Our Products
Transmitter Device
2 Products availableMeasurement Gauges & Fittings
2 Products availableTransformers
2 Products availableCalibrators
1 Products availableTransducer
1 Products availableHVAC System
1 Products availableSecurity, Metal & Leak Detectors
1 Products availableOur Complete range of products are wireless loggers, industrial Transmittters, LVDT Gage Heads, Transmitters for Moisture and Thermal Mass Flow.
E+E Transmitter Series EE36 are specially designed for themeasurement of water content in oil. EE36 is ideal for onlinemonitoring of moisture in lubrication or insulation oil, which isvery important for the long-term performance and adaptivemaintenance of plant and machinery.
For instance, moisture affects dramatically the insulationcharacteristics of electrical transformer oil and thereforecontinuous monitoring is extremely important.
The R30A RVDT (Rotary Variable Differential Transformer) is an angular position sensor that incorporates a proprietary non-contact design which dramatically improves long term reliability when compared to other traditional rotary devices such as synchros, resolvers and potentiometers. This unique design eliminates assemblies that degrade over time such as slip rings, rotor windings, contact brushes and wipers, without sacrificing accuracy.
FeaturesThe inline flow meter EE771/EE772, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow in pipelines DN15 (1/2) up to DN80 (3). Measurement of for instance the usage of compressed air, nitrogen, CO2, oxygen, helium or other non-corrosive, non-flammable gasses.
The flowmeters are setting new standards in terms of measurement accuracy and reproducibility thanks to their applicationspecific adjustment during production. As such, the EE771/EE772 is adjusted under a pressure of 7 bar.
The unique mounting concept with a mounting valve permits rapid installation and removal of the device for periodical calibration. It simultaneously ensures high measurement accuracy through exact and reproducible positioning in the pipe.
FeaturesUltrasonic level meters ULMis self contained device that includes electroacoustics transducer and electronic module. The level meter ULM transmits series of ultrasonic pulses which propagates towards the liquid surface. Reflected acoustic wave is received back in the ULM transducer and processed in electronic module. The distance calculations are based on time of flight of the acoustic wave to the level and back.
FeaturesSchaevitzP900 Series Strain Gauge Pressure Transducersare premium grade sensors that provide highly precisemeasurement of absolute, vented gauge, or sealed gaugepressures over wide temperature ranges.
Standard versions of this transducer use a 17-4 pHstainless steel diaphragm to sense pressure (Inconelversions are available for operation in highly corrosiveenvironments). The deflection of the diaphragm istransferred to a double cantilever beam by a force transferrod. Strain in the beam, and therefore, input pressure ismeasured by four foil strain gauges.
FeaturesThe R120LC RVIT (Rotary Variable Inductance Transducer) is a cost efficient, DC operated non-contact angular position sensor. It provides a smooth 0.5 to 4.5VDC output, ratiometric to the supply voltage and proportional toangular position over the 120 degree sensing range. The R120LC utilizes non-contacting, differential inductive technology, and does not suffer the wear problems experienced by potentiometers.
FeaturesThe HR Series general purpose LVDTs provide the optimum performance required for a majority ofapplications. The large 1/16 inch [1.6mm] bore-to-core radial clearance provides for ample installation misalignments and therefore reduces the application costs. Featuring a high output voltage and a broad operating frequency range, these versatile and highly reliable LVDTs deliver worry-free and precise position measurements.
FeaturesThe EE75 series air velocity transmitters were developed to obtain accurate measuring results over a wide range of velocitiesand temperatures.
A high-quality hot film sensor element based on cutting-edge thin filmtechnology ensures maximum sensitivity, even at lowest mass flows.At the same time, the innovative probe design produces reliablemeasuring results at high flow velocities of up to 40m/s (8000ft/min).
The integrated temperature compensation minimises the temperaturecross-sensitivity of the EE75 series which, combined with the robustmechanical design, allows it to be used at process temperaturesbetween -40 to +120C (-40 to 248F).
In addition to air velocity and temperature values, the transmittercalculates the volumetric flow rate in m/h or ft/min. The cross section of the duct needs to be determined for this purpose and thevolumetric flow rate can be displayed and directed to one of theanalogue outputs.
FeaturesThe AngleStarProtractor System (APS) is a ready to use, stand alone system for angle measurements. The system incorporates a special AccuStar I ratiometric electronic clinometer, a digital LCD display, and a four foot interconnecting cable (cable lengths up to 200 feet are available, consult factory for details).
