K. M. Steel India

Khetwadi, Mumbai, Maharashtra

Common Trade Names :
Incoloy 800H, Ferrochronin 800, Nickelvac 800, Nicrofer 3220

Incoloy 800 is a combination of nickel and chromium alloy that has excellent tensile strength and resistance to oxidation as well as carburzation properties. This alloy is extremely functional as it maintains a stable structure, even when exposed to high temperature. The Inconel is extremely resistant to corrosion, even in acidic environment.

This inconel 800, alloy 800 and incoloy 800 can be availed in many forms like wire , Round bar, Forged bar , hex bar , Flat bar , Circles , Ring , Tube , seamless Pipe , Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners , Socket weld Fittings , ferrule fittings , Buttweld fittings Like cap , elbow , tee.

Specification

Standards -ASTM B443 / ASTM B168 / ASTM B127

Alloy 800 is a widely used material of construction for equipment that must resist corrosion, have high strength or resist oxidation and other harmful effects of high-temperature exposure.

Inconel Alloy 800 /UNS N08800 is used for process piping, heat exchangers, heating-element sheathing, carburizing equipment, and nuclear steam-generator tubing. UNS N08800 is available in various forms like Inconel 800 wire , Inconel 800 Round bar, Inconel 800 Forged bar , Inconel 800 hex bar , Inconel 800 Flat bar , Inconel 800 Circles , Inconel 800 Ring , Inconel 800 Tube , Inconel 800 seamless Pipe , Inconel 800 Welded / ERW Pipe , Inconel 800 Sheet , Inconel 800 Plate , Inconel 800 Coil , Inconel 800 Flanges , Inconel 800 fasteners , Inconel 800 Socket weld Fittings , Inconel 800 ferrule fittings , Inconel 800 Buttweld fittings Like cap , elbow , tee , Reducer.

UNS N08800is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube at industrial rate.

Chemical Analysis of ALLOY 800 UNS (N08800)
Common Names: Incoloy 800H, Ferrochronin 800, Nickelvac 800, Nicrofer 3220

We are one of the most trusted manufacturer and supplier of nickel and copper alloy plates. These sheets are characterized by high durability, resistance to corrosion, flawless finish and complete reliability in service. Our complete range is stringently tested by our well equipped testing unit, to ensure their compliance with international quality norms. Our range of plates is offered in different technical specifications.

Our goal is to fulfill the highest expectations of our customers for delivery and product quality of Stainless Steel Capillary Pipes Tubes. Information for those interested in buyingStainless Steel Capillary Pipes Tubes. the most trusted source of Stainless Steel Capillary Pipes Tubes, More aboutK.M Steel Indiafor all Pipes & Tubes.

K.M Steel India is one of the major Indian manufacturers, exporter & suppliers ofStainless Steel Capillary Pipes Tubes &OCTG, CRA (Corrosion-Resistant Alloy) Seamless Tubes, Stainless Steel , Super Duplex , Duplex , Welded & Semaless, Carbon Steel Seamless Pipes, Tubes, Capillary Pipes & U Tubesfor applications in oil & gas, LNG, Thermal & Nuclear Power Plants, Chemical Industries, Fertilizers Plants, (petro) chemical, shipbuilding, desalination, water treatment, energy industries, EPC and Pipes for General Engineering Purpose.

K.M Steel Indiaoperates according to an certified quality programme. A complete range of testing facilities on-site contributes to consistent quality control.

The range includes:
Copper Capillary Tubes available sizes and dimension1.5mm to 3 mm OD in thickness ranging from 0.3mm to 0.6mm

Packaging & Shipping

Utmost care is taken towards Packing of the Stainless Steel Capillary Pipes Tubes so as to ensure that the resultant Coils, Foils, Tubes, Pipes and Fittings reach in the same condition as desired by our valued customers.Packing specifications for various products are:

• Larger Dia Fusion Welded Pipes are packed with aluminium end caps in a wooden crates.
• S.S. Automotive Exhaust Pipes & Scheduled pipes both are packed with plastic end caps in wooden crates.
• Cold Drawn Seamless Stainless Tubes are packed with plastic end caps in a wooden box with an inside thermocoal covering.
• Coils and Foils are packed in wooden crates.

Alloy 200 nickel pipe is made from commercially pure wrought nickel, with good mechanical properties, excellent resistance to many corrosives.

Typical applications include a variety of processing equipment, particularly to maintain product purity in handling foods, synthetic fibers, and alkalies.

Specifications:ASTM B 161, ASME SB161

Nickel 200 and Nickel 201 are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. Nickel 201 was a modification of 200 to control carbon (.02 max) which keeps it from being embrittled by intergranular precipitates at temperatures of 600 F to 1400 F in many processes. Typically, the elemental restrictions of both, nickel 200 and nickel 201, are combined into one, dual-certified chemistry resulting in a single alloy with the desired characteristics of both alloys, Nickel 200/201.

In what forms is Nickel 200/201 available at K.M Steel?

