Our Products
Socket Head Shoulder Bolts are purposed for use in punch or die applications in the placing of stripper plates. Socket Head Shoulder Bolts are a precision made product with a polished shoulder, manufactured to precise measurements and tolerances
Socket Head Shoulder Bolts can be guides for banking and forming presses.
Socket Shoulder Screws are available in metric sizes from M5 to M12 and are commonly used as standard fasteners on many applications.
The head of the cap screw has a hexagonal recessed drive this can be adjusted using a Hex driver or Allen key.
Alternative names for socket shoulder screws are: Hex Shoulder Socket Screws, socket head shoulder screws, Shoulder hex screws, Metric shoulder screws.
Nominal Size |
D | H | X | S | K | F | L | ||||
Head Diameter |
Head Height |
Head Side Height |
Hexagon Socket Size |
Key Engage ment |
Fillet Extension | Max Standard Length |
|||||
Max | Min | Max | Min | Ref | Nom | Min | Max | Min | Nom | ||
4 5 6 8 |
0.213 0.238 0.262 0.312 |
0.201 0.226 0.250 0.298 |
0.059 0.066 0.073 0.087 |
0.051 0.055 0.063 0.077 |
0.015 0.015 0.015 0.015 |
1/16 5/64 5/64 3/32 |
0.062 0.078 0.078 0.094 |
0.035 0.044 0.044 0.052 |
0.010 0.010 0.010 0.015 |
0.005 0.005 0.005 0.010 |
0.50 0.50 0.63 0.75 |
10 1/4 5/16 3/8 |
0.361 0.437 0.547 0.656 |
0.347 0.419 0.527 0.636 |
0.101 0.132 0.166 0.199 |
0.091 0.122 0.152 0.185 |
0.020 0.031 0.031 0.031 |
1/8 5/32 3/16 7/32 |
0.125 0.156 0.188 0.219 |
0.070 0.087 0.105 0.122 |
0.015 0.020 0.020 0.020 |
0.010 0.015 0.015 0.015 |
1.00 1.00 1.00 1.25 |
1/2 5/8 |
0.875 1.000 |
0.851 0.970 |
0.265 0.331 |
0.245 0.311 |
0.046 0.062 |
5/16 3/8 |
0.312 0.375 |
0.175 0.210 |
0.030 0.030 |
0.020 0.020 |
2.00 2.00 |
MONEL BOLTS
STUD BOLTS, HEX HEAD BOLTS, SOCKET HEXAGON HEAD SCREW ANCHOR BOLTS, U-BOLTS, J BOLTS, MUSHROOM HEAD SQUARE NECK BOLTS , T- HEAD BOLTS , WING SCREW EYE BOLT , EYE BOLT, FOUNDATION BOLTS, STRUCTURAL BOLTS.
MONEL WASHER
PLAIN WASHER , PLAIN BIG & SMALL OD WASHER , SPRING LOCK WASHER , SPRING WASHER HEAVY DUTY , TOOTH WASHER , STAR WASHER , TAB WASHER WITH ONE & TWO TAB
MONEL NUTS
HEXAGON NUTS , HEXAGON COUPLING NUTS , HEXAGON THIN NUT , SQUARE NUT , HEXAGON CASTLE NUTS , SELF LOCKING NUT , HEXAGON DOMED CAP NUTS
MONEL SCREW
PAN HEAD SLOTTED SCREWS , CHEESE HEAD SLOTTED SCREWS , COUNTERSUNK HEAD SLOTTED SCREWS , COUNTERSUNK RAISED HEAD SLOTTED SCREWS , PAN PHILLIPSE HEAD SCREW , COUNTERSUNK PHILLIPSE RAISED HEAD SCREWS , SLOTTED CHEESE TRIM HEAD MACHINE SCREWS , SOCKET HEAD ALLEN CAP SCREWS , ALLEN COUNTERSUNK SOCKET HEAD CAP SCREWS , SOCKET HEAD SHOULDER SCREWS , SOCKET HEAD CAP SCREW LOW HEAD , HEXAGON SOCKET SET SCREW WITH FLAT POINT , HEXAGON SOCKET SET SCEWS WITH CONE POINT , HEXAGON SOCKET SET SCREW WITH DOG POINT , HEXAGON SOCKET SET SCREWS WITH DOG POINT , HEXAGON SOCKET SET SCREWS WITH CUP POINT , IMPRIAL SOCKET CAP SCREWS
the cup point is the most comonly used set screw. It has a cup-shaped indentation on one end. The cup point is used for quick, permanent and semi-permanent part assemblys and where the cutting in of the cup point edge is acceptable.
