J.p. Deburring Brushes

Jalahalli West, Bangalore, Karnataka

These BRUSHES are mainly used in the latex applications like surgical gloves and condom manufacturing units. These segment brushes can be joined together to any length desired. Normally the Beading, stripping, washing brushes are made out of the segmental brushes. The advantage of the segmental brushes are these can be substituted part by part with the minimum time during the servicing of the plant. Made out of Nylon-66 bristles it withstands the high temperature generated in the process of Beading, drying & Stripping .

The company has cemented its presence among the renowned Manufacturers, Suppliers and Exporters of Disc Brushes. The Disc Brushes we make available are used for removing burrs, blending tool marks and finishing flat metal surfaces. Bulk orders of the Brushes are processed by us as per the specific requirements of the buyers. One can obtain the Brushes at market-leading rates from us.

We bring forth a huge gamut of Cylindrical Brushes for the clients. We offer wide faced Cylindrical Brushes that are perfect for uniform hairline finish as well as satin and mat finish on both non-ferrous and ferrous metal surfaces. Cylindrical Brushes remove contamination and debris from flat surfaces. With the use of Cylindrical Brushes, a consistent anchor pattern is generated which helps in improving surface for better coating. Applications :

• Brightening
• Copper surface cleaning
• Scrubbing
• Roughening phenolic
• Deburring holes

Specifications :

• Diameter : 4â��, 5", 6â��, 8â��, 10â��
• Length : 10 mm to 2000 mm
• Grits : 80, 120, 180, 240, 320, 500

Located in Bangalore, we are famed Manufacturer, Supplier and Exporter of world-class Floor Cleaning Disc Brushes across the country and abroad. Reckoned for robustness, user-friendly nature, unrivaled performance and durable life, we offer these Disc Brushes in numerous specifications. For quality assurance, rigorous screening and testing are done. Meticulously packaged Floor Cleaning Disc Brushes can be purchased from us at budget-friendly prices, within stipulated time.

Leveraging on years of our industrial expertise, we are ably meeting the demands of clients by providing desired range. Our company is renowned for its ability of manufacturing and supplying a superior quality range of disc brushes. Manufactured using high quality raw material, our range is widely acknowledged among clients for their unmatched features. Clients can avail products from us at reasonable rates. applications: deburring flat surfaces on machinedimproving texture characteristics on machined or ground surfacesdeburring face-milled castings or forgingsdeburring punched componentsedge radiusing available types: tufted style (light deburring) disc brushes are available in following diameters: 60, 80, 100, 115, 125, 150, 200, 250

JPN Brush House is engaged in providing an extensive assortment of Nylon Brush. Made using the finest quality material, parts and components, these Nylon Brushes are highly durable, sturdy and reliable. Moreover, because of the lightweight and easy usage, the Nylon Brushes are high on demand. Clients can avail Nylon Brush in different specifications at the most reasonable prices. Highlights :

• Rigid make
• Long life
• Lightweight
• Fairly priced

The Floor Cleaning Roller Brushes, we provide, are made utilizing most scoring technology and finest raw materials, so as to provide efficient cleaning operations on the most resilient surfaces. Bagging lot of user accolades, these Brushes give precise and high speed cleaning with minimal time and water consumption. Buy the Floor Cleaning Roller Brushes from us in different specifications. We assure nominal pricing & on-time delivery.

We are offering disc brush. Disc brushes are available in following sizes dia 100, 110, 125, 150, 200, 250. In following grits:180, 120, 240, 320sutable for all deburring machines.

We are offering honing brushes. Galvanized double-stem with single spiral. Indispensable brushes for inside cleaning of arbor holes and difficult finishing jobs on non-ferrous metal and hydraulic castings. Suitable especially for deburring cross drillings, steering parts, o-rings and cylindrical boreholes in many other workpieces. Outstanding cost-effctive performance. specifications: available size: from 6 mmdiameter to 50 mm diabrushes length from 10 mm to 150 mmgrits available: 80, 120, 180, 240, 320, 500 applications: cross hole deburringedge blendingcleaning threadsedge radiusingcrankcase bores2 stroke enginesvalve bore bodies available sizes: from 6 mm diameter to 50 mm diabrushes length from 10 mm to 150 mmgrits available: 80, 120, 180, 240, 320, 500

We are highly acclaimed in the market for offering unmatched quality Food Processing Brushes. We use the most advanced German technology to make the Food Processing Brushes. These Food Processing Brushes are apt for washing gherkin, vegetable, fruits, etc., in the food processing industry as that are made of food grade bristles. We also supply customized Food Processing Brushes to the clients as per their requirements. Attributes :