• Sheet
• Plate
• Bar
• Pipe & Tube (welded & seamless)
• Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
• Wire

What are the characteristics of Nickel 200/201?

• Highly resistant to various reducing chemicals
• Excellent resistance to caustic alkalies
• High electrical conductivity
• Excellent corrosion resistance to distilled and natural waters
• Resistance to neutral and alkaline salt solutions
• Excellent resistance to dry fluorine
• Widely used to handle caustic soda
• Good thermal, electrical and magnetostrictive properties
• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations

Both Nickel 200 and 201 offer corrosion resistance in reducing and neutral media as well as in oxidizing atmospheres provided that the oxidizing media allows the formation of a passive oxide film. This oxide film accounts for the materials excellent resistance in caustic environments. Corrosion rates in both marine and rural atmospheres are very low. The resistance of Nickel 200/201 to corrosion by distilled and natural waters is excellent. Plus it also gives excellent service in flowing sea water even at high velocity, but in stagnant or very low-velocity sea water severe local attack may occur under fouling organisms or other deposits. In hot water systems where the steam contains carbon dioxide and air in certain proportions, corrosion rates will be initially high but will decrease with time if conditions favor the formation of a protective film.

Nickel 200 is normally limited to service at temperatures below 600 F. At higher temperatures Nickel 200 products can suffer from graphitization which can result in severely compromised properties. When operating temperatures are expected to exceed 600 F, carbon content becomes critical. The lower carbon content of Nickel 201 makes the material resistant to graphitization and therefore less subject to embrittlement. Nickel 200 & 201 are approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Nickel 200 is approved for service up to 600 F while Nickel 201 is approved for service up to 1230 F. Melting point is 2615-2635 F.

• 304 Stainless Steel Seamless Pipes & Tubes
• 304L Stainless Steel Seamless Pipes & Tubes
• 304H Stainless Steel Seamless Pipes & Tubes

UNS 32750 Duplex Stainless Steel Specification

Importer, Stockholder, Supplier and Exporter's of UNS 32750 Duplex Stainless Steel Pipes & Tubes in India

DUPLEX 2205

ASTM A 182, A 240, A 276, A 789, A 790, A 815UNS S31803, S32205NACE MR0175Forms of Duplex 2205 Available at K.M STeel India

SheetPlateBarPipe & Tube (welded & seamless)Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)Welding Wire and Welding ElectrodeStainless Steel 22052205 Duplex Overview

Duplex 2205 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. Duplex describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. Often referred to as the work horse grade, 2205 is the most widely used grade in the duplex family of stainless steels.

The advantage of a duplex structure is that it combines the favorable qualities of a ferritic alloy (stress corrosion cracking resistance and high strength) with those of an austenitic alloy (ease of fabrication and corrosion resistance).

Usage of 2205 Duplex stainless steel should be limited to temperatures below 600 F. Extended elevated temperature exposure can embrittle 2205 stainless.

Corrosion Resistance

2205 duplex stainless steel is a cost effective solution for many applications where the 300 series stainless steels are susceptible to chloride stress corrosion cracking. Stress corrosion cracking occurs when stainless steels are subjected to tensile stress, while in contact with solutions containing chlorides. Increasing temperatures also increase the susceptibility of stainless steels to stress corrosion cracking.

Benefits of UNS32750 Super Duplex Stainless Steel

• Improved corrosion resistance in comparison to Duplex
• Greater tensile and yield strength
• Good ductility and toughness
• Good stress corrosion cracking resistance (SSC)
• Opportunity for purchases to reduce their material costs without compromising on quality

Crevice CorrosionThe presence of crevices, almost unavoidable in practical constructions and operations, makes stainless steels more susceptable to corrosion in chloride enviroments. 2507 is highly resistant to crevice corrosion. The critical crevice corrosion temperatures of 2507 and several other high-performance stainless steels are shown above.

We offer a range of over 8000 different items in both Grade 304 and Grade 316 in sizes from M1.6 up to M48, most of which are available off the shelf in our India warehouse and are supplied to a wide range of industries including shipbuilding, marine, mining, transport and manufacturing.

316 Grade Flat Head Stainless Steel Screws316 Stainless Steel Cement Board Screws316 Stainless Steel Self Tapping Hex Head Screws316 Stainless Trim Head Screws

Km Steel India Corporation started off producing Stainless Steel bolting in its formative years, and although the company has since diversified into more exotic materials, we continue to offer Stainless Steels and they continue to be an important part of our business, especially if customers require non-standard bolting: i.e. non-standard sizes, special specification, or otherwise difficult to find. We offer all grades of stainless steels, be it Austenitic, Ferritic or Martensitic.

