Our Products
Epoxy Coatings
2 Products availableLubricants
2 Products availableCorrosion And Rust Control Products
1 Products availableCleaning Chemicals
1 Products availableIndustrial Chemicals
1 Products availableCompressor Oil
1 Products availableTextile Chemicals
1 Products availableCatalysts And Absorbents
1 Products availableCleaning Wipes & Liquids
1 Products availableLeading Manufacturer, Supplier & Retailer of Molywet Moly Based Assembly Spray, Omnilube Multipurpose 5 in 1 Maintenance Fluid, Yarnlube Knotter Splicer Spray, Jetex ABC-50 All Purpose Degreaser and Clener and Jetex As-325 Multipurpose Antiseize Compound.
Beltkote belt dressing is a non-staining, high tack, water resistant, synthetic lubricant cum belt conditioning treatment for improving grippage and preventing belt slippage for all flat, round and v-belts. It improves traction, prevents premature belt wearing off and eliminates belt squeaking or squealing noises. It conditions worn belts, maintains their flexibility and resilience to hardness while reducing slippage, cracking and glazing.
ApplicationsFor use on all round, flat & v-belts in fans, pumps, machines, conveyors, air conditioners, textile machines, compressors, generators in all industrial machinery, conveyor systems, motorised equipment and vehicles.
Directions for UseSwitch off the power and turn off the equipment beforespraying this product. Protective guards or covers may have to be removed in some instances. In such cases extreme caution must be observed to prevent accidents. Replace guards after application. Spray light, even film onto stationary belts from both the sides and may be applied to pulleys also. Allow few minutes for the solvents to evaporate before restarting the equipment. Reapply occasionally to maintain full power and to optimise belt life.
Caution Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
Benefits
Non Flammable, On Line, Electrical Contact Cleaner
CONTACLEAN-L is a non-flammable blend of high purity cleaners designed to clean electrical contacts and switches. Formulated specially for use on sophisticated equipment, this fast drying contact cleaner is non-conductive, does not leave any residue and is non-toxic. It has a very low surface tension and quickly penetrates minute crevices, cracks or pores to clean the surfaces and safely rinses off light oils, dust, fingerprints, silicones, oxides, carbon or moisture. Premium is safe to use on most plastics, metals, rubbers, elastomers & other insulating material and does not contain any CFC’s, chlorinated solvents or any ozone depleting chemicals. Formulated with non flammable, safe, CO2 propellant.
Applications For UseContacts, controls, relays, PCB’s, switches, motors, connectors, generators, ignition systems, terminals, sensors, circuit breakers, plugs & sockets, fuse boxes, transformers, switch gears, bearings, generators, gears, tuners, bush bars, connectors, potentiometers, solenoids, capacitors, communication equipment, oxygen systems, electrical equipment, electronic equipment, aviation equipment, industrial equipment.
Directions For Use Spray liberally on the surface to be cleaned till the cleaning agent runs off as clear. Use extension tube for hard to reach areas. Use an abrasive or brush to clean heavy oxides or other deposits. Spray starting at the top and finishing at the bottom. Test on plastics by using on a small area before use.
Benefits
Solid lubricant paste with extremely low coefficient of friction for effective running-in and metal assembly
Applications
Benefits
Directions for UseShake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. For cleaning the valve dip- tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.
Caution Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
GeneralUse in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).
Disposal All used and unused product should be disposed of in accordance with state regulations.
HandlingRead instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.
Limited WarrantyThe information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.
Molybdenum Disulfide Lubricant For Extreme Pressures
MOLYWET is a suspension of micro fine molybdenum disulfide solid film lubricant, extreme pressure additives and corrosion inhibitors in a special lubricating oil carrier. It deposits a thin, non-drying film of MoS2 onto the surface to form a low friction and wear reducing shield that eliminates metal-to-metal contact and increases wear life of the equipment. MOLYWET does not contain any type of solvents, CFCs or any ozone depleting chemicals.
