Smashing is the process of compressing and removing the air from the folds and flattening of the Overall area of the Book-Blocks. Smashing strokes can be set in multiples to suit the compacting requirement for the desired rectangular shape. After the Smashing cycle the Book-Block is held firmly and Nipping operation follows for knocking out the excessive swell in the spine. Book-Block should be rectangular in shape and free from extreme gradients in the folded sewn area for quality & enhanced life of the BOOK. Smashing strokes (adjustable) from one to nine with two Nipping strokes, timing set in increments of 0.1 Seconds through the PLC (Programmable Logic Controller). The Smashing and Nipping hydraulic pressure is adjustable. Production speed of 600 to 700 Books (single Book of 30mm spine thickness) per hour can be achieved. Some of the other operator friendly features on the PLC are Manual & Semi-Auto option &Counter for number of Books processed. Dedicated Switches for Clamping (Smashing) and Nipping functions provided on the control Panel. Emergency and Recycle Push-buttons are located conveniently on the Top Cover. For operators safety: both the Push- Buttons need to be pressed simultaneously and Emergency Switch aborts the cycle immediately in case of an accident. Safety Curtain (sensor-based) is incorporated for operators protection. The Smashing (Clamping) Nipping operation is instantly aborted on breach of the Safety Curtain. This feature is a foolproof measure to protect the operator from any accident etc.

Hydraulic Press for handling of WASTE-Paper, Corrugated Boards, Stationery (sharedded Un - sheddded). Plasti Flims etc. Hydraulic device, compact in design, ideally suited for the pressing of said WASTE and manually bundling the presssed bales for saving in storage space, transportation and manpower. Easy simple operation of handling waste by sinlgle person. The bales ensure higher yield price. Conveniently located Control Panel. One time activation of Switch for downward & upward movement of pressing platen. The pressing function can be aborted for refilling fresh Waste material. Tight wrappping of compressed waste and bound with Cords Plastic straps Hoops (wire) for ease of - handling for onwards stacking trasportation, two (Front) Strapping Grooves for bundling incorporated. Power saving Device (built-in), the motor switches off automatically on attaining the set pressure or in Reset position of the Moving Platen. The downward movement stops automatically on attainig the set pressure. Front loanding of paper waste- material. Loading Area Widened by 22% over earlier models. Convenient removal of bales with the help of unique design - Ejector Device for removing the bale. Spring Loaded Switch for up downward travel in Manual Mode. The travel stops automatically with the help of the limit Switch in reset (loading) position.

A process of reducingknocking out the SWELL in the spine of thread-sewn Book-Blocks or gathered folded-forms (signatures) being prepared for Hard-Case or Soft Cover Perfect Binding. Ensures the Book-Blocks are rectangular in shape and free from extreme gradients in the foldedsewn area for quality and enhanced life of the BOOK. PLC based Control Panel for optimum reliability and simplified diagnostics. Other operator friendly features are: Selection of Manual or Semi-auto mode; Counter for number of Book-blocks processed; Dedicated switches for Clamping and Nipping functions in Manual Mode. Emergency Switch & Recycle Push Buttons are conveniently located on the Top Cover. Emergency Switch aborts the cycle and resets the machine to starting position. For operators safety: both the Push Buttons are required to be pressed simultaneously for initiating the cycle; an intricate Safety Device (sensor based) is incorporated as additional protection in case of malfunction of Recycle Switches or the operators hands are in the way of the clamping area. For uninterrupted production, Support Device is provided to ensure the book-blocks are held upright and are not allowed to sag to avoid triggering of Sensors during processing. The high Speed blowerexhaust fan ensures the ambient temperature in the Power Pack Area is maintained. The latest Hydraulic Technology & Controls make it possible to process 700800 books (single bookblock upto 30mm spine thickness) per hour. Castors provided for maximum space utilisation & mobility.

Smashing is the process of compressing and removing the air from the folds and flattening of the Overall area of the Book-Blocks. Smashing strokes can be set in multiples to suit the compacting requirement for the desired rectangular shape. After the Smashing cycle the Book-Block is held firmly and Nipping operation follows for knocking out the excessive swell in the spine. Book-Block should be rectangular in shape and free from extreme gradients in the folded sewn area for quality & enhanced life of the BOOK. Smashing strokes (adjustable) from one to nine with two Nipping strokes, timing set in increments of 0.1 Seconds through the PLC (Programmable Logic Controller). The Smashing and Nipping hydraulic pressure is adjustable. Production speed of 600 to 700 Books (single Book of 30mm spine thickness) per hour can be achieved. Some of the other operator friendly features on the PLC are Manual & Semi-Auto option &Counter for number of Books processed. Dedicated Switches for Clamping (Smashing) and Nipping functions provided on the control Panel. Emergency and Recycle Push-buttons are located conveniently on the Top Cover. For operators safety: both the Push- Buttons need to be pressed simultaneously and Emergency Switch aborts the cycle immediately in case of an accident. Safety Curtain (sensor-based) is incorporated for operators protection. The Smashing (Clamping) Nipping operation is instantly aborted on breach of the Safety Curtain. This feature is a foolproof measure to protect the operator from any accident etc.

Hydraulic Press for handling of WASTE-Paper, Corrugated Boards, Stationery (sharedded Un - sheddded). Plasti Flims etc. Hydraulic device, compact in design, ideally suited for the pressing of said WASTE and manually bundling the presssed bales for saving in storage space, transportation and manpower. Easy simple operation of handling waste by sinlgle person. The bales ensure higher yield price. Conveniently located Control Panel. One time activation of Switch for downward & upward movement of pressing platen. The pressing function can be aborted for refilling fresh Waste material. Tight wrappping of compressed waste and bound with Cords Plastic straps Hoops (wire) for ease of - handling for onwards stacking trasportation, two (Front) Strapping Grooves for bundling incorporated. Power saving Device (built-in), the motor switches off automatically on attaining the set pressure or in Reset position of the Moving Platen. The downward movement stops automatically on attainig the set pressure. Front loanding of paper waste- material. Loading Area Widened by 22% over earlier models. Convenient removal of bales with the help of unique design - Ejector Device for removing the bale. Spring Loaded Switch for up downward travel in Manual Mode. The travel stops automatically with the help of the limit Switch in reset (loading) position.

A process of reducingknocking out the SWELL in the spine of thread-sewn Book-Blocks or gathered folded-forms (signatures) being prepared for Hard-Case or Soft Cover Perfect Binding. Ensures the Book-Blocks are rectangular in shape and free from extreme gradients in the foldedsewn area for quality and enhanced life of the BOOK. PLC based Control Panel for optimum reliability and simplified diagnostics. Other operator friendly features are: Selection of Manual or Semi-auto mode; Counter for number of Book-blocks processed; Dedicated switches for Clamping and Nipping functions in Manual Mode. Emergency Switch & Recycle Push Buttons are conveniently located on the Top Cover. Emergency Switch aborts the cycle and resets the machine to starting position. For operators safety: both the Push Buttons are required to be pressed simultaneously for initiating the cycle; an intricate Safety Device (sensor based) is incorporated as additional protection in case of malfunction of Recycle Switches or the operators hands are in the way of the clamping area. For uninterrupted production, Support Device is provided to ensure the book-blocks are held upright and are not allowed to sag to avoid triggering of Sensors during processing. The high Speed blowerexhaust fan ensures the ambient temperature in the Power Pack Area is maintained. The latest Hydraulic Technology & Controls make it possible to process 700800 books (single bookblock upto 30mm spine thickness) per hour. Castors provided for maximum space utilisation & mobility.