Km Steel India Corporation manufactures other super alloys and special materials upon request. For example we have gained vast experience producing bolts, 316/316L 904L bolts, Washer Nuts Screws

Full Range of Special Fastener Products both Imperial & Metric. Dimensions range from M3 to M72 and quantities from 1 to 10, 000.

rail stainless steel bolts nuts washersFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Production Capacity: 500 Ton/Tons per MonthTags: Stainless Steel Bolts Nuts Washers Rail Stainless Steel Bolts Nuts Washers Bolts Nuts Washers

stainless steel bolts nuts washersFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Production Capacity: 500 Ton/Tons per MonthTags: Stainless Steel Bolts Nuts Washers Stainless Steel Hex Nut Stainless Steel Nut

Stainless Steel Hex bolts nuts washersFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Production Capacity: 500 Ton/Tons per MonthTags: Stainless Steel Bolts Nuts Washers Bolt Nut Washer Stainless Steel Bolt And Nut

Stainless Steel Bolts Nuts WashersFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Production Capacity: 500 Ton/Tons per MonthTags: Stainless Steel Bolts Nuts Washers

stainless steel hex head bolts nuts washersFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Production Capacity: 500 Ton/Tons per MonthTags: Hex Bolts Nuts Washers Hexagon Bolt Nut And Washer Stainless Steel Hex Bolt Nuts Washers

Stainless Steel Bolts Nuts WashersProduction Capacity: 500 Ton/Tons per MonthFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)

304L stainless steel bolts nuts washers 304 M20*120Production Capacity: 500 Ton/Tons per MonthFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Tags: Bolt Nut304 Hexagon Bolt Nut And Washer Bolts Nuts And Washer

stainless steel bolts nuts washersProduction Capacity: 500 Ton/Tons per MonthFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Tags: Stainless Steel Bolts Nuts Washers Stainless Steel Bolt And Nut 316l Stainless Steel Bolts

stainless steel bolts nuts washersFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Production Capacity: 500 Ton/Tons per MonthTags: Bolts Nuts Washers Stainless Steel Bolt Bolts

stainless steel bolts nuts washersProduction Capacity: 500 Ton/Tons per MonthFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Tags: Stainless Steel Bolts Nuts Washers Stainless Steel Bolts Nuts Washers Stainless Steel Bolts Nuts Washers

M18 stainless steel bolt nut washerProduction Capacity: 500 Ton/Tons per MonthFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Tags: M18 Stainless Steel Bolt Nut Washer M18 Stainless Steel Bolt Nut Washer Din933 Din931 M18 Stainless Steel Bolt Nut Washer

Stainless Steel Bolts Nuts WashersProduction Capacity: 500 Ton/Tons per MonthFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Tags: Stainless Steel Bolts Nuts Washers

stainless steel bolts nuts washersProduction Capacity: 500 Ton/Tons per MonthFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Tags: Steel Bolts Stainless Steel Bolts Nuts Washers

hex fasteners stainless steel bolts nuts washersProduction Capacity: 500 Ton/Tons per MonthFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Tags: Stainless Steel Bolts Nuts Washers Stainless Steel Fasteners Hex Bolt And Nut

Heavy hex bolt stainless steel bolts nuts washersFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Production Capacity: 500 Ton/Tons per MonthTags: Stainless Steel Bolts Nuts Washers Hex Bolt Bolts Nuts Washers

stainless steel bolts nuts washersProduction Capacity: 500 Ton/Tons per MonthFOB Price: US $0.1 to 100 / Piece (Fastener in Every Size)Tags: Stainless Steel Bolts Nuts Washers Stainless Steel Taper Washer M12 Stainless Steel Bolt Nut Washer

• Inconel Machine ScrewsStockist & Suppliers
• Inconel Self Drilling ScrewsStockist & Suppliers
• Inconel Tapping ScrewsStockist & Suppliers
• Inconel Thread CuttingStockist & Suppliers
• Inconel ScrewsStockist & Suppliers
• Inconel Wood ScrewsStockist & Suppliers
• INCONEL SCREWStockist & Suppliers
  PAN HEAD SLOTTED SCREWS , CHEESE HEAD SLOTTED SCREWS , COUNTERSUNK HEAD SLOTTED SCREWS , COUNTERSUNK RAISED HEAD SLOTTED SCREWS , PAN PHILLIPSE HEAD SCREW , COUNTERSUNK PHILLIPSE RAISED HEAD SCREWS , SLOTTED CHEESE TRIM HEAD MACHINE SCREWS , SOCKET HEAD ALLEN CAP SCREWS , ALLEN COUNTERSUNK SOCKET HEAD CAP SCREWS , SOCKET HEAD SHOULDER SCREWS , SOCKET HEAD CAP SCREW LOW HEAD , HEXAGON SOCKET SET SCREW WITH FLAT POINT , HEXAGON SOCKET SET SCEWS WITH CONE POINT , HEXAGON SOCKET SET SCREW WITH DOG POINT , HEXAGON SOCKET SET SCREWS WITH DOG POINT , HEXAGON SOCKET SET SCREWS WITH CUP POINT , IMPRIAL SOCKET CAP SCREWS
  
  INCONEL BOLTSStockist & Suppliers
  STUD BOLTS, HEX HEAD BOLTS, SOCKET HEXAGON HEAD SCREW ANCHOR BOLTS, U-BOLTS, J BOLTS, MUSHROOM HEAD SQUARE NECK BOLTS , T- HEAD BOLTS , WING SCREW EYE BOLT , EYE BOLT, FOUNDATION BOLTS, STRUCTURAL BOLTS.
  