• Robust make
• Sturdiness
• Long life
• Easy to use

Clients can avail premium quality End Brushes from us. The End Brushes are commonly used for proper finishing by omitting the surface dimensional changes. These End Brushes have a wide usage in the automobile and hydraulic industry for cleaning machinery end parts along with deburring pump casings, steering-gear cases, control pistons, moulds, arbor holes, cylindrical parts, etc. we supply quality tested End Brushes to the clients in varied specifications at fair prices. Specifications :

• Diameter : 5 mm to 50 mm
• Bristle length : from 4 to 30mm
• Grits : 80, 120, 180, 240, 320, 500

Minimum Order Quantity : 10 units

Clients can avail optimum quality and durable Wheel Brush from us. The entire range of Wheel Brush is perfect for use on machine parts, steel gears, hardened alloys, powder metal components, saw cut extrusions, etc. We supply sturdy, long life and smoothly working Wheel Brushes. These Wheel Brushes can be availed in different specifications as per the requirements. Applications

• Steel Gears
• Machine Parts
• Stainless Steel
• Hardened Alloys
• Saw Cut Extrusions
• Powder Metal Components

Specifications :

• Diameter : 4, 5", 6, 8, 10
• Thickness : 10 mm to 50 mm
• Grits : 80, 120, 180, 240, 320, 500

The PULPER BRUSHES are mainly used in fruit processing units. where they use it for extracting the pulp of the fruits like mango, Pineapple, Guava and etc.our brushes are made of Food Grade plastic or Timber base and nylon Bristles. These brushes ate available in different sizes and are widely used by all major food processing industries.

Owing to the rich industrial experience and expertise of the team, we bring forth a fine assortment of PCB Brush. We use cutting-edge technology and high quality material to manufacture the PCB Brushes. The PCB Brushes offered by us are stringently tested and are assured to be durable, rigid, lightweight and easy to use. We also supply PCB Brushes in customized specifications at competitive prices. We are offering a wide range of PCB NYLON BRUSH to our valuable customers. Our PCB Nylon Brush are Made of 100%dupont Filaments. These Brushes are Available in Following Sizes :

• Dia 125*450*50.8mm Grits : 240, 120, 320, 500.
• Dia 125*610*50.8mm Grits : 240, 120, 320, 500.
• Dia 105*450*35mm Grits : 240, 120, 320, 500.
• Dia 105*610*35mm Grits : 240, 120, 320, 500.

Note : Custome Size Brushes Can also Be Made.

we offer deburring power brushes are available in several sizes and shapes. We carry wheel, end, tube and disk brushes. The right brush will depend on the application. These brushes are used for when deburring action is needed on flat plane surfaces, often on larger surfaces and end brushes are used to reach into smaller area.

JPN Brush House provides a huge range of Deburring Brush. Deburring Brushes are ideal for use on flat surfaces. Our range of Deburring Brush includes wheel, end, tube and disk brushes. Clients can avail the Deburring Brush from us in different sizes, shapes and specifications at the market leading prices. Highlights :

• Durable
• Robust make
• Easy reach to smaller areas
• Reasonably priced

Minimum Order Quantity : 4 units

Our company shares glorious credentials with the reliable Manufacturers, Suppliers and Exporters of Twisted Wire Brushes. Our Twisted Wire Brushes are extensively used in cross hole deburring, edge blending, edge radiusing, etc. In order to meet the bulk and urgent requirements of the buyers, we maintain a large stock of the Wire Brushes in our state-of-the-art warehouse. One can obtain the Brushes at competitive rates from us.

 

Application :

• Cross Hole Deburring
• Edge Blending
• Edge Radiusing
• Cam Bores
• Pistons
• Crankcase Bores
• 2 Stroke Engines
• Valve Bodies
• Pistons Cleaning Threads

Available size : from 6mm diameter to 50mm dia brushes length from 10mm to 150mm.
GRITS : 80, 120, 180, 240, 320, 500.

We are known for offering a wide range of premium quality Abrasive Disc Brush. The Abrasive Disc Brush offered by us is used for several applications like edge radiusing, improving texture characteristics on machined or ground surfaces and deburring flat machine surfaces, punched components and face-milled castings or forgings. The entire range of Abrasive Disc Brush is known for its durability, sturdiness and usefulness. Used For :

• Edge radiusing
• Improving texture characteristics on machined or ground surfaces
• Deburring flat surfaces on machines
• Deburring punched components
• Deburring face-milled castings or forgings

Available Types : Tufted Style (light deburring) Minimum Order Quantity : 4 units Our brushes are maed with 100% DUPONT TYNEX A filaments. Vast product range variation in filament material, #80 to# 320 std grits, coarse grits and fine grits, size, and shapes to cater each individual need separately Adaptable to all standard machining centers viz. VMC, HMC, FMC, CNC, planetary heads deburring m/c and Robots & Automation to suit the standard holders. General Features of Disc Brush

• DISC brushes are particularly suitable for DeBurring, burr generated by milling cutters, fine blanked products on any flat and sizable recessed components made from any metals, non-metals and composite.
• Cost effective and ideal for custom designed machines
• Remove or reduce the Milling marks.