Benefits
Applications
Directionsfor Use Shake the can vigorously for a couple of minutes before spraying. Repeat before every application. Spray onto a clean, dry and degreased surface in thin light coats. Spray using extension tube for pin-point application.
Caution Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
Omnilube is a fast acting industrial grade lubricant, rust Omnilube and corrosion inhibitor. It forms a clear thin non- drying lubricating film that penetrates deep into the minutest crevices to displace trapped moisture and leaves behind a protective film to seal out further moisture and corrosion. Its unique low surface tension formula rapidly attacks rust to free seized or frozen components. It is non-conductive, nonstaining and offers complete protection to metal surfaces indoors as a medium term corrosion inhibitor for protection against corrosion and moisture penetration for up to 12 months under normal storage conditions.Omnilube does not contain any silicones, ozone depleting chemicals, CFC’s or harmful chlorinated solvents and is safe for use on around all metals, plastics, rubbers and other industrial finishes.
Applications
Directions For Use - BulkApply by means of brush or by dipping component into the fluid. Allow solvents to penetrate and free rusted parts. Period for penetration may vary depending upon the length of time the product has been rusted for and in some cases may even take up to hours. Use an absorbent rag or a brush to remove dirt, rust, scales & dust. For moisture displacement, apply onto surfaces till only clear product (amber-pale straw) comes out and the emulsified residue is totally cleared. Never use on energized circuits or hot surfaces. Clean and dry surfaces completely before applying power. For metal protection, dip components or apply by brush and do not wipe off protective film from the surface.
Directions For Use - Aerosol For rust penetration, spray liberally onto the surface. Allow solvents to penetrate and free rusted parts. Period for penetration may vary depending upon the length of time the product has been rusted for and in some cases may even take up to hours. Use an absorbent rag or a brush to remove dirt, rust, scales & dust. For lubrication, spray lightly and evenly over surface area to be lubricated. For moisture displacement, spray until clear product comes out and emulsified residue is totally clear. For metal protection, spray liberally and do not wipe off protective film from the surface.
CautionContains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
Synthetic Lubricant & Cleaner for Precision Textile Equipment
YARNLUBE spray is a non-staining synthetic lubricant cum cleaner for textile machinery parts such as scissors and cutting mechanisms of knotters and splicers in weaving, winding, spinning, sewing and knitting machinery where mechanisms are intricate and delicate and operating speeds are high.
It is useful for cleaning dirt, dust, fluff and provides a non-staining, anti static mild lubricating film for reducing wear and friction.
YARNLUBE spray does not contain any CFCs or harmful ozone depleting substances.
Benefits
Directions for UseSpray evenly thin light coats on clean and dry surfaces. Allow the cleaning solvents to evaporate. Spray from a distance of 20-30 cms. Use extension tube for pinpoint application.
CautionFlammable contents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
General Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).
DisposalAll used and unused product should be disposed of in accordance with state regulations.
Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.
Limited WarrantyThe information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.
Cold Galvanizing Coating With Brilliant Shiny Finish To That Of Hot Dip Galvanizing
ZINKOTE is a high performance zinc and aluminium coating designed to provide true galvanic corrosion protection to metals and stop rusting.
It air dries fast on application to leave a film that is highly resistant to heat, water, corrosion and saline environments. It bonds to bare metals without requiring any baking and offers maximum protection against corrosion under severe conditions. It does not contain any chlorinated solvents, CFCs or ozone depleting chemicals
Benefits
ApplicationsStructural steels, transmission towers, welding seams, bridges, relay towers, piping & ducting, offshore equipment, nuclear & power plants, antennas, metal fabrication, industrial maintenance, touch up to damaged galvanised coatings.