  INCONEL WASHERStockist & Suppliers
  PLAIN WASHER , PLAIN BIG & SMALL OD WASHER , SPRING LOCK WASHER , SPRING WASHER HEAVY DUTY , TOOTH WASHER , STAR WASHER , TAB WASHER WITH ONE & TWO TAB
  
  INCONEL NUTSStockist & Suppliers
  HEXAGON NUTS , HEXAGON COUPLING NUTS , HEXAGON THIN NUT , SQUARE NUT , HEXAGON CASTLE NUTS , SELF LOCKING NUT , HEXAGON DOMED CAP NUTS

• Inconel alloy 600 is a nickel-chromium-iron alloy that is a standard material for applications which require resistance to corrosion and heat. Inconel alloy 600 also has excellent mechanical properties and presents the desirable combination of high strength and good workability. The high nickel content gives Inconel alloy 600 resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride-ion stress-corrosion cracking. Chromium confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions. Inconel alloy 600 is not precipitation hardenable; it is hardened and strengthened only by cold work.

  Inconel alloy 600 is used extensively in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubble towers and condensers for processing of fatty acids; evaporator tubes, tube sheets and flaking trays for the manufacture of sodium sulfide; and equipment for handling abietic acid in the manufacture of paper pulp.

Size :M10 to M36,
NICKEL 200 / 201 Fasteners
Grade: ASTM / ASME SB 574 UNS 10276
IS:1364, 1367, 3757, 6639, 3640
Type :

NICKEL 200 / 201 BOLTS
STUD BOLTS, HEX HEAD BOLTS, SOCKET HEXAGON HEAD SCREW ANCHOR BOLTS, U-BOLTS, J BOLTS, MUSHROOM HEAD SQUARE NECK BOLTS , T- HEAD BOLTS , WING SCREW EYE BOLT , EYE BOLT, FOUNDATION BOLTS, STRUCTURAL BOLTS.

NICKEL 200 / 201 WASHER
PLAIN WASHER , PLAIN BIG & SMALL OD WASHER , SPRING LOCK WASHER , SPRING WASHER HEAVY DUTY , TOOTH WASHER , STAR WASHER , TAB WASHER WITH ONE & TWO TAB

NICKEL 200 / 201 NUTS
HEXAGON NUTS , HEXAGON COUPLING NUTS , HEXAGON THIN NUT , SQUARE NUT , HEXAGON CASTLE NUTS , SELF LOCKING NUT , HEXAGON DOMED CAP NUTS

NICKEL 200 / 201 SCREW
PAN HEAD SLOTTED SCREWS , CHEESE HEAD SLOTTED SCREWS , COUNTERSUNK HEAD SLOTTED SCREWS , COUNTERSUNK RAISED HEAD SLOTTED SCREWS , PAN PHILLIPSE HEAD SCREW , COUNTERSUNK PHILLIPSE RAISED HEAD SCREWS , SLOTTED CHEESE TRIM HEAD MACHINE SCREWS , SOCKET HEAD ALLEN CAP SCREWS , ALLEN COUNTERSUNK SOCKET HEAD CAP SCREWS , SOCKET HEAD SHOULDER SCREWS , SOCKET HEAD CAP SCREW LOW HEAD , HEXAGON SOCKET SET SCREW WITH FLAT POINT , HEXAGON SOCKET SET SCEWS WITH CONE POINT , HEXAGON SOCKET SET SCREW WITH DOG POINT , HEXAGON SOCKET SET SCREWS WITH DOG POINT , HEXAGON SOCKET SET SCREWS WITH CUP POINT , IMPRIAL SOCKET CAP SCREWS

Km Steel India Corporations substantial experience in working with high nickel alloys bolting is crucial as they are extremely difficult materials to machine and can require various forms of additional treatment to ensure full conformity. Related by their high percentage of nickel in their composition, these highly corrosion-resistant materials are widely used in the petrochemical and offshore sector, and are often better known by their registered trade names (e.g. Inconel, Hastelloy, Monel and Nimonic).

We produce inconel fasteners in several grades. Inconels are austenitic nickel-chromium superalloys. They are used in extreme environments, often in gas turbines, nuclear reactors and natural gas processing plants.

Hastelloy bolts & nuts can be most effective under high temperatures and corrosive environments, with high stress resistance.

Km Steel India Corporation manufactures Monel fasteners in A400 and K500. Monel grades are nickel-copper based alloys and have high corrosion resistance and strength properties. They are often used in valves, pumps and heat exchangers.

Km Steel India Corporation produces various grades of Incoloy bolts & nuts. Another of the superalloys, it is used in extreme environments.

Nitronic grade fasteners have excellent corrosion resistance properties and strength. It has low magnetic permeability and excellent cryogenic properties.