Nominal Size** | Key Engage-ment (K) | Cup & Flat Point Diameter (F) | Oval Point Radius (R) | Cone Point Angle* (A) | Half Dog Point | ||||
Diameter (D) | Length (H) | ||||||||
Min | Max | Min | Basic | Max | Min | Max | Min | ||
0 | 0.050 | 0.033 | 0.027 | 0.045 | 0.09 | 0.040 | 0.037 | 0.017 | 0.013 |
1 | 0.060 | 0.040 | 0.033 | 0.055 | 0.09 | 0.049 | 0.045 | 0.021 | 0.017 |
2 | 0.060 | 0.047 | 0.039 | 0.064 | 0.13 | 0.057 | 0.053 | 0.024 | 0.020 |
3 | 0.070 | 0.054 | 0.045 | 0.074 | 0.13 | 0.066 | 0.062 | 0.027 | 0.023 |
4 | 0.070 | 0.061 | 0.051 | 0.084 | 0.19 | 0.075 | 0.070 | 0.030 | 0.026 |
5 | 0.080 | 0.067 | 0.057 | 0.094 | 0.19 | 0.083 | 0.078 | 0.033 | 0.027 |
6 | 0.080 | 0.074 | 0.064 | 0.104 | 0.19 | 0.092 | 0.087 | 0.038 | 0.032 |
8 | 0.090 | 0.087 | 0.076 | 0.123 | 0.25 | 0.109 | 0.103 | 0.043 | 0.037 |
10 | 0.100 | 0.102 | 0.088 | 0.142 | 0.25 | 0.127 | 0.120 | 0.049 | 0.041 |
1/4 | 0.125 | 0.132 | 0.118 | 0.188 | 0.31 | 0.156 | 0.149 | 0.067 | 0.059 |
5/16 | 0.156 | 0.172 | 0.156 | 0.234 | 0.38 | 0.203 | 0.195 | 0.082 | 0.074 |
3/8 | 0.188 | 0.212 | 0.194 | 0.281 | 0.44 | 0.250 | 0.241 | 0.099 | 0.089 |
7/16 | 0.219 | 0.252 | 0.232 | 0.328 | 0.50 | 0.297 | 0.287 | 0.114 | 0.104 |
1/2 | 0.250 | 0.291 | 0.270 | 0.375 | 0.57 | 0.344 | 0.334 | 0.130 | 0.120 |
5/8 | 0.312 | 0.371 | 0.347 | 0.469 | 0.75 | 0.469 | 0.456 | 0.164 | 0.148 |
3/4 | 0.375 | 0.450 | 0.425 | 0.562 | 0.88 | 0.562 | 0.549 | 0.196 | 0.180 |
7/8 | 0.500 | 0.530 | 0.502 | 0.656 | 1.00 | 0.656 | 0.642 | 0.227 | 0.211 |
1 | 0.562 | 0.609 | 0.579 | 0.750 | 1.13 | 0.750 | 0.734 | 0.260 | 0.240 |
*Angle is 90-degrees (+/-2 degrees) for these lengths and over, and it is 118-degress (+/-2 degrees) for shorter lengths.
Socket Set Screws : Nominal Screw Length | |||
---|---|---|---|
Tolerance on Length |
Nominal Screw Length | ||
Up to 0.63" (Inclusive) | Over 0.63" - 2" (Inclusive) | Over 2" - 6" | |
+/-0.01 | +/-0.02 | +/-0.03 |
Socket Set Screws (Alloy Steel) ASME B18.3-2003 | |||||
---|---|---|---|---|---|
Nominal Size | Shortest Nominal Length to Which Column A Applies | Hex Key Size (S) | Tightening Torque (inch/lbs.) | ||
Cup & Flat Point | Cone & Oval Point | Half Dog Point | |||
0 | 0.13 | 0.13 | 0.13 | 0.028 | 0.86 |
1 | 0.13 | 0.19 | 0.13 | 0.028 | 0.86 |
2 | 0.13 | 0.19 | 0.19 | 0.035 | 1.8 |
3 | 0.19 | 0.19 | 0.19 | 0.050 | 5 |
4 | 0.19 | 0.19 | 0.19 | 0.050 | 5 |
5 | 0.19 | 0.19 | 0.19 | 1/16 | 9.5 |
6 | 0.19 | 0.25 | 0.19 | 1/16 | 9.5 |
8 | 0.19 | 0.25 | 0.25 | 5/64 | 19.4 |
10 | 0.19 | 0.25 | 0.25 | 3/32 | 33.5 |
1/4 | 0.25 | 0.31 | 0.31 | 1/8 | 77.9 |
5/16 | 0.31 | 0.44 | 0.38 | 5/32 | 156 |
3/8 | 0.38 | 0.44 | 0.44 | 3/16 | 273 |
7/16 | 0.44 | 0.63 | 0.50 | 7/32 | 428 |
1/2 | 0.50 | 0.63 | 0.63 | 1/4 | 615 |
5/8 | 0.63 | 0.88 | 0.88 | 5/16 | 1315 |
3/4 | 0.75 | 1.00 | 1.00 | 3/8 | 2150 |
7/8 | 0.8 | 1.00 | 1.00 | 1/2 | 5130 |
1 | 1.00 | 1.25 | 1.25 | 9/16 | 7010 |