Our Products
Flow Meters
2 Products availableTesting Equipment
2 Products availableIndustrial & Engineering Products
1 Products availableFlanges
1 Products availableFire Fighting & Protection
1 Products availableProcess Control Systems & Equipment
1 Products availableSensors
1 Products availableLeading Manufacturer, Supplier & Retailer of Reflex and Transparent type Level Gauge, Side Mounted Tubular type Level Gauge, Board Level Gauge, TEMPWELL make Gas Filled / Vapor Filled / Hg in Steel Filled Temperature gauges and Denvar make Tyre Pressure Gauge.
These are Designed specially to meet most critical requirements of Petrochemical, Fertilizer, Pharmaceutical & Chemical Industries Involving inflammable toxic, High Pressure, High temperature liquids.
In case of Reflex Indicator Inner surface of glass has reflecting Prisms. Liquid Levels shows black in contrast to mirror like surface above.
In case of transparent indicator. The liquid enters the chamber on either side of which are a pair of heavy duty glasses, which permits observations of level, colour and clarity of liquid. MOC of Valve: SS 316 / SS 304 / C S / MS, PP & PTFE / TFE / PFA coated for corrosive application. Mica shield available optional.
Available Glasses | Toughened Borosilicate / Pyrex / Klinger / Maxos |
Nuts & Bolts | CS / ASTM A 194 & 193 / SS |
Gaskets | CAF / Metallic Graphite/ Pyrex / Klinger |
Isolation Valve | In built Stright / Off set |
Vent & Drain | Plug / Valve |
Max. Op. Temp | 120°C to 400°C |
Max. Op Pressure | 20 Kg/cm2 |
Connection | Flanged / Screwed |
Body & cover plate | SS 316 / SS 304 / C S / MS, PP & PTFE / TFE / PFA coated for corrosive application |
Valve / Body trim | SS 316 / SS 304 / C S / , MS, PP & PTFE / TFE / PFA coated for corrosive application |
Mounting | Side / Vertical / RHS / LHS |
Vent and Drain | Plug / Valve |
It consists of borosilicate glass tube (of 16/19/25 mm OD) housed in box type C channel section to prevent breakage. Scales are provided on the Channel to indicate level. Teflon gaskets provided for superior sealing.
Wide range of material of body/wetted parts available as per the process requirement. Max Op. Pressure vacuum to up to 6 kg/cm2, Centre to centre distances available from 300 MM to up to 3000 mm.
Isolation / vent & drain valve can be provided.
Glass tubes | Borosilicate 16mm / 19mm / 25mm |
Nuts & Bolts | CS/ ASTM A 194 & 193/, SS |
Materials of all wetted parts (Body) | C.S / S.S 304 / S.S 304L / S.S 316 / S.S. 316L |
Lining (optional) | PTFE / PFA / TFE (0.8 TO 1mm thick) |
Material of protection channel | MS Powder coated / Stainless steel |
Isolation Valve | Optional |
Vent & Drain | Plug / Valve |
Max. Op. Temp | 120°C to 400°C |
Max. Op Pressure | 6 Kg/cm2 to full vaccum |
Connection | Flanged as per ASA & BS standards / Screwed |
Mounting | Side / Vertical / RHS / LHS |
It is an open scale target reading type level gauging device Suitable for all types of non-pressurised tanks like cone roof, flat roof, overhead storage tanks. It works on the principle of buoyancy, consists of printed multi colored aluminum scales, which are mounted on the side of the tank With adjustable brackets.
As the liquid rises in the tank, the large float fitted in the tank also goes up, in turn moving the pointer on the scale. The float is connected to the pointer with wire rope which glides over almost frictionless nylon rollers, thereby ensuring a trouble free operation.
Float & wetted parts Available in various MOC such as SS 304, SS316, Mild Steel, PP, etc. Magnetic vapor seal arrangement can be provided for hazardous fluids .