• Mirror Buffed
• Hot Dipped Galvanizing
• Epoxy Coating
• Electro Polished
• Passivation
• Teflon Coating
• Oxidized
• Zinc Plating
• Chrome Plating
• Plow Bolt

1/2" x 2" Bright Finish Alloy Steel Pull Dowel Pin

Diameter: 1/2"Finish: BrightLength: 2"Material: SteelStyle: PullType: Dowel PinInternal Thread Size: 1/4"-20Product Weight: 0.1009 lbs.Notes: These dowel pins are ground to a basic diameter of .0002" over the nominal diameter for standard pins and 0.001" over the nominal diameter for oversized pins. They have chamfered ends for easy insertion.

InchDowel Pins 1/32" - 2" diametersPull Dowel Pins 3/16" - 2" diameters(Spiral Grooves and Flat Vents available for air relief)MetricDowel Pins 1mm - 40mm diametersPull Dowel Pins 4mm - 25mm(Spiral Grooves and Flat Vents available for air relief)

Materials:Alloy SteelStainless Steel (18-8, 303, 316, 416)

Precision Ground:.0002, .001, .002 over nominal +/-.0001

Finish:ShinyBlack Oxide

Standards and Specials

Combining the highest quality of materials and sophisticated technology, we are presenting plates that are made with supreme quality carbon and alloy steel. Available in different grades and configurations, the plates manufactured by us hold high tensile strength and possess longer service life. Our complete in house facilities for quality check with all inspection requirements ensure the product range to an excellent standard of quality and performance.

• Boiler Quality Sheet Plate Coil
• High Tensile Steel Sheet Plate Coil
• Abrasion Resistant Steel Plate
• Hot Rolled Sheet Plate Coil
• Cold Rolled Sheet Plate Coil
• Pressure Vessel Steel Plate
• Boiler Steel Plate
• 460 Yield Steel Plate
• Corten Steel Sheet Plate
• Super Duplex Steel Sheet Plate Coils
• Duplex Steel Sheet Plate Coils
• Alloy Steel Sheet Plate Coils
• Monel Sheet Plate Coils
• Hastelloy Sheet Plate Coils
• Titanium Sheet Plate Coils
• Inconel Sheet Plate Coils
• Alloy 20 Sheet Plate Coils
• Inconel Sheet Plate Coils
• Hastelloy Sheet Plate Coils
• Cupro Nickel Sheet Plate Coils
• Monel Sheet Plate Coils
• Nickel Sheet Plate Coils
• Nickel Alloy Sheet Plate Coils
• Copper Alloy Sheet Plate Coils
• Duplex Steel Sheet Plate Coils
• Carbon Steel Sheet Plate Coils
• Stainless Steel Sheet Plate Coils

Offering our clients a wide and unmatched range of stainless steel and duplex steel plates, that are developed keeping into view the different applications of diverse industries. Our qualitative product range is becoming increasingly popular due to low maintenance cost, longevity, corrosion resistance, excellent reliability and precisely engineered construction. Customized as per the requirements of our clients, these plates are offered in different specifications.

• Boiler Quality Sheet Plate Coil
• High Tensile Steel Sheet Plate Coil
• Abrasion Resistant Steel Plate
• Hot Rolled Sheet Plate Coil
• Cold Rolled Sheet Plate Coil
• Pressure Vessel Steel Plate
• Boiler Steel Plate
• 460 Yield Steel Plate
• Corten Steel Sheet Plate
• Super Duplex Steel Sheet Plate Coils
• Duplex Steel Sheet Plate Coils
• Alloy Steel Sheet Plate Coils
• Monel Sheet Plate Coils
• Hastelloy Sheet Plate Coils
• Titanium Sheet Plate Coils
• Inconel Sheet Plate Coils
• Alloy 20 Sheet Plate Coils
• Inconel Sheet Plate Coils
• Hastelloy Sheet Plate Coils
• Cupro Nickel Sheet Plate Coils
• Monel Sheet Plate Coils
• Nickel Sheet Plate Coils
• Nickel Alloy Sheet Plate Coils
• Copper Alloy Sheet Plate Coils
• Duplex Steel Sheet Plate Coils
• Carbon Steel Sheet Plate Coils
• Stainless Steel Sheet Plate Coils

Standards
ASTM/ASME . A240 - UNS S32750EURONORM. 1.4410 - X2 Cr Ni MoN 25.7.4AFNOR. Z3 CN 25.06 Az

Benefits of UNS32750 Super Duplex Stainless Steel

• Improved corrosion resistance in comparison to Duplex
• Greater tensile and yield strength
• Good ductility and toughness
• Good stress corrosion cracking resistance (SSC)
• Opportunity for purchases to reduce their material costs without compromising on quality

Crevice CorrosionThe presence of crevices, almost unavoidable in practical constructions and operations, makes stainless steels more susceptable to corrosion in chloride enviroments. 2507 is highly resistant to crevice corrosion. The critical crevice corrosion temperatures of 2507 and several other high-performance stainless steels are shown above.

