiled the SSL3401“a dimmable single-stage controller IC for retrofit MR16 LED lamps using 12V AC mains. The SSL3401 offers compatibility with an exceptionally wide range of dimmers and transformers “working with over 80% of the most common combinations “in a compact form factor that fits in all common available MR16 GU5.3 and AR111 housings and sockets. Supporting an ambient temperature range up to 105ºC, the SSL3401 also provides temperature rollback protection. Based on NXP Green Chip technology, the SSL3401 generates a stable and accurate current while dimming down to below 5% of maximum light output in most common practical situations. While maximum lamp power depends on the thermal design of the lamp, a typical 7W MR16 LED lamp using the SSL3401 achieves THD below 15%, power factor above 0.9, efficiency up to 78% and LED ripple current below ±10%.

 Energy-conscious consumers and businesses worldwide are keen to replace halogen lamps with LEDs “but making the switch to dimmable MR16 LEDs is not always as straightforward as one would expect. With the SSL3401, we’ve designed a compact single-stage controller IC specifically for dimmable MR16 LED lamps, and tested it extensively for compatibility with a wide range of dimmers and transformers, said Ryan Zahn, general manager, lighting solutions product line, NXP Semiconductors. By helping retrofit lamp manufacturers to reduce costs, we also hope to ease the transition from halogen to LED on a broader scale, particularly as 12V MR16 lamps emerge as a popular choice in both commercial and residential lighting.

We are engaged in offering 1 Pc PIC16F877A-I/P DIP-40 PIC16F877A Microchip Microcontroller IC to the customers. The Microchip Microcontroller, we offer, features an operating temperature ranging from -40^oC +85^oC.

Features :

• Category : integrated circuits (IC)
• Family : embedded microcontrollers
• Series : PIC 16F
• Core processor : PIC
• Core Size : 8 - bit
• Speed : 20MHz
• Connectivity : I2C, SPI, UART / USART
• Peripherals : brown-out Detect / Reset, POR, PWM, WDT
• Input / Output : 33
• Program memory capacity : 14KB (8K x 14)
• Program memory type : FLASH
• EEPROM : 256 x 8
• RAM : 368 x 8
• Voltage - Supply (Vcc / Vdd) : 4V 5.5V
• Data Converters : A / D 8 x 10b
• Oscillator type : external
• Operating temperature : -40^oC +85^oC
• Encapsulation : 40-DIP

We offer Allegro Microcontroller to the customers at market leading prices. The A3930 and A3931 are 3-phase brushless dc (BLDC) motor controllers for use with N-channel external power MOSFETs. Our Allegro Microcontroller incorporates much of the circuitry required to design a cost effective three-phase motor drive system, and has been specifically designed for automotive applications.

A key automotive requirement is functionality over a wide input supply range. A unique charge pump regulator provides adequate (>10 V) gate drive for battery voltages down to 7 V, and allows the device to operate with a reduced gate drive at battery voltages down to 5.5 V. Power dissipation in the charge pump is minimized by switching from a voltage doubling mode at low supply voltage to a dropout mode at the nominal running voltage of 14 V.

A bootstrap capacitor is used to provide the above-battery supply voltage required for N-channel MOSFETs. An internal charge pump for the high-side drive allows for dc (100% duty cycle) operation.

We present high quality Dallas Microcontroller to our customers. We are offering Dallas Semiconductor announced the introduction of microcontrollers that can directly serve up web pages. TINI™ (Tiny InterNet Interface) is a microcontroller-based development platform that executes code for embedded web servers. Our Dallas Microcontroller can have preferences and settings adjusted from afar, just by having its administrator browse a web page hosted by the microcontroller-no other computers required.

