We are manufacturing Induced draft Cooling Tower in RCC Construction also both in Cross Flow and Counter Flow design. Since the structure of Cooling Tower is complete with RCC, the tower life will be more than timber as well as FRP.

All other internal fills and Drift Eliminators are PVC / TIMBER as like other Cooling Towers. Spiral Bevel Gear Boxes are used in RCC Cooling Towers. The ranges of our RCC Cooling towers are 500M3 to 3000M3 /Cell. Higher capacities are available in multi cell construction.

For detailed Brochure, technical & dimensional details along with quotation can be obtained from our marketing department on request.

The FRP/ Natural traditional Cooling Towers are called as Fanless or Fill less Cooling Towers because in this model no fan or fill is used to cool the water. 

In Timber atmospheric / Fan less Cooling tower , treated wooden louvers were used as the side wall of the Cooling Tower to restrict the water spillage and allow the outside wind passage to go inside the Cooling Tower and act as the Cooling media. Simply says, in Fan less Cooling Towers the Hot water will be sprayed in the top of the Cooling Tower with spray nozzles into small droplets like mists and the droplets are crossed with the atmospheric wind flow to get the water cooled. The same technique is used in FRP Fanless / Natural Draft / Fill less Cooling Towers. Instead of costly timber louvers, FRP louvers are used. This Fanless cooling towers are very economically operating Cooling Tower. Since there is no fan or electric motor, there is no huge operating or maintenance cost involved in this Cooling Tower. And also in Energy efficiency point of view, this is the best Payback Cooling Tower when comparing with other models. 

And also very low noise operated Cooling Tower. The noises of other model cooling towers are due to Fan, Motor, Gear box and Drive shaft and its vibrations only. Since these models of Cooling Towers are not having Fan, motor, Gear boxes, this equipment has no trouble-some of noise and vibration. 

ICTMCo. offers field erected Pultruded FRP cooling towers. These cooling towers are designed using Pultruded FRP sections, FRP sheets for cladding, Stainless steel for fasteners and other hardwares. Properties of Pultruded FRP gives the cooling tower distinct advantages over other material of construction like concrete or timber. Engineering at ICTM CO. gives shape to the finest of cooling towers whose aesthetic beauty make cooling tower area very special place in the plant. The strength of Pultruded FRP can be compared with that of steel. With FRP the question does not stop at performance but carries on to beauty and aesthetics. With wide range of colours to choose from, the colour of cooling tower can be matched to rest of the plant. No wonder when ever a timber cooling tower reaches its end of its life, there is always a demand to convert it to Pultruded FRP cooling tower. 

For large field erected cooling tower Pultruded FRP structural members are used for constructing the cooling tower. Pultrusion is an industrial process that is dedicated to continuously process Reinforced Plastic having constant cross sectional shape like I, C, U, H, flat panels etc. Reinforcing fibers are pulled through a Plastic liquid impregnation bath through rollers etc. and then through a shaping die followed with a curing action. It produces products which meets high structural requirements, high weight to strength performances, electric requirements etc. In case of Pultruded FRP Cooling Towers materials are shipped to the site and cooling tower is erected first by putting up the structural framework and then fan deck, torque tube, mechanical assembly, fills, casing sheets etc. 

Pultruded FRP based cooling towers have structures having proven Braced Frame Design. These structures are connected to the ground with steel angles and base plates anchored and grouted to the basin. Hardware used at all the places are stainless steel. No piers and pilasters are used in the structure. Frame, Casing, Fan deck, Fan cylinder, staircase, railing, light poles, ladders etc are all of FRP. Wherever necessary anti skid surfacing is used for safety of Operation and Maintenance personnels. 

FRP Rectangular Shape Multi Cell Cooling Towers. belongs to the series of Counter-Flow Rectangular Shaped Cooling towers. The FRP Multi Cell Cooling Towers is made by the combination of FRP Multi Cell Cooling Towers and facilitates minimum drift loss because of fully covering drift eliminators. Our FRP Multi Cell Cooling Towers makes low noise and vibration. Also, we make it available at affordable prices. 

Highlights

• Minimum drift loss because of fully covering drift eliminators
• Combined design to save space
• Optimized Fan design for low power consumption, low noise and vibration

FRP Round Type Cooling Tower belongs to the Counter-Flow Bottle Shaped Cooling towers. Our FRP Round Type Cooling Tower has features such as rotating sprinklers to distribute the hot water uniformly, compact design for space saving, etc. Also, FRP Round Type Cooling Tower consumes low-power, makes low-noise and produces low vibration. Also, we make it available at affordable prices.

Highlights

• Rotating sprinklers to distribute the hot water uniformly,
• Compact design for space saving,
• Minimum drift loss because of double provision of drift elimination,
• Simple design leads to low maintenance.

FRP Square Type Cooling Towerbelongs to the Counter-Flow Square Shaped Cooling towers. The main features of FRP Square Type Cooling Tower are even water distribution through solid nozzles, minimum drift loss, etc. Our FRP Square Type Cooling Tower is manufactured using the best quality raw-material and consumes less power. We provide FRP Square Type Cooling Tower in simple designs in different cooling capacity range.

Highlights

• Has solid cone square pattern (SCSP) nozzles to distribute water evenly through a wide spray angle without any dry pocket
• Facilitates minimum drift loss because of fully covering drift eliminators
• Low Maintenance
• Optimized fan design for low power consumption, low noise & vibration

We are manufacturing Induced draft Cooling Tower in RCC Construction also both in Cross Flow and Counter Flow design. Since the structure of Cooling Tower is complete with RCC, the tower life will be more than timber as well as FRP.

