Jvc Separation Engineers Pvt. Ltd. Navi Mumbai, Maharashtra

vibration generator and an ultrasonic transducer. The ultrasonic generator is connected to 230v power supply & it excites the transducer with ultrasonic frequency [up to 34 KW]. The ultrasonic transducer is fitted in a resonating frame that is welded to the mesh frame. The ultrasonic transducer is connected to the ultrasonic generator through a cable. The ultrasonic transducer transmits the vibrations to the mesh through the resonating frame. Each wire of the mesh is vibrated at high frequency which helps in removal of embedded particles in the mesh & also prevents further choking of mesh. It also helps in breaking of agglomerates.

This is a unique combination of the Gyroscreen and blower to achieve optimally clean products. The food grains contain contaminants like stones, pebbles and other particles like seed cover, twigs etc. The grains are fed to the gyroscreen continuously through the inlet at the top. The oversize material is removed by the 1st screen and it is passed on to the 2nd screen, here the grains are retained on the screen and the heavier unwanted undersize particles pass through it. The light material that is mixed with the grains and is not easily separated by the vibrations of the Gyroscreen is sucked out by the blower and collected in the cyclone. This system is very useful for super markets which will help in minimizing manual cleaning of the grains.

• AdvantagesMinimum Blinding, No Transmitted Vibration.

Gryoscreen is the most efficient vibrating screen for wet and dry screening.Gyroscreens are equipped to handle up to five different screens one on the top other with feed trays in between to give six precise sized fraction in single screening operation. Special design with seven screens is also available for grading, Greater capacity & more accurate screening, Longer Screen Life.

• speed15000 r.p.m

The Tubular Centrifuge comprises of bowl, specially designed slow acceleration motor & starter. The bowl rotates at 15000 r.m.p. generating a centrifugal force of 16000 times the gravitational force. The liquid mixture to be separated enters the nozzle of the centrifuge placed at the bottom of the base. The centrifugal force acts on the liquid entering and separates the two liquids according to their specific gravities. The lighter liquid forms the inside layer and heavier liquid forms the outer layer. Since the mixture is entering continuously in the bowl, two phases are discharged continuously from two separate outlets provided on the top portion of the machine. During clarification job, one discharge of clarified liquid is possible. Solids accumulated inside the bowl can be removed manually after stopping the machine.

• ranges10-30

The chipper chamber consists of rotary plate with sets of knives to cut the material against fixed knives at inlet hopper. Material is further ground to the required size in adjacent chamber consisting of hammers mounted on central plates. Size of the final product is obtained by screen size provided in the chamber.Motor HP ranges from 10-30; Capacity depends on material consistencies. Application: To chip and cut branches, twigs, plants and shrubs. It can be used for making pulp, input feed material for boilers etc.

The graded Tea is automatically discharged from the Gyroscreen. No loss of bloom on shifting due to minimum handling. The Gyroscreen can be installed as per desired layout. Re-screening is not necessary. This helps in minimum handling of Tea. The proper tension of screen increases screen life. The cleaning of machine is easy compared to conventional screens. Minimum maintenance required for the machine thus reducing down time.