This type of Level Gauges are suitable for:
- Over Ground / Overhead storage tanks- Water, Fire water and DM water, petroleum storage tanks- All non-hazardous and non-pressurised tank applications
Float Size | 375 mm diameter x80 mm height. Argon welded self centered type. |
Float & Wire rope materials | SS 304 / SS 316 / PP |
Pulleys | 2 Nos specially designed for smooth rotation |
Pulley Material | Frictionless PVC / Nylon / SS 304 / SS 316 |
Pulley enclosure | Caste Aluminium / SS 304. |
Mounting | Top of the tank |
Connection | Flanged to ASA, BS and DIN Standard or Screwed |
Graduation | in MM / Inch / Feet x Numeric red x Graduation Black |
Scale Board | Aluminium Powder Coated or SS 304. 100mm / 150mm x 1 meter long |
Scale Board T Bracket | Mild steel at every 1 scale length |
Inner and outer telescopic pipe assembly | MS powder coated / SS |
Pointer | C.S. Painted |
Max. operating temperature | 120°C for SS |
The instruments are designed for quick response to any subtle change in temperature and are fitted with bimetallic compensating link to cater for case temperature compensation. These gauges are used in Hazardous & corrosive environment and application, in the industries like Chemical , Processing, Petroleum Refining, Petro-Chemicals, Fertilizers, Pharmaceuticals & Bulk Drugetc.wherepowerlessmechanical instruments are used as back up.
Dial Size | 75mm, 100mm, 150mm and 250mm |
Casing | * Pressed S.S. 304 Case and Snap action Bayonet Bezel, weather proof as per IP65 * Die cast aluminum screwed case with inner Bezel of A.B.S. plastic Weatherproof as per IP55 or IP65 |
Window | Plain Glass / Toughened Glass |
Pointer | Micro Zero Adj. / Balanced Aluminum |
Dial | Aluminum, Black graduation on white background. |
Stem/Bulb Material | MS / S.S. 304 / S.S. 316. |
Stem/Bulb Size | 10 / 12 & 16 mm. (Standard 12 mm) |
Stem Length | From 50 to 2000 mm (standard 300 mm) |
Capillary Material | Cold drawn Steel Capillary with Copper / S.S. 304 / S.S. 316 / PVC on steel Amour. |
Capillary Length | up to 20meters (Standard 3 meters). |
Connection | 3/8", 1/2" 3/4" BSP, BSPT, NPT Adjustable Gland type in matching material. |
Range | From -30°C to upto +650°C in standard ranges. |
Accuracy | ±1% of the range |
Over Range Protection | 20% of the range span. |
Optional Fitments | Glycerin Filling, Capillary Temperature compensation system., Anti-Vibration Springs, External Zero-Adjustment Facility, Magnetic Snap action electrical contacts, Max. reading pointers. |
These gauges are most suitable in Automotive tyre pressure measurements .
Size | 50MM, 65MM & 100 MM. |
Accuracy | ± 2 % F.S.D ( ±1% FSD Optional) |
Range | 0-60 PSI, 0-100 PSI, 0-150 PSI, 0-200 PSI & 0-230 PSI |
Over range protection | 20% or as per class I / II of IS 3624 |
Dial | Aluminum ,Colour marked 0- 100 PSI Yellow, 100 to 150 PSI Green, Above 150 PSI Red |
Casing | M S Pressed steel powder coated / Rubber graded |
Connection | Push & Pull type Air chuck |
Types | Stem Type / Hosepipe type. |
Window | Plain Glass |
Optional Fitments | Scale marking in Kpa, Kg/cm2, Bar Etc. Customized Dial design & colour , Rubber braided hosepipe. |
These are the gauges where the diaphragm is directly linked by shaft to the movement . These gauges are most suitable to measure Low Pressure from -500 MMWC to Up to + 6000 MMWC.
