The Arc stability is excellent on account of sufficient high open circuit voltage. This will also enable the use of stainless steel and type of electrodes. All models are manufactured in stepless regulator current system to obtain optimum welding efficiency at minimum loss of current. POWER FACTORS CAPACITORS:Often the electric supply authority is particular about power factor of equipments installed in their area. As transformer type welding machines have inherently low power factor, the use of power capacitor is recommended. Suggested size is mentioned with specification and will be supplied at extra cost if desired.

JK Welding Rectifies are designed and manufactured for excellent welding Characteristics. A three phase double wound transformer, a well designed transductor and a three-phase full wave silicon rectifier bridge with filter ensure a smooth and steady are minimum spatter and excellent weld bead shape.

High 80% Volt OCV ensure easy arc striking for low hydrogen electrodes.Special surge suppressor device protect the control circuitry from voltage spikes.Since the rectifiers are static machines with no moving parts negligible maintenance are required.

JK rectifiers can be used for MMA welding, TIC welding, SAW Welding and Carbon arc gouging with wide range of 200-300-400 and 600 Amps.

APS-40/60/100 is an air plasma-arc cutting machine with inverter technology, which is suitable to cut stainless steel and all sorts of metal materials, especially for thin plate. This cutting process is truly perfect for people in many industries.

Basic Outfits

• Air plasma arc cutting power source
• Cutting torch
• Gas hose
• Earth clamp and earth lead
• Fast plug

Main Functions

• Portable. high efficiency, energy saving and noiseless.
• Outstanding cutting quality.
• Easy to arc-striking and stable performance.
• Cutting thickness: 0.1-8 mm.

 

We are specialist in manufacturing Heating Machine (Heater) which are used for making Stainless steel (SS) screw, Bolts, Nut and other products.

Our Machine consumes very low power. We built custom heating machines depending upon the diameter of the wires and the temperature required for the same. We built the machine for nuts and bolts up to 2 inch. of diameter of the wire and above.

For 2 mm to 8 mm Screw, heater is required for header machine, for bolt up to 17 mm heater is required for header machine, for 17 mm and above wire size forging is to be done for making Nuts and Bolts.

Our wide range of products are Heating Machine, ARC, BUTT, SPOT, SEAM, PROJECTION, TIG welding machine, MIG / CO2 welding machine and inverter welding machine.

We have a team of experienced staff for latest advancement in welding and heating technology and a set up to manufacture all types of Wlding machines and Heating Machines. We have best production team to arrange delivery in scheduled time. Our workshop is fully equipped with testing facility also.

 

 

JK Air Cooled & Oil Cooled Welding Transformers are manufactured in different capacities to suit requirements of all industries - both Repairs and production in small scale and big scale.

The looser in these transformers are kept to minimum by selecting and using best quality silicon stampings, copper wire and conductors.

The Arc stability is excellent on account of sufficient high open circuit voltage. This will also enable the use of stainless steel and type of electrodes.

All models are manufactured in stepless regulator current system to obtain optimum welding efficiency at minimum loss of current.

POWER FACTORS CAPACITORS:Often the electric supply authority is particular about power factor of equipments installed in their area. As transformer type welding machines have inherently low power factor, the use of power capacitor is recommended. Suggested size is mentioned with specification and will be supplied at extra cost if desired.

The Arc stability is excellent on account of sufficient high open circuit voltage. This will also enable the use of stainless steel and type of electrodes. All models are manufactured in stepless regulator current system to obtain optimum welding efficiency at minimum loss of current. POWER FACTORS CAPACITORS:Often the electric supply authority is particular about power factor of equipments installed in their area. As transformer type welding machines have inherently low power factor, the use of power capacitor is recommended. Suggested size is mentioned with specification and will be supplied at extra cost if desired.

JK Welding Rectifies are designed and manufactured for excellent welding Characteristics. A three phase double wound transformer, a well designed transductor and a three-phase full wave silicon rectifier bridge with filter ensure a smooth and steady are minimum spatter and excellent weld bead shape.

High 80% Volt OCV ensure easy arc striking for low hydrogen electrodes.Special surge suppressor device protect the control circuitry from voltage spikes.Since the rectifiers are static machines with no moving parts negligible maintenance are required.

JK rectifiers can be used for MMA welding, TIC welding, SAW Welding and Carbon arc gouging with wide range of 200-300-400 and 600 Amps.

APS-40/60/100 is an air plasma-arc cutting machine with inverter technology, which is suitable to cut stainless steel and all sorts of metal materials, especially for thin plate. This cutting process is truly perfect for people in many industries.

Basic Outfits

• Air plasma arc cutting power source
• Cutting torch
• Gas hose
• Earth clamp and earth lead
• Fast plug

Main Functions

• Portable. high efficiency, energy saving and noiseless.
• Outstanding cutting quality.
• Easy to arc-striking and stable performance.
• Cutting thickness: 0.1-8 mm.

 

We are specialist in manufacturing Heating Machine (Heater) which are used for making Stainless steel (SS) screw, Bolts, Nut and other products.

Our Machine consumes very low power. We built custom heating machines depending upon the diameter of the wires and the temperature required for the same. We built the machine for nuts and bolts up to 2 inch. of diameter of the wire and above.

For 2 mm to 8 mm Screw, heater is required for header machine, for bolt up to 17 mm heater is required for header machine, for 17 mm and above wire size forging is to be done for making Nuts and Bolts.

Our wide range of products are Heating Machine, ARC, BUTT, SPOT, SEAM, PROJECTION, TIG welding machine, MIG / CO2 welding machine and inverter welding machine.

We have a team of experienced staff for latest advancement in welding and heating technology and a set up to manufacture all types of Wlding machines and Heating Machines. We have best production team to arrange delivery in scheduled time. Our workshop is fully equipped with testing facility also.

 

 

JK Air Cooled & Oil Cooled Welding Transformers are manufactured in different capacities to suit requirements of all industries - both Repairs and production in small scale and big scale.

The looser in these transformers are kept to minimum by selecting and using best quality silicon stampings, copper wire and conductors.

The Arc stability is excellent on account of sufficient high open circuit voltage. This will also enable the use of stainless steel and type of electrodes.

All models are manufactured in stepless regulator current system to obtain optimum welding efficiency at minimum loss of current.

POWER FACTORS CAPACITORS:Often the electric supply authority is particular about power factor of equipments installed in their area. As transformer type welding machines have inherently low power factor, the use of power capacitor is recommended. Suggested size is mentioned with specification and will be supplied at extra cost if desired.