The STMicroelectronics STM8L Microcontroller (MCU) uses a new proprietary ultra-low leakage process and optimized architecture to provide high performance and ultra-low power consumption. The STMicroelectronics STM8L MCU, which includes the STM8L101xx and STM8L15xx, is based on the 8-bit STM8 core and is ideal for many applications with special care on power savings. The STM Microcontroller, we offer, embeds up to 4 different ultra-low-power modes to offer users a high level of flexibility. This STM Microcontroller 8-bit MCU offers a high level of integration and a compact footprint. The STM8L-DISCOVERY Board is ideal for evaluating these high performance MCUs.

The Texas Microcontroller, offered by us, supports Controller, Regulator, DSP, MCU (MSP Series), Logics & other parts. Our Texas Microcontroller is widely used for low powered implanted devices. The Texas Microcontroller uses six different low-power modes. Avail the Texas Microcontroller from us at highly competitive prices.

We are offering Fairchild MIcrocontroller to the customers. Fairchild's high-voltage process and common-mode noise canceling technique provides stable operation of the high-side driver under high dv/dt noise circumstances. An advanced level shift circuit allows high-side gate driver operation up to VS = -9.8 V (typ.) for VBS = 15V. The input logic level of our Fairchild Microcontroller is compatible with standard TTL-series logic gates. UVLO circuits for both channels prevent malfunction when VCC and VBS are lower than the specified threshold voltage. Output drivers typically source/sink 350mA/650mA, respectively, which is suitable for fluorescent lamp ballasts, PDP scan drivers, motor controls, etc.

We are engaged in offering Intersil MIcrocontroller to the customers. Intersil ISL95833 Pulse Width Modulation (PWM) controller IC provides a complete solution for IMVP-7/VR12™ compliant microprocessor and graphic processor core power supplies. Intersil MIcrocontroller ISL95833 provides the control and protection for two Voltage Regulators (VRs). The first VR, typically for VCORE, incorporates 1 integrated driver and can operate in 2- or 1-phase configurations. The second VR, typically for Graphics, is a single phase regulator incorporating an integrated driver. The two VRs share a serial control bus to communicate with the CPU and achieve lower cost and smaller board area compared with the two-chip approach. Both VRs utilize Intersil's Robust Ripple Regulator R3 Technology™. The R3 modulator has numerous advantages compared to traditional modulators, including faster transient response, variable switching frequency during load transients, and improved light load efficiency due to its ability to automatically change switching frequency. The ISL95833 has several other key features. Both outputs support either DCR current sensing with a single NTC thermistor for DCR temperature compensation, or more precise resistor current sensing if desired. Both outputs come with remote voltage sense, programmable VBOOT voltage, IMAX, and switching frequency, adjustable overcurrent protection and separate Power-Good signals.

Features :

• Serial Data Bus
• Dual Outputs
• Configurable 2- or 1-phase for the 1st Output using
• One Integrated Gate Driver
• 1-phase for the 2nd Output using an Integrated Gate Driver
• R3 Modulator
• Excellent Transient Response
• High Light Load Efficiency
• 0.5% System Accuracy Over-Temperature
• Supports Multiple Current Sensing Methods
• Lossless Inductor DCR Current Sensing
• Precision Resistor Current Sensing
• Differential Remote Voltage Sensing
• Programmable VBOOT Voltage at Start-up
• Resistor Programmable IMAX, Switching Frequency for Both Outputs
• Adaptive Body Diode Conduction Time Reduction

Infineon Technologies' XMC4500 series of 32-bit Industrial ARM® Cortex™-M4 MCUs mark a cornerstone in microcontroller design for real-time critical systems. It is the result of Infineon's world-leading microcontroller know-how now coupled with the benefits of a standard CPU core (ARM® Cortex™-M4). Featuring Infineon's power peripheral set, configurable to specific application requirements, the XMC4500 Infineon Microcontroller is the ultimate choice for today's industrial control solutions. This family is designed to tackle the imminent challenges of improving energy efficiency, supporting advanced communications protocols and reducing time-to-market. Striving for energy-efficiency, Infineon Microcontroller greatly benefits from Infineon's well-known set of configurable peripherals, fast embedded Flash technology, high quality standards, long product life times, and the ability to provide high temperature ranges of up to 125ºC, backed by Infineon's background as a leading supplier to automotive markets.