Schaffer Gauges are suitable for Pharmaceutical, Chemical, Petrochemical, Oil & Gas, Refinery, Paper & Pulp, Breweries, Food & Beverages, Cement Industries, etc
Size | 100 MM & 150 mm. |
Accuracy | ±1.6 % F.S.D |
Range | From -500 TO UP TO + 6000 MMWC ( All Std. Ranges) |
Over range protection | 20% or as per class I / II of IS 3624 |
Dial | Aluminum Black Graduation on White Background. |
Casing | Die cast aluminum screwed case with inner Bezel, Weatherproof as per IP55 or IP65 |
Mounting | Direct mounting Bottom entry. |
Connection | 3/8”, 1/2" B.S.P. or N.P.T (M) andOr Flanged as per BS / ASA /DIN Std. |
Fitments | Zero adjustment pointer. |
Diaphragm & Bottom Chamber | Stainless Steel 316. |
Movements | Leaded Brass / Stainless Steel 304. |
Window | Plain Glass |
Temperature Limits | Max 150°C for Stainless Steel and 125°C for Nonferrous. |
Optional Fitments | Toughened or Acrylic glass, Gauge Saver, Siphon, Gauge Cock, Scale IN Mbar / MMHg / In.Hg |
Dial Size | 100mm & 150mm. |
Accuracy | ± 1.6% of full scale value. |
Contacts | Externally adjustable Single / Double (NO / NC) magnetic snap action type. |
Voltage | 380 -V A/C at 50Hz 220-V A/C |
Optional Fitments | Gauge Saver, Syphon, Gauge Cock, Dampers etc. |
Diaphragm Sealed Type Pressure Gauges are used to measure process pressures involving Corrosive sluries or Viscous Fluids to protect the instruments from Clog, Damage or Corrosion to the pressure element. (Gauge Specifications and Ranges same as Weatherproof Industrial and All S.S. Waterproof Gauges)
Accuracy |
±1% or 1.5% F.S.D. |
Connections | 1/4" , 3/8”, 1/2”BSP / NPT (M) , M 20 X 1.5 threaded & flanged as per A.S.A., B.S. & DIN standards |
Diaphragm Units | * Sandwich type bolted diaphragm sealed unit, * Argon arc welded diaphragm sealed unit , * Distance capillary type diaphragm sealed unit. |
Diaphragm Materials | S.S. 316L, S.S. 316, Monel, Hastalloy, Tantalum (PTFE / PVDF Lining / Coating can be provided). |
Top and Bottom Chambers | S.S. 304, S.S. 316, Monel, M.S. (PTFE / PVDF coating, lining can also be provided). |
Filling liquid | Silicon 350 or Hythem 600. |
Optional Fitments | Various grade of filling liquid to suit the process requirements. Toughened / Acrylic window glass, Electrical Magnetic snap action contacts, Glycerin Filling, Max. reading pointer, shphone , Gauge cock etc. |
Dial Size | 63mm and 100mm. |
Accuracy | ± 2% F.S.D. (± 1% optional) |
Range | All Std. ranges Up to 40 kg/cm2 |
Over range protection | 20% or as per class II of IS 3624. |
Dial | Aluminium Black Graduation on White Background |
Casing | Stainless Steel 304 weatherproof IP 65 |
Bourdon & Socket | Stainless Steel 316L or 304 |
Diaphragm Element | Stainless Steel 316L |
Diaphragm Unit | Stainless Steel 316L or 304 |
Connection | 1/4", 3/8” BSP-NPT (M) or 50mm Triclover. |
Optional Fitments | Glycerine Filling, Toughened / Acrylic window glass, Various grade of filling liquid to suit the process. |
These gauges are used in the industries like Chemical, Processing, Petroleum Refining, Petro-Chemicals, Fertilizers, Pharmaceuticals & Bulk Drug, Food Processing and Offshore Application.