Mechanical Properties
Mechanical and Physical Properties
2507 combines high tensile and impact strength with a low coefficient of thermal expansion and high thermal conductivity. These properties are suitable for many structural and mechanical components. The low, ambient, and elevated temperature mechanical properties of 2507 sheet and plate are shown below. All of the test data shown are for samples in the annealed and quenched condition.
2507 is not recommended for applications which require long exposures to temperatures in excess of 5700F because of the increased risk of a reduction in toughness. The data listed here are typical for wrought products and should not be regarded as a maximum or minimum value unless specifically stated.
Mechanical Properties

Nickel 200, also known as UNS N02200, is considered commercially pure 99% wrought nickel, one of the toughest metals. Its characteristics include excellent mechanical properties, a low gas content, low vapor pressure, magnetic properties, and high thermal and electrical conductivity. These properties and its chemical composition make Nickel 200 fabricatable and highly resistant to corrosive environments. It is useful in any environment below 600 F, as well as highly resistant to corrosion by neutral and alkaline salt solutions. Nickel 200 also has low corrosion rates in neutral and distilled water, it can be hot formed to any shape and formed cold by all methods.

• Aerospace
• Chemical
• Defense
• Food Processing
• ASTM / ASME SB 160UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
  ASTM / ASME SB 164UNS 4400 (MONEL 400 )
  ASTM / ASME SB 425UNS 8825 (INCONEL 825)
  ASTM / ASME SB 166UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )
  ASTM / ASME SB 446UNS 6625 (INCONEL 625)
  ASTM / ASME SB 574UNS 10276 ( HASTELLOY C 276 )
  ASTM / ASME SB 472UNS 8020 ( ALLOY 20 / 20 CB 3 )

The K.M Steel stocks Stainless Steel products in many different shapes, sizes, alloys and tempers. Below is an overview of the items we carry.

Pricing is available by contacting our Sales Team, or utilizing the on-line Request for Quote link.

Alloys Available

Description ::
We are instrumental in offering our clients Carbon Steel Round Bars that are fabricated at par with international quality standards. Widely used across various industries, these bars are highly demanded in different parts of the world. Our clients can avail these bars from us in different dimensions and sizes as per their demand and requirement. These steel bars adhere to the following standards:

• CK45
• EN8d
• EN9
• MS
• EN19
• EN24
• Key Specifications/Special Features:
  • Steel round bar
  • Material: SCM420, SCM415, 20Mn-65Mn, 15CrMo-42CrMo, 20Mn2-40Mn
  • Size: 20-100mm, 100-800mm
  • Length: 3-6m
  • Standard: JIS, GB, ASTM
  • Delivery condition: rough turned+quenching and tempering

  41Cr4/40Cr/ASTM5140/SCr440 Hot Rolled Alloy Steel Round Bars

  Key Specifications/Special Features:
  • Material: hot rolled alloy steel
  • Steel grades: 41Cr4, ASTM5140, SCR440 and 40Cr
  • Technical conditions: GB/T3077-1999 (China) and ASTM A29/A29M-04
  • Length: 3 to 6m
  • Size: 12 to 800mm

  GB 42CrMo Alloy Steel Bars with Higher Intensity, Good Fatigue Strength and Better Hardenability

  ASTM 4140

  Key Specifications/Special Features:
  • GB 42CrMo chemical composition:
    • C: 0.38 to 0.45
    • Si: 0.17 to 0.37
    • Mn: 0.50 to 0.80
    • S: 0.035
    • P: 0.035
    • Cr: 0.90 to 1.20
    • Ni: 0.030
    • Cu: 0.030
    • Mo: 0.15 to 0.25
  • Technique: forged
  • GB 42CrMo mechanical property:
    • Tensile strength b: 1, 080 (110)MPa
    • Yield strength s: 930 (95)MPa
    • Elongation 5: 12%
    • Hardness: 217HB
  • Sizes:
    • Diameter: 12 to 200mm
    • Hot rolling: 200 to 800mm
  • Flat bar:
    • Thickness: 10 to 100mm
    • Width: 50 to 500mm
  • Surface treatment: black, coated or galvanized, no flaw and burr or rust
  • Process: EAF + LF + VD + forge
  • Delivery condition: hot rolled, black, annealing and hardness: HBS=160 to 210, or hot rolled/forged + rough machined (black surface after Q/T) + turned (optional)
  • UT: to SEP 1924 C/c and D/d or according to customers request
  • Futures:
    • Compared with 35CrMo, the 42CrMo has higher intensity and better hardenability
    • Good fatigue strength and impact resistance
    • Good low temperature impact toughness
    • No temper brittleness
    • Usually used after tempered
  • Application:
    • Often applied for making important machinery parts, such as bearing, gear, connecting rod, transmission gear, supercharger gear, engine cylinder, spring and rotary shouldered connections (1, 200 to 2, 000mm) for petroleum industry and jar knocker
    • Substitute of hardened and tempered steel with higher chromium composition