Freescale's Kinetis E Microcontroller series is the most scalable portfolio of ARM® Cortex®-M0+ MCUs in the industry. Designed to maintain high robustness for complex electrical noise environments and high-reliability applications, the Freescale Kinetis E MIcrocontroller offers a broad range of memory, peripheral and package options. Freescale Kinetis E MIcrocontroller shares common peripherals and pin counts allowing developers to migrate easily within an MCU family or between MCU families to take advantage of more memory or feature integration. This scalability allows developers to standardize on the Kinetis E series for their end product platforms, maximizing hardware and software reuse and reducing time-to-market.

Embedded Processors & Embedded Controllers are available with us. Mouser is an authorized distributor for many embedded processor & embedded controller manufacturers including Altera, Analog Devices, Atmel, Cypress, Freescale, Maxim Integrated, Microchip, NXP, Silicon Labs, STMicroelectronics, Texas Instruments, ZiLOG & many more. Avail the Everlight Microcontroller from us at market leading prices.

The Atmel ATmega168A, offered by us, is a 16K 8-bit microcontroller based on the AVR architecture and replaces the now obsolete ATmega168. Many instructions are executed in a single clock cycle providing a throughput of almost 20 MIPS at 20MHz. The Atmel Microcontroller comes in a PDIP 28 pin package and is suitable for use on our 28 pin AVR Development Board.

Features include :

• High performance & low power design
• 8-Bit Microcontroller Atmel® AVR® advanced RISC architecture
• 131 Instructions most of which are executed in a single clock cycle
• Up to 20 MIPS throughput at 20 MHz
• 32 x 8 working registers
• 2 cycle multiplier

Memory Includes :

• 16KB of programmable FLASH
• 512 Bytes of EEPROM
• 1KB SRAM
• 10, 000 Write and Erase Cycles for Flash and 100, 000 for EEPROM
• Data retention for 20 years at 85^oC and 100 years at 25^oC
• Optional boot loader with lock bits
• In System Programming (ISP) by via boot loader
• True Read-While-Write operation
• Programming lock available for software security

Analog Microcontroller, offered by us, has built one of the longest standing, highest growth companies within the technology sector by building on the cultural pillars of innovation, performance, and excellence. Acknowledged industry-wide as the world leader in data conversion and signal conditioning technology our Analog Microcontroller serves over 60, 000 customers; representing virtually all types of electronic equipment. Analog Devices is headquartered in Norwood, Massachusetts, with design and manufacturing facilities throughout the world. Analog Devices is included in the S&P 500 Index.

Te NXP Microcontroller, offered by us, brings high efficiency to 12V MR16 Lamps with Dimmable LED Controller. NXP MIcrocontroller N.V. (NASDAQ: NXPI) today unveiled the SSL3401“a dimmable single-stage controller IC for retrofit MR16 LED lamps using 12V AC mains. The SSL3401 offers compatibility with an exceptionally wide range of dimmers and transformers “working with over 80% of the most common combinations “in a compact form factor that fits in all common available MR16 GU5.3 and AR111 housings and sockets. Supporting an ambient temperature range up to 105ºC, the SSL3401 also provides temperature rollback protection. Based on NXP Green Chip technology, the SSL3401 generates a stable and accurate current while dimming down to below 5% of maximum light output in most common practical situations. While maximum lamp power depends on the thermal design of the lamp, a typical 7W MR16 LED lamp using the SSL3401 achieves THD below 15%, power factor above 0.9, efficiency up to 78% and LED ripple current below ±10%.

 Energy-conscious consumers and businesses worldwide are keen to replace halogen lamps with LEDs “but making the switch to dimmable MR16 LEDs is not always as straightforward as one would expect. With the SSL3401, we’ve designed a compact single-stage controller IC specifically for dimmable MR16 LED lamps, and tested it extensively for compatibility with a wide range of dimmers and transformers, said Ryan Zahn, general manager, lighting solutions product line, NXP Semiconductors. By helping retrofit lamp manufacturers to reduce costs, we also hope to ease the transition from halogen to LED on a broader scale, particularly as 12V MR16 lamps emerge as a popular choice in both commercial and residential lighting.

