Offered by us in different specifications, our Industrial Steam Boiler works on low to medium pressure. Owing to our reliable transportation facilities, we are able to deliver the orders at the desired destination and on promised time. Obtain the extensive array of products from our well-established inventory located in Ghaziabad(India).

REVOTHERM is the conventional forced circulation type water tube coil type boiler incorporating the unique principle of combustion known as Reverse Flow. This flow of flue gases enhances the combustion efficiency and also allows a high rate of heat release to the surrounding water coil. It can be offered in both IBR and Non-IBR designs Revotherm Construction A Water tube Coil type boiler comprises of a jacketed MS shell housing a helical coil. The combustion air is forced through the jacketed shell by means of a centrifugal blower thereby getting it pre-heated. In the coil, the flame travels downwards first because of vertical fit-up of the burner inside the coil then the flue gases reverse upwards in the same coil thereby giving two passes in the same radiant zone ensuring complete combustion and higher heat flux. The third pass of the flue gases is in the convective zone between the coil and the inner shell; here the flue gases supply heat to the external surface of the coil. Now from the boiler, flue gases then travel to the Economizer (shell and tube type design) forming the fourth pass. The inner shell separates the flue gases and outer shell. Ceramic blanket is applied on the inner side of the outer shell to reduce the heat transfer to the ambient and the surface temp. Of the outer shell.Advantages: Fully Automatic unitUnique four pass designHigh efficiency and low running costMinimum site-work, low installation costsInstant streaming within 5 minutes of cold startBuilt-in economiser increases the operating efficiencyFail-safe design and dependable operating instrumentsCapacity:- Revotherm- Water Tube Coil Type Boiler is available in capacities from 1 hundred Kg/hr to 12 hundred Kg/hr. We, at Json, design and manufacture the Revotherm Boiler for both Liquid/Gas Fired Fuels. And the best part is that complete fit-up of mountings, fittings and accessories is checked, inspected which is further followed by a test run of the Boiler to ensure m

We are offering Hot Air Generator with self indicating purification technology. We use superior-grade packaging as barrier protection for our products against dust, moisture, mechanical damages and logistical jostling. Our products packaging is premium. We are connected with well-known transport providers to make sure the distribution of deliveries is done out without a problem and on time.

We have gained a wide recognition in the industry by offering Thermax Burner Gun to the clients. We carry out our operations from Uttar Pradesh, India. It is engineered under the supervision of adroit professionals, who thoroughly adhere to the predefined industrial standards and norms. It can be customized as per the specifications provided by the client. We are renowned for making timely deliveries of our consignments.

 

Specifications :

• Sizes available - 22 mm, 27 mm, and 32 mm
• Suitable for - HSD LDO
• Furnace Oil used for: Steam and Hot water boilers

The offered lot of Industrial Burner Spare Parts comprises Electric fan for combustion air, Control panel for smooth operations and other. We have the moat upgraded machines and technology to make sure that the raw material is completely in compliance with the set standards. This helps us in presenting good quality and defect free products. With the help of our brilliant logistics network, we render safe and time-bound deliveries.

Offered by us in different specifications, our Industrial Steam Boiler works on low to medium pressure. Owing to our reliable transportation facilities, we are able to deliver the orders at the desired destination and on promised time. Obtain the extensive array of products from our well-established inventory located in Ghaziabad(India).

REVOTHERM is the conventional forced circulation type water tube coil type boiler incorporating the unique principle of combustion known as Reverse Flow. This flow of flue gases enhances the combustion efficiency and also allows a high rate of heat release to the surrounding water coil. It can be offered in both IBR and Non-IBR designs Revotherm Construction A Water tube Coil type boiler comprises of a jacketed MS shell housing a helical coil. The combustion air is forced through the jacketed shell by means of a centrifugal blower thereby getting it pre-heated. In the coil, the flame travels downwards first because of vertical fit-up of the burner inside the coil then the flue gases reverse upwards in the same coil thereby giving two passes in the same radiant zone ensuring complete combustion and higher heat flux. The third pass of the flue gases is in the convective zone between the coil and the inner shell; here the flue gases supply heat to the external surface of the coil. Now from the boiler, flue gases then travel to the Economizer (shell and tube type design) forming the fourth pass. The inner shell separates the flue gases and outer shell. Ceramic blanket is applied on the inner side of the outer shell to reduce the heat transfer to the ambient and the surface temp. Of the outer shell.Advantages: Fully Automatic unitUnique four pass designHigh efficiency and low running costMinimum site-work, low installation costsInstant streaming within 5 minutes of cold startBuilt-in economiser increases the operating efficiencyFail-safe design and dependable operating instrumentsCapacity:- Revotherm- Water Tube Coil Type Boiler is available in capacities from 1 hundred Kg/hr to 12 hundred Kg/hr. We, at Json, design and manufacture the Revotherm Boiler for both Liquid/Gas Fired Fuels. And the best part is that complete fit-up of mountings, fittings and accessories is checked, inspected which is further followed by a test run of the Boiler to ensure m

We are offering Hot Air Generator with self indicating purification technology. We use superior-grade packaging as barrier protection for our products against dust, moisture, mechanical damages and logistical jostling. Our products packaging is premium. We are connected with well-known transport providers to make sure the distribution of deliveries is done out without a problem and on time.

We have gained a wide recognition in the industry by offering Thermax Burner Gun to the clients. We carry out our operations from Uttar Pradesh, India. It is engineered under the supervision of adroit professionals, who thoroughly adhere to the predefined industrial standards and norms. It can be customized as per the specifications provided by the client. We are renowned for making timely deliveries of our consignments.

 

Specifications :

• Sizes available - 22 mm, 27 mm, and 32 mm
• Suitable for - HSD LDO
• Furnace Oil used for: Steam and Hot water boilers

The offered lot of Industrial Burner Spare Parts comprises Electric fan for combustion air, Control panel for smooth operations and other. We have the moat upgraded machines and technology to make sure that the raw material is completely in compliance with the set standards. This helps us in presenting good quality and defect free products. With the help of our brilliant logistics network, we render safe and time-bound deliveries.