Features
supplies oil one by one simultaneously from 1 to 10 points with single control to deliver oil to the machine directly without help of motor
mechanical drive will be taken from any moving or sliding part of the machine.
with single control 6 to 32 line of lubrication point as required.
the range of pumps available with us are :

Model

• jv06
• jv08
• jv12
• jv16

as per required lubricating points.

Consisting of an oil distributor and oil pumping unit, our motorized oil pump operates with the pressure specification of up to 30 psi. Every revolution of lubricator shaft results in oil being delivered through one of the outlet. The oil delivery revolutions are measurable in the range of 0 to 0.3 ml. the flow of oil is controllable and the lubricators available with us depends on required lubrication point. Standard models of our motorized oil pump are MJV-06, MJV-08, MJV-010, MJV-12 & MUV-16.

Equipment : (model no. DJP)

Applications

• mixing mill
• extruders
• ban berry
• kneader
• inter mix.

Features

• discharge pressure 500kg / cm
• pressure control valve
• pressure indicating n. R. V.
• pressure gauges
• oil low level alarm arrangement
• check valve.
• individual control on oil delivery.
• 0 to 0. 3 CC. Per RPM 0 to 500
• pressure switch

Please send in your queries for details of our new model 'automatic spraying and lubricanting pump'

Pressure feed lubricator delivers oil to all its outlet in one revolution. Each line has a feed regulator. Maximum pressure 2000 PSI.

Oil delivery per revolution can be regulated from 0 to 0. 3 ml. Lubricator is provided with a handle and primping pump on each supply line, to give initial primping to drainout tubes of oil delivery system. Lubricator model rhp is available as per lubricating points.

Motorised drive upto 60 RPM only

1. Reservoir.2. Oil inlet with filter.3. Feed regulator.4. Filler cap.5. Oil feeder.6. Primping unit.7. Cylinder.8. Piston.

Please send in your queries for details of our new model 'automatic spraying and lubricanting pump'

Applications

• mixing mill
• extruders
• calendars
• kneader
• inter mix

Features

• supplies grease one by one simultaneously from 4 to 16 points
• discharge pressure 0 to 30 PSI
• discharge quantity 0. 75 gms per stroke. As per requirement and specifications.
• drive like ratchet / motorised / pneumatic or manually
• delivers grease for any viscosity up to 15 meters
• we can manufacture pumps for any viscosity.

Features
supplies oil one by one simultaneously from 1 to 10 points with single control to deliver oil to the machine directly without help of motor
mechanical drive will be taken from any moving or sliding part of the machine.
with single control 6 to 32 line of lubrication point as required.
the range of pumps available with us are :

Model

• jv06
• jv08
• jv12
• jv16

as per required lubricating points.

Consisting of an oil distributor and oil pumping unit, our motorized oil pump operates with the pressure specification of up to 30 psi. Every revolution of lubricator shaft results in oil being delivered through one of the outlet. The oil delivery revolutions are measurable in the range of 0 to 0.3 ml. the flow of oil is controllable and the lubricators available with us depends on required lubrication point. Standard models of our motorized oil pump are MJV-06, MJV-08, MJV-010, MJV-12 & MUV-16.

Equipment : (model no. DJP)

Applications

• mixing mill
• extruders
• ban berry
• kneader
• inter mix.

Features

• discharge pressure 500kg / cm
• pressure control valve
• pressure indicating n. R. V.
• pressure gauges
• oil low level alarm arrangement
• check valve.
• individual control on oil delivery.
• 0 to 0. 3 CC. Per RPM 0 to 500
• pressure switch

Please send in your queries for details of our new model 'automatic spraying and lubricanting pump'

Pressure feed lubricator delivers oil to all its outlet in one revolution. Each line has a feed regulator. Maximum pressure 2000 PSI.

Oil delivery per revolution can be regulated from 0 to 0. 3 ml. Lubricator is provided with a handle and primping pump on each supply line, to give initial primping to drainout tubes of oil delivery system. Lubricator model rhp is available as per lubricating points.

Motorised drive upto 60 RPM only

1. Reservoir.2. Oil inlet with filter.3. Feed regulator.4. Filler cap.5. Oil feeder.6. Primping unit.7. Cylinder.8. Piston.

Please send in your queries for details of our new model 'automatic spraying and lubricanting pump'

Applications

• mixing mill
• extruders
• calendars
• kneader
• inter mix

Features

• supplies grease one by one simultaneously from 4 to 16 points
• discharge pressure 0 to 30 PSI
• discharge quantity 0. 75 gms per stroke. As per requirement and specifications.
• drive like ratchet / motorised / pneumatic or manually
• delivers grease for any viscosity up to 15 meters
• we can manufacture pumps for any viscosity.