Disc Brush Specification

• Diameter : All Disc Brush are available from 50mm to 300mm diameter as standard. Higher diameter is also available as per customer and job requirement
• GRITS : available from 36, 46, 60, 80, 120, 180, 240, 320, 400, 500 and 1000

Working Height : 10 TO 30MM Filament Dia. : It varies Depending upon grit and filament type . Normal standard grits of Silicon carbide are available in 0.5 to 1.4 mm thickness as a Standard & Non Standard on Request. Applications

• Removing burrs, blending tool marks and finishing flat machined surfaces
• Punched Components, where heavy burrs are generated
• DeBurring face milled surfaces and DeBurring parts that have specific surface finish requirements
  • Stamping
  • Deburring Fineblanked Steel Parts

Applications of Disc Brushes Flat Surface Deburring

• Deburring flat surfaces on machined components
• Improving texture characteristics on machined or ground surfaces
• Deburring face-milled castings or forgings
• Blending tool marks after machining or grinding

Disc Brushes are Available in Following Diameters : 50, 100, 125, 150, 200, 250. Filaments are Made Of : 100% DUPONT TYNEX A

We are bracketed among the reputed Manufacturers, Suppliers and Exporters of Wide Face Brushes. The Wide Face Brushes offered by us come in different diameters like 4”, 5’’, 6”, 8”10”. Our Wide Face Brushes are used for applications like scrubbing, brightening, copper surface cleaning, etc. We have all the in-house facilities to deliver bulk orders of the Brushes within the promised timeframe. Buyers can obtain the Brushes at reasonable rates.

 

Applications :

• Scrubbing
• Brightening
• Copper Surface Cleaning
• Deburring Holes
• Roughening Phenolic

 

Available size : from 4”, 5:, 6”, 8”10” diameter length from 10mm to
2000mm.GRITS : 80, 120, 180, 240, 320, 500.

We are the high standing Manufacturer, Exporter and Supplier of Steel Plant Brushes from Bangalore. The Steel Plant Brushes offered by us, are precisely contrived from finest synthetic fibers and other allied material, using Proven High-Tech Imported European Machines. Known to exhibit excellent mechanical strength and resistivity to abrasion & corrosion, these Brushes are globally accessible from us in ample of specifications & finishes. For pocket-easy prices, turn to us!

 

Features :

• Soft bristles
• Light weight
• Easy handling
• Fine finish

Application :

• Remove pickling residue in strip production , Removing mill abrasion
• Applying alkaline, cold detergent, mineralized water in degreasing line
• Brushing before and after electrolytic processing in ECL line
• Supporting cylinders for decaling process
• Removing and cleaning oxide in aluminum processing
• Brushing Door, sheets for various use age
• Brushing Stainless steel to obtain perfect finish

 
Techniqual Specification :

• The Base of Brush Segment is Completely Made up of Pure High Density Polyethylene (HDPE) Material along with Cast Iron end flange or without flange
• Bristles of Brush Segment are Nylon or Silicon Abrasive that runs on high temperature and resists high heat. 
• Brush Segment and Roller is Manufacture as per Customer OEM drawings and Specifications.

Competitive Edge :

• The Brush roller is manufactured on Proven High-Tech Imported European Machine .For accurate Quality Results
• Uniform surface is obtain be special imported Grinding/Trimming Machine
• Guaranteed High Density Pattern which Gives Immense Result on Surface

We offer excellent quality Honing Brush to the clients spread all across the world. The Honing Brushes offered by us comes with galvanized double-stem with single spiral. Honing Brushes are perfect for a proper cleaning of the interiors of arbor holes. Also, Honing Brush is ideal for reliable finishing of non-ferrous metal and hydraulic castings. These Honing Brushes are also used for deburring steering parts, o-rings, cross drillings and cylindrical boreholes. Used For :

• Edge radiusing
• Cross hole deburring
• Cleaning threads
• Edge blending
• 2 stroke engines
• Crankcase bores
• Valve bore bodies

Specifications :

• Diameter : 6 mm diameter to 50 mm
• Length : 10 mm to 150 mm
• Grits : 80, 120, 180, 240, 320, 500

Minimum Order Quantity : 10 units