All other internal fills and Drift Eliminators are PVC / TIMBER as like other Cooling Towers. Spiral Bevel Gear Boxes are used in RCC Cooling Towers. The ranges of our RCC Cooling towers are 500M3 to 3000M3 /Cell. Higher capacities are available in multi cell construction.

For detailed Brochure, technical & dimensional details along with quotation can be obtained from our marketing department on request.

The FRP/ Natural traditional Cooling Towers are called as Fanless or Fill less Cooling Towers because in this model no fan or fill is used to cool the water. 

In Timber atmospheric / Fan less Cooling tower , treated wooden louvers were used as the side wall of the Cooling Tower to restrict the water spillage and allow the outside wind passage to go inside the Cooling Tower and act as the Cooling media. Simply says, in Fan less Cooling Towers the Hot water will be sprayed in the top of the Cooling Tower with spray nozzles into small droplets like mists and the droplets are crossed with the atmospheric wind flow to get the water cooled. The same technique is used in FRP Fanless / Natural Draft / Fill less Cooling Towers. Instead of costly timber louvers, FRP louvers are used. This Fanless cooling towers are very economically operating Cooling Tower. Since there is no fan or electric motor, there is no huge operating or maintenance cost involved in this Cooling Tower. And also in Energy efficiency point of view, this is the best Payback Cooling Tower when comparing with other models. 

And also very low noise operated Cooling Tower. The noises of other model cooling towers are due to Fan, Motor, Gear box and Drive shaft and its vibrations only. Since these models of Cooling Towers are not having Fan, motor, Gear boxes, this equipment has no trouble-some of noise and vibration. 

ICTMCo. offers field erected Pultruded FRP cooling towers. These cooling towers are designed using Pultruded FRP sections, FRP sheets for cladding, Stainless steel for fasteners and other hardwares. Properties of Pultruded FRP gives the cooling tower distinct advantages over other material of construction like concrete or timber. Engineering at ICTM CO. gives shape to the finest of cooling towers whose aesthetic beauty make cooling tower area very special place in the plant. The strength of Pultruded FRP can be compared with that of steel. With FRP the question does not stop at performance but carries on to beauty and aesthetics. With wide range of colours to choose from, the colour of cooling tower can be matched to rest of the plant. No wonder when ever a timber cooling tower reaches its end of its life, there is always a demand to convert it to Pultruded FRP cooling tower. 

For large field erected cooling tower Pultruded FRP structural members are used for constructing the cooling tower. Pultrusion is an industrial process that is dedicated to continuously process Reinforced Plastic having constant cross sectional shape like I, C, U, H, flat panels etc. Reinforcing fibers are pulled through a Plastic liquid impregnation bath through rollers etc. and then through a shaping die followed with a curing action. It produces products which meets high structural requirements, high weight to strength performances, electric requirements etc. In case of Pultruded FRP Cooling Towers materials are shipped to the site and cooling tower is erected first by putting up the structural framework and then fan deck, torque tube, mechanical assembly, fills, casing sheets etc. 

Pultruded FRP based cooling towers have structures having proven Braced Frame Design. These structures are connected to the ground with steel angles and base plates anchored and grouted to the basin. Hardware used at all the places are stainless steel. No piers and pilasters are used in the structure. Frame, Casing, Fan deck, Fan cylinder, staircase, railing, light poles, ladders etc are all of FRP. Wherever necessary anti skid surfacing is used for safety of Operation and Maintenance personnels. 

FRP Rectangular Shape Multi Cell Cooling Towers. belongs to the series of Counter-Flow Rectangular Shaped Cooling towers. The FRP Multi Cell Cooling Towers is made by the combination of FRP Multi Cell Cooling Towers and facilitates minimum drift loss because of fully covering drift eliminators. Our FRP Multi Cell Cooling Towers makes low noise and vibration. Also, we make it available at affordable prices. 

Highlights

• Minimum drift loss because of fully covering drift eliminators
• Combined design to save space
• Optimized Fan design for low power consumption, low noise and vibration

FRP Round Type Cooling Tower belongs to the Counter-Flow Bottle Shaped Cooling towers. Our FRP Round Type Cooling Tower has features such as rotating sprinklers to distribute the hot water uniformly, compact design for space saving, etc. Also, FRP Round Type Cooling Tower consumes low-power, makes low-noise and produces low vibration. Also, we make it available at affordable prices.

Highlights

• Rotating sprinklers to distribute the hot water uniformly,
• Compact design for space saving,
• Minimum drift loss because of double provision of drift elimination,
• Simple design leads to low maintenance.

FRP Square Type Cooling Towerbelongs to the Counter-Flow Square Shaped Cooling towers. The main features of FRP Square Type Cooling Tower are even water distribution through solid nozzles, minimum drift loss, etc. Our FRP Square Type Cooling Tower is manufactured using the best quality raw-material and consumes less power. We provide FRP Square Type Cooling Tower in simple designs in different cooling capacity range.

Highlights

• Has solid cone square pattern (SCSP) nozzles to distribute water evenly through a wide spray angle without any dry pocket
• Facilitates minimum drift loss because of fully covering drift eliminators
• Low Maintenance
• Optimized fan design for low power consumption, low noise & vibration