We are engaged in offering 1 Pc PIC16F877A-I/P DIP-40 PIC16F877A Microchip Microcontroller IC to the customers. The Microchip Microcontroller, we offer, features an operating temperature ranging from -40^oC +85^oC.

Features :

• Category : integrated circuits (IC)
• Family : embedded microcontrollers
• Series : PIC 16F
• Core processor : PIC
• Core Size : 8 - bit
• Speed : 20MHz
• Connectivity : I2C, SPI, UART / USART
• Peripherals : brown-out Detect / Reset, POR, PWM, WDT
• Input / Output : 33
• Program memory capacity : 14KB (8K x 14)
• Program memory type : FLASH
• EEPROM : 256 x 8
• RAM : 368 x 8
• Voltage - Supply (Vcc / Vdd) : 4V 5.5V
• Data Converters : A / D 8 x 10b
• Oscillator type : external
• Operating temperature : -40^oC +85^oC
• Encapsulation : 40-DIP

We offer Allegro Microcontroller to the customers at market leading prices. The A3930 and A3931 are 3-phase brushless dc (BLDC) motor controllers for use with N-channel external power MOSFETs. Our Allegro Microcontroller incorporates much of the circuitry required to design a cost effective three-phase motor drive system, and has been specifically designed for automotive applications.

A key automotive requirement is functionality over a wide input supply range. A unique charge pump regulator provides adequate (>10 V) gate drive for battery voltages down to 7 V, and allows the device to operate with a reduced gate drive at battery voltages down to 5.5 V. Power dissipation in the charge pump is minimized by switching from a voltage doubling mode at low supply voltage to a dropout mode at the nominal running voltage of 14 V.

A bootstrap capacitor is used to provide the above-battery supply voltage required for N-channel MOSFETs. An internal charge pump for the high-side drive allows for dc (100% duty cycle) operation.

We present high quality Dallas Microcontroller to our customers. We are offering Dallas Semiconductor announced the introduction of microcontrollers that can directly serve up web pages. TINI™ (Tiny InterNet Interface) is a microcontroller-based development platform that executes code for embedded web servers. Our Dallas Microcontroller can have preferences and settings adjusted from afar, just by having its administrator browse a web page hosted by the microcontroller-no other computers required.

The STMicroelectronics STM8L Microcontroller (MCU) uses a new proprietary ultra-low leakage process and optimized architecture to provide high performance and ultra-low power consumption. The STMicroelectronics STM8L MCU, which includes the STM8L101xx and STM8L15xx, is based on the 8-bit STM8 core and is ideal for many applications with special care on power savings. The STM Microcontroller, we offer, embeds up to 4 different ultra-low-power modes to offer users a high level of flexibility. This STM Microcontroller 8-bit MCU offers a high level of integration and a compact footprint. The STM8L-DISCOVERY Board is ideal for evaluating these high performance MCUs.

The Texas Microcontroller, offered by us, supports Controller, Regulator, DSP, MCU (MSP Series), Logics & other parts. Our Texas Microcontroller is widely used for low powered implanted devices. The Texas Microcontroller uses six different low-power modes. Avail the Texas Microcontroller from us at highly competitive prices.

We are offering Fairchild MIcrocontroller to the customers. Fairchild's high-voltage process and common-mode noise canceling technique provides stable operation of the high-side driver under high dv/dt noise circumstances. An advanced level shift circuit allows high-side gate driver operation up to VS = -9.8 V (typ.) for VBS = 15V. The input logic level of our Fairchild Microcontroller is compatible with standard TTL-series logic gates. UVLO circuits for both channels prevent malfunction when VCC and VBS are lower than the specified threshold voltage. Output drivers typically source/sink 350mA/650mA, respectively, which is suitable for fluorescent lamp ballasts, PDP scan drivers, motor controls, etc.