Carbon Steel Pipes and Tubes Products

A53 A106 API5L Grade B/C X42 Seamless Pipe
Size Range :1/8" - 26"
Schedules :20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH
Grades :ASTM A53 Gr B, ASME SA53 Gr B, API-5L Gr B, ASTM A106 Gr B, ASME SA106 Gr B, ASTM A106 Gr C, PSL 1 and PSL2

API5L X-42 X-52 X-60 Seamless Pipe
Size Range :2" - 24"
Schedules :Standard (STD), Extra Heavy (XH), 100, 120, 160, XXH
Grades :PSL1 and PSL2

A333 (Low Temp) Grade 1/6 Carbon Steel Seamless Pipe
Size Range :1/2" - 24"
Schedules :Standard (STD), Extra Heavy (XH), 100, 120, 160, XXH

A53 API5L Grade B X-42 X-52 X-60 ERW (Electric Resistance Welded) Pipe
Size Ranges :2" - 24"
Schedules :10, 20, Standard (STD), Extra Heavy (XH)
Non-Schedules :.120wall, .156wall, .188wall, .203 wall, .219wall etc.
Grades :API-5L Gr B, API-5L Gr X42, API-5L Gr X52, API-5L Gr X60, API-5L Gr X65PSL1 and PSL2

API5L Grade B X-42 X-52 X-60 DSAW/SAW
Size Ranges :26" - 60"
Schedules :20, Std, XH, 30,
Grades :API-5L Gr B, API-5L Gr X42, API-5L Gr X52, API-5L Gr X60, API-5L Gr X65PSL1 and PSL2
Sizes (Seamless): 1/2" NB - 60" NB
Sizes (ERW): 1/2" NB - 24" NB
Sizes (SAW): 16" NB - 100" NB
Wall Thickness available:
Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thk

Alloy Steel Seamless Pipes (IBR APPROVED)

Alloy Steel Seamless Pipes (IBR) offered by us is made of alloy steel and feature exceptional performance properties. These are developed for energy-related applications involving oil & gas drilling and therefore are subjected to stresses in machine parts. Further, Alloy Steel Tubes are also used in domestic, professional or industrial areas.

Alloy Steel Seamless Pipes (ASME SA335 Grade P5)Alloy Steel Seamless Pipes (ASME SA335 Grade P5) offered by us are made available in ASME SA335 as well as P1, P5, P9, P11, P12, P91 grades. Our expertise lies in offering these in different sizes & schedules, with IBR & latest edition NACE MR 0175 reports.

Alloy Steel Pipes (ASTM A335 P11)Alloy Steel Pipes (ASTM A335 P11) offered by us are made as per IBR standards and are used mainly for boiler operations. We source these seamless pipes in varied size range. Further, we can also get these customized as per boiler piping requirements. For ensuring in them optimum quality standards, we source these from quality manufacturers. We also offer clients of having their own mark on them.

Alloy Steel Pipes (ASTM A335 P12)Alloy Steel Pipes (ASTM A335 P12) offered by us are available with ASTM A335 P12 standard and finds application in industries like Petrochemicals, Refineries, Fertilizers, Pharmaceuticals and others. We can source these seamless pipes in size range of up to 26 inches.

Alloy Seamless Pipes (ASTM A335 Grade P91 NACE)Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) offered by us are made available in ASTM A335 Grades. Made as per IBR standards, these are mainly used in boiler operations. Further, our expertise lies in offering these pipes in various size range as well as in customized parameters as per boiler piping requirements. Sourced from quality conscious manufacturers, we also offer our clients the option of adding their own mark on them.

Alloy Steel Tubes (ASME SA213 Grade T11)Alloy Steel Tubes (ASME SA213 Grade T11) manufactured and supplied by us are of ASME SA213 Grade. Our expertise lies in offering these in various sizes as well as other specifications as per the required demands. These Alloy Steel Tubes find usage mainly in different industrial applications.

ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9)ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9) manufactured, supplied and exported by us are used for various industrial applications. Our specialization in offering precision engineered alloy steels allow us to deliver these for various engineering applications in various grades like A-387 GR. P1, P5, P9, P11, P12, P22, P91, ASTM A-335 and others. The other specifications include:

ASTM A335 PIPES ASTM A335 GR P5 PIPES ASTM A335 GR P9 PIPES ASTM A335 GR P11 PIPES ASTM A335 GR P22 PIPES ASTM A335 GR P91 PIPESSize Range: 1/8" - 26"Schedules: 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH

Grade:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

• The three specifications listed provide the requirements for manufacture of a variety of forged items, including forged fittings to industry standards such as ASME B16.11.
  These alloys are primarily selected for use in high temperature and/or corrosive environments.
  Incoloy alloys 800H and 800HT are utilized in high temperature services where resistance to creep and rupture is required.

• These three specifications each have their own requirement for ordering material.
  
