Class B Lightning Surge Protectors are highly inevitable part of any AC Power Electrical Installations. Lightning surge protectors are designed to protect low-voltage systems against high surge currents and over-voltage in cases triggered by indirect or direct lightning strikes.   As per RDSO/ SPN/ TC/98/2011 or latest, the Class B Surge Protector are installed in the business or housing environment to keep them safe and sound for a longer period of time. JMV is known to be a leading manufacturer and supplier offering a superior quality Type I Lightning Surge Protectors that are based on latest technology and made up of superior quality raw material that work as all in one protection solution of any kind of surges fittings. We have been offering high end Lightning SPD complying IEC 61643-1 providing a high level of protection against the lightning impulse.   The lightning surges are caused by thunderstorms, direct or close lightning strikes into its immediate surroundings or into the conductive system entering the structure (low voltage power supply). The power wiring along with the signal cables produces electrostatic discharges to get them transmitted to the electronic equipment. Whenever the voltage stroke comes, it gets arrested by the Type I Surge protectors and further transmits to the ground.   The Lightning Surge Suppression Devices are installed inside the main distribution box and no extra power supply is needed to operate the lightning surge protector which have been fitted with a mechanical fault indicator, adding effective protection to electrical plants via the pre-counter sector.   Further Class B SPD are classified according to the wiring system in industries and houses. At home, there is a single phase wiring system according to the load. In industries, the load is high as we use heavy duty machines so there is 3-phase wiring system.  

Class C Switching Surge Protection Devices are more refined protection devices designed specifically to protect the sensitive equipments against damaging switching surges. The unwanted power surges are basically spikes in voltage which are very brief, usually lasting millionths of a second.  Surges can fluctuate in duration and magnitude, rising and falling from a few hundred volts to several thousand volts. A RDSO comply - RDSO/ SPN/ TC/98/2011 or latest and RDSO/SPN/156/2012 version switching surge protection is an electrical device commonly used to protect Electrical, Electronic instruments or components from power surges.  Switching Surges arise due to switching operations are caused by: Switching off inductive loads (e.g. transformer, coils, motors) Ignition and interruption of electric arcs (e.g. arc welding devices) Tipping of fuses Type 2 Surge Protective Devices create a link between the conductor of electrical equipment and the ground that stops the transient over voltages on equipment. Type 2 surge protector is the best way to keep every kind of voltage surges away from low-voltage switching to make sure the complete protection of secondary panel. Class C SPD is a voltage-surge arrester which is used for the protection of equipments like UPS, MCB DB’s CNC Machine/ drives etc.  Switching surge protector is a complete Protection made up of superior quality raw material with an extremely non-linear quality. The most striking features of this device are its extremely short response time, a low protection level and a high current distraction capacity, coupled with a long functional life. Class C SPDs are installed at equipment level to save your machine panel. Further Class C is classified according to the wiring system in industries and houses. At home, there is a single phase wiring system according to the load. In industries, load is high as we use heavy duty machines so there is 3-phase wiring system. 

• Max. continuous operating voltage (Uc)    600 V DC
• Nominal Discharge Current (In)   20kA
• Maximum Discharge Current (Imax) 8/20 µs   40 kA
• fault indication   Green & red visual indicator
• voltage protection level   ≤ 3 kV
• Response time  < 25ns
• Degree of Protection   IP20
• Temperature Range   - 40 C ….+ 80 C
• Standards    IEC 61643-31

RJ45 Surge Protector is a network signal lightning arrester ensuring the reliable operation of Local and Wide Area Networks. We are offering protection for LAN interface technologies such as Ethernet and protection for environments including Integrated Services Digital Network (ISDN), T1, Data Distribution Service (DDS), analog dial up modems, faxes and others.  Based on the MOV technology that guards sensitive data networks against lightning induced surges, AC power interference, electrostatic discharge and ground sphere energies. JMV’s BDL-RJ45 surge protector is a cable that connects from the router to the computer. The LAN surge protector is manufactured using raw materials of the highest grade that are available in the market. Owing to its impeccable functionally in providing protection against electrical transients and has an exceptionally long life.  BDL-RJ45 Ethernet Surge Protector are especially utilized for a variety of computer networks like token-ring network, Ethernet network (LAN), PoE (Power over Ethernet) and various lightning-proof areas. This protection device is developed for protecting equipment's that are prone to damage by the line inductance or over voltage of the earth. 

BDL-RJ45 Series Ethernet/ Network Switch Surge Protector is a cost-effective solution designed to protect the LAN/ Ethernet Network/ switches from damaging electrostatic discharge and voltage surges. It is an inbuilt surge protection device manufactured using raw materials of the highest grade, allowing the safe data transfer without loss. Ethernet/ Network Switch Surge Protector is available in the range of 4, 8, 12, 16, 24 IN/ OUT ports. This Surge Protection Device is a robust solution and provides an additional layer of protection to the network. The need of additional Ethernet/ Network Switch Surge Protection Devices are arises when the ground potential surge generated due to a nearby lightning strike to ground, probably the greatest threat of damage to the largest number of networks. Direct strike to a building housing a LAN, a severe threat to a relatively few. Mains power supply transients due to lightning strikes to power lines, supply switching and faults, a moderate threat to an intermediate number of LANs. Surge Protector is especially utilized for a variety of computer networks like token-ring network, Ethernet network (LAN), POE (Power over Ethernet) and various lightning-proof areas. It is widely used in server equipments, router, working stations (intranet) HUB and board band. 

BDL-RJ45 Series Ethernet/ Network Switch Surge Arrester is a cost-effective solution designed to protect the LAN/ Ethernet Network/ switches from damaging electrostatic discharge and voltage surges. It is an inbuilt surge protection device manufactured using raw materials of the highest grade, allowing the safe data transfer without loss. Ethernet/ Network Switch Surge Arrester is available in the range of 4, 8, 12, 16, 24 IN/ OUT ports. This Surge Protection Device is a robust solution and provides an additional layer of protection to the network.