We are engaged in offering Intersil MIcrocontroller to the customers. Intersil ISL95833 Pulse Width Modulation (PWM) controller IC provides a complete solution for IMVP-7/VR12™ compliant microprocessor and graphic processor core power supplies. Intersil MIcrocontroller ISL95833 provides the control and protection for two Voltage Regulators (VRs). The first VR, typically for VCORE, incorporates 1 integrated driver and can operate in 2- or 1-phase configurations. The second VR, typically for Graphics, is a single phase regulator incorporating an integrated driver. The two VRs share a serial control bus to communicate with the CPU and achieve lower cost and smaller board area compared with the two-chip approach. Both VRs utilize Intersil's Robust Ripple Regulator R3 Technology™. The R3 modulator has numerous advantages compared to traditional modulators, including faster transient response, variable switching frequency during load transients, and improved light load efficiency due to its ability to automatically change switching frequency. The ISL95833 has several other key features. Both outputs support either DCR current sensing with a single NTC thermistor for DCR temperature compensation, or more precise resistor current sensing if desired. Both outputs come with remote voltage sense, programmable VBOOT voltage, IMAX, and switching frequency, adjustable overcurrent protection and separate Power-Good signals.

Features :

• Serial Data Bus
• Dual Outputs
• Configurable 2- or 1-phase for the 1st Output using
• One Integrated Gate Driver
• 1-phase for the 2nd Output using an Integrated Gate Driver
• R3 Modulator
• Excellent Transient Response
• High Light Load Efficiency
• 0.5% System Accuracy Over-Temperature
• Supports Multiple Current Sensing Methods
• Lossless Inductor DCR Current Sensing
• Precision Resistor Current Sensing
• Differential Remote Voltage Sensing
• Programmable VBOOT Voltage at Start-up
• Resistor Programmable IMAX, Switching Frequency for Both Outputs
• Adaptive Body Diode Conduction Time Reduction

Infineon Technologies' XMC4500 series of 32-bit Industrial ARM® Cortex™-M4 MCUs mark a cornerstone in microcontroller design for real-time critical systems. It is the result of Infineon's world-leading microcontroller know-how now coupled with the benefits of a standard CPU core (ARM® Cortex™-M4). Featuring Infineon's power peripheral set, configurable to specific application requirements, the XMC4500 Infineon Microcontroller is the ultimate choice for today's industrial control solutions. This family is designed to tackle the imminent challenges of improving energy efficiency, supporting advanced communications protocols and reducing time-to-market. Striving for energy-efficiency, Infineon Microcontroller greatly benefits from Infineon's well-known set of configurable peripherals, fast embedded Flash technology, high quality standards, long product life times, and the ability to provide high temperature ranges of up to 125ºC, backed by Infineon's background as a leading supplier to automotive markets.

Freescale's Kinetis E Microcontroller series is the most scalable portfolio of ARM® Cortex®-M0+ MCUs in the industry. Designed to maintain high robustness for complex electrical noise environments and high-reliability applications, the Freescale Kinetis E MIcrocontroller offers a broad range of memory, peripheral and package options. Freescale Kinetis E MIcrocontroller shares common peripherals and pin counts allowing developers to migrate easily within an MCU family or between MCU families to take advantage of more memory or feature integration. This scalability allows developers to standardize on the Kinetis E series for their end product platforms, maximizing hardware and software reuse and reducing time-to-market.

Embedded Processors & Embedded Controllers are available with us. Mouser is an authorized distributor for many embedded processor & embedded controller manufacturers including Altera, Analog Devices, Atmel, Cypress, Freescale, Maxim Integrated, Microchip, NXP, Silicon Labs, STMicroelectronics, Texas Instruments, ZiLOG & many more. Avail the Everlight Microcontroller from us at market leading prices.