  A/SA182:Refers to the guidelines in Common Requirements Specification A/SA961, along with addressing any options offered in A/SA182 and any purchaser requirement for manufacturing drawings for approval.
  
  B/SB462:Lists these minimum suggested requirements for placement of an order:1) Quantity.2) Alloy name or UNS number.3) Drawing, if required.4) Forging sectioning, if required.5) ASTM Specification and year of issue.6) Any purchaser inspection requirements.7) Any supplementary requirements.
  
  B/SB564:Lists these minimum suggested requirements for placement of an order:1) Alloy name (UNS number)2) Heat treatment condition.3) Quantity.4) Certification/test report requirements.5) Purchaser requirement for Check Analysis samples, if any.6) Purchaser source inspection requirements, if any.

Manufacturing and presenting a comprehensive range of carbon and alloy steel pipe fittings. Our wide gamut of qualitative products are highly demanded in the global market for their longevity, accurate dimensions and resistance to wear and tear. We make sure that our products is up to the mark and our clients have no complaints. Being a customer centric company, we also offer these forged pipe fittings in standard specifications as well as according to specific demands of our clients.

Forged, 90 Elbow, Street Elbow, Union (Male x Female), 45 Elbow, Bull Plug, Branch Outlet, Tee, Boss, 90 Elbow Outlet, Cross, Swage Nipple, 45 Lateral Tee, Full Coupling, Pipe Nipple, Lateral Outlet, Half Coupling, Adapter, Nipple Branch Outlet, Reducing Coupling, Hex Head Bushing, Union, Pipe Cap, Hex Head Plug, Hex Nipple, Round Head Plug, Square Head Plug Flexolet Threaded

Alloy Steel Seamless Pipes (IBR APPROVED)

Alloy Steel Seamless Pipes (IBR) offered by us is made of alloy steel and feature exceptional performance properties. These are developed for energy-related applications involving oil & gas drilling and therefore are subjected to stresses in machine parts. Further, Alloy Steel Tubes are also used in domestic, professional or industrial areas.

Alloy Steel Seamless Pipes (ASME SA335 Grade P5)Alloy Steel Seamless Pipes (ASME SA335 Grade P5) offered by us are made available in ASME SA335 as well as P1, P5, P9, P11, P12, P91 grades. Our expertise lies in offering these in different sizes & schedules, with IBR & latest edition NACE MR 0175 reports.

Alloy Steel Pipes (ASTM A335 P11)Alloy Steel Pipes (ASTM A335 P11) offered by us are made as per IBR standards and are used mainly for boiler operations. We source these seamless pipes in varied size range. Further, we can also get these customized as per boiler piping requirements. For ensuring in them optimum quality standards, we source these from quality manufacturers. We also offer clients of having their own mark on them.

Alloy Steel Pipes (ASTM A335 P12)Alloy Steel Pipes (ASTM A335 P12) offered by us are available with ASTM A335 P12 standard and finds application in industries like Petrochemicals, Refineries, Fertilizers, Pharmaceuticals and others. We can source these seamless pipes in size range of up to 26 inches.

Alloy Seamless Pipes (ASTM A335 Grade P91 NACE)Alloy Seamless Pipes (ASTM A335 Grade P91 NACE) offered by us are made available in ASTM A335 Grades. Made as per IBR standards, these are mainly used in boiler operations. Further, our expertise lies in offering these pipes in various size range as well as in customized parameters as per boiler piping requirements. Sourced from quality conscious manufacturers, we also offer our clients the option of adding their own mark on them.

Alloy Steel Tubes (ASME SA213 Grade T11)Alloy Steel Tubes (ASME SA213 Grade T11) manufactured and supplied by us are of ASME SA213 Grade. Our expertise lies in offering these in various sizes as well as other specifications as per the required demands. These Alloy Steel Tubes find usage mainly in different industrial applications.

ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9)ASME Alloy Steel Seamless Tubes / Pipes (SA335 Grade P9) manufactured, supplied and exported by us are used for various industrial applications. Our specialization in offering precision engineered alloy steels allow us to deliver these for various engineering applications in various grades like A-387 GR. P1, P5, P9, P11, P12, P22, P91, ASTM A-335 and others. The other specifications include:

ASTM A335 PIPES ASTM A335 GR P5 PIPES ASTM A335 GR P9 PIPES ASTM A335 GR P11 PIPES ASTM A335 GR P22 PIPES ASTM A335 GR P91 PIPESSize Range: 1/8" - 26"Schedules: 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH

• ASTM / ASME SA 276 TP 304, 304L, 309S, 309H, 310S, 316, 316L, 316 TI, 317, 321, 347, 410, 420, 430, 431, 440A, B & C, 446
• ASTM / ASME SA 479 TP 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316 TI, 317, 321, 321H, 347, 347H, 410, 430, 431 & 444

• ASTM / ASME SA 269 GR. TP 304, 304L, 316, 317, 321
• ASTM / ASME SA 213 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316LN, 317, 317L, 321, 321H, 347, 347H

• Manufacturers Test Certificate
• IBR Test Certificate