FeaturesThe CTS-420 Series is a 2-wire current loop position transmitter system especially suited to measurements in process industries. Each system consists of either an HCI Series LVDT linear position sensor or an R36AS RVDT rotary positionsensor, along with an electronics module which provides a 4-20mA current loop output.
FeatureseSENSE is a new simple, low cost, state-ofthe-art, infrared and maintenance-free carbondioxide transmitter for installation in the climate zone or in the ventilation duct.
eSENSEmeasures the carbon dioxide concentration in the ambient air up to 2000 ppm and transforms the data into an analogue output.
eSENSEhelps you save money by decreasing your energy consumption while creating a healthier indoor climate!
FeaturesSenseAirs patented state-of-the-art goldplated infrared (NDIR) waveguide technology offers reliable measurements
The M5100 series pressure transducers from the Microfused line of MEAS, set a new price performance standard for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildlycorrosive fluids.
FeaturesThe series A1 is a patent pending microprocessor based digital pressuregauge for positive, negative, and differential measurement designed tobe a direct replacement for mechanical gauges.
FeaturesThe robust multi functional hand-held meets the highest requirements and comes with a wide range of accurate probes that fit various applications.Use touch-screen navigation to show, up to three measurement values simultaneously on the capacitive TFT display.
FeaturesThe Series 104 Differential Pressure Switch is a low-cost easy to use switch for very low pressure applications. The switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for 2A @ 250V and can be set as low as 0.08 w.c. (20 Pa)
The new hygrometer EE02 is the combination of high accuracy measurement technology with modern design.
The relative humidity and temperature values with trend indication are alternating on the large display.
High quality E+E sensor technology and state of the artmicroprocessor based electronics result in highest accuracy and long term stability. The very low power consumption allows battery operation and independence from external power supply.
The standard batteries, replaceable by the user, have a life time about 5 years. The modern housing concept makes the wall mounting very easy.
EE02 can be used as bench mount as well, the free standing kit is included in the scope of supply. EE02 is available upon request as OEM thermo-hygrometer with your company logo.
Typical Applicationsclimate monitoring for:
aSENSE is an all digital low cost transmitter for installation in the climate zone. It measures both CO2concentration and temperature in the ambient air. Thedata is transmitted to a BMS system or controller.
aSENSEis a key component for climate control of buildings and other processes. It is also a cost-efficient gas alarm sensor for spaces where carbon dioxide gas is apotential danger.
FeaturesThe ATA-2001 is a general purpose, AC line-powered, LVDT/RVDT analog conditioner with digital setup andcalibration. The embedded microprocessor generates a PWM-shaped sine wave and handles all calibration functions. It also controls the demodulation, filtration and synchronization of the LVDT or RVDT transducersignal. All settings are stored in non-volatile memory for restoration on power up. Zero, Gain and Phase adjustments are accomplished via the use of splash-proof front panel pushbuttons and digital voltage dividers. Intended for the most demanding industrial applications, the ATA 2001 is CE certified, and has been rigorously tested to the highest industrial standards for EMI, RFI and ESD.
FeaturesThe EE575 is a compact air velocity transmitter designed forhigh volume applications. Due to the small design, the module can be fitted to nearly every application.
The use of a high-quality E+E thin film sensor element based on the hot film anemometer principle ensures optimal precision and maximum sensitivity.
FeaturesThe Series VF Air Flow Capture Hood accurately measures air volume flowing through registers, diffusers and grills. The Air Flow Capture Hood is light weight and is easily handled by one person for measuring supply or exhaust airflow. The large LCD simultaneously displays airflow, velocity and temperature and can store up to 100 readings in a non volatile memory for later analysis. Later analysis of the Air Flow Capture Hood data is easily downloaded to your computer with the included RS-232 cable and software. Each Series VF Air Flow Capture Hood includes airflow measuring base, 2 x 2 (610 mm) hood, brackets, RS-232 cable, software, nylon carrying case, batteries, and calibration data sheet.
Model pSENSE is a low cost flexible and easy to use hand-held, instrument designed to measure the carbon dioxide concentration and temperature in surrounding air.
The large illuminated display presents the 2 values simultaneously.
Built-in data output (RS232) makes it simple to log data for longer time. Audible alarm is included . Max/Min Average as well as TWA and STEL measurements are also available.
The carbon dioxide sensors gold-plated infra-redwaveguide and diffusion membrane filter provides you great reliability, accuracy and long term stability.