Dial Size | 65mm, 100mm, 150mm and 250mm. |
Accuracy | ±1% F.S.D. (±0.5 optional) ±2% for 65mm dial |
Range | From -760MMHg (Vacuum)to up to +600 kg/cm2( All Std. Ranges) |
Over range protection | 30% or as per class I / II of IS 3624 |
Dial | Aluminium Black Graduation on White Background. |
Casing | Die cast aluminium screwed case with inner Bezel of A.B.S. plastic or aluminium, Weatherproof as per IP55 or IP65 |
Mounting | Direct mounting Bottom or Back entry, Back entry bracket mounting. |
Connection | 3/8”, 1/2" B.S.P. or N.P.T. , M 20 X 1.5 (M) and other |
Fitments | Zero adjustment pointer and Blowout safety disc. |
Bourdon & Socket | Stainless Steel 316L / Brass. |
Movements | Stainless Steel 304/Leaded Brass. |
Joints | For Stainless Steel - Argon arc welded, for nonferrous hard soldered. Heat treated stress relieved |
Temperature Limits | Max 270°C for Stainless Steel and 125°C for Nonferrous. |
Optional Fitments | Toughened or Acrylic glass, Electrical Magnetic single or double snap action Contacts, Glycerine filling, Max. reading pointer, diaphragm units, Gauge Saver, Syphon, Gauge Cock, Dampers etc. |
Dial Size | 65mm, 80mm, 100mm and 150mm , 250 mm |
Accuracy | ±1% F.S.D. (± 0.5% Optional), ±2% for 65mm dial. |
Range | From -760MMHg (Vacuum)to up to +600 kg/cm2( All Std. Ranges) |
Over range protection | 30% or as per class I / II of IS 3624. |
Dial | Aluminium, Black graduation on white background. |
Casing | Pressed SS304 Case and Snap action Bayonet Bezel, weatherproof as per IP65. |
Mounting | Direct mounting bottom or backentry, Back entry panel mounting. |
Connection | 3/8”, 1/2" B.S.P. or N.P.T. , M 20 X 1.5 (M) and other |
Bourdon & Socket | Stainless Steel 316L |
Movement | Stainless Steel 304 |
Fitments | Zero Adjustment Pointer and Blowout Safety Disc |
Joints | Argon Arc welded. Heat treated stress relieved |
Max. Temperature Limit | 270°C Max. |
Optional Fitments | Toughened window glass, Electrical Magnetic NO/NC snap action contacts, Gauge Saver,Glycerine filling, Max. reading pointer etc |
Special Application Gauges:
Oxygen Gauge :All sizes are available for oxygen service with appropriate marking. These gauges are degreased with suitable degreasing agent.
Acetylene Gauge :All sizes are available for acetylene with appropriate marking.
Ammonia Gauge :These gauges are available in 68mm / 100mm size with concentric temperature scale with standard thread connections of 1/4" N.P.T. or 3/8" B.S.P. The Bourdon and Socket are made of S.S. 304
Freon Gauge :These gauges are available in 68mm & 100mm with concentric temperature scale for R12 or R22 service marked in red.
Dial Size | 40mm, 50mm, 63mm, 100mm, 150mm and 250mm |
Accuracy | ± 2% between 10% to 90% of the scale. 3% for rest of the scale (3% - 2% - 3%) |
Range | From -760MMHg (Vacuum)to up to +600 kg/cm2( All Std. Ranges) |
Over range protection | 20% or as per class II of IS 3624 |
Case & benzel | Drawn Steel Stove enameled black or Powder coated / S.S.304 |
Connection | 1/8" ,1/4” and 3/8" B.S.P. or N.P.T. (M) |
Bourden & Socket | Brass / S.S.304 |
Movements | Leaded Brass |
Joints | Hard Soldered / Silver Brazed |
Max. Temperature Limit | 95°C Max. |
Optional Fitments | Max. reading pointer, diaphragm seal units, Gauge Saver, Syphon, Gauge Cock, Dampers etc |