DirectionsFor Use Clean and degreased the surface prior to application. Remove all rust and loose scales by wire brush. Shake can well for a couple of minutes till bearing noise from inside the can is audible. Repeat the same before every application. Spray light, even coats with sweeping action of the hand onto completely dry surface. Allow solvents to completely evaporate before re- application. Optimum desired film thickness is about 2-3 mils. Drying time to touch is about 10-15 minutes, to handle is about one hour and for complete cure is about 24 hours. Flush away paint products or product residues in the dip tube of the valve by cleaning it. Cleaning of the valve should be performed after spraying is finished, by inverting the can and pressing the actuator button in short bursts till only the propellant comes out. If required, to prevent clogging, remove the actuator button and clean the button orifice with a thin, fine wire.
Caution Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
JETEX ABC-50 CLEANER is a multipurpose, non-abrasive, aqueous, biodegradable, cleaner / degreaser which can be further diluted with water to meet various cleaning applications.
It aggressively attacks and removes grease, oil, dirt, sludge and other light contaminants and allows to be rinsed off with water.
It does not contain any ozone depleting chemicals or chlorinated solvents and equals performance of solvent-based cleaners.
ApplicationsSuitable for mechanical components washing and degreasing applications.
Benefits
Dilution levels will vary subject to the type of surface, contaminant and contamination level of the surface being cleaned. Start at higher concentrations of JETEX ABC-50 CLEANER in water and work up to lower concentrations till satisfactory performance and cleaning is obtained.
Directions for Use Dilute the product by adding water to it. Stir mechanically with a stirrer if required. Apply product by brush, swab or by dipping components into the cleaner solution. Allow time to penetrate contaminants and then rinse off with water. For heavily soiled parts, use a wire brush or an abrasive to remove excesses. Always clean the surface thoroughly with water to remove any residues left behind and never allow to dry on any surface. Test for compatibility on soft metals and plastic surfaces by checking on a small area.
General Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).
DisposalAll used and unused product should be disposed of in accordance with state regulations.
Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.
Limited Warranty The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.
Fast evaporating, residue free, cleaner / degreaser for fast removal of contaminants from metal surfaces; free of chlorinated solvents
JETEX HDG-86 is a non chlorinated, fast drying cleaner / degreaser for mechanical cleaning applications as a alternative for chlorinated solvents like CTC, 1, 1, 1 Trichloroethane. Safety standards from both, worker health as well as environmental, prohibit the use of chlorinated solvents like CTC or 1, 1, 1 TCE.
JETEX HDG-86 rapidly penetrates through grease, oil, dirt, dust and other contaminants and cleans equipment fast. It has a pleasant citrus odor, fast evaporation rate and does not leave any residue. JETEX HDG-86 cleans metal surfaces effectively due its superior penetrating and wetting ability.
It does not contain any CFC’s, chlorinated solvents or ozone depleting chemicals and is suitable for cleaning / degreasing of all metal surfaces and equipment only.
ApplicationsFor heavy duty cleaning / degreasing applications of all mechanical equipment as brakes, chains, gears, bearings, clutches, generators, hand tools, molds, dies, slides, pumps, forklifts, valves, nuts & bolts, pipes, power tools. Safe for use on all metal surfaces, glass, most plastics and ceramics.
Benefits
Directions for Use (Bulk)Never use on energized equipment. Do not dilute with any other cleaning agent, water or mix with any solvent. Apply onto soiled surface and continue dipping / applying / spraying liberally until only solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Allow solvents to dry off the components before reactivating. To enhance drying time, apply forced air or wipe dry with an absorbent cloth after applying. Use only when completely dry. Test on plastics prior to use for compatibility.
Directions for Use (Aerosol)Never use on energized equipment. Spray using pin-point extension tube onto soiled surface and continue spraying liberally until only solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Spray starting at the top of the surface and slowly working towards the bottom. Allow solvents to dry off the components before reactivating. To enhance drying time, apply forced air or wipe dry with an absorbent cloth after applying. Use only when completely dry. Test on plastics prior to use for compatibility.
Caution: Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
GeneralUse in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).
DisposalAll used and unused product should be disposed of in accordance with state regulations.
HandlingRead instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.
Limited WarrantyThe information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.
High temperature copper based anti seize thread compound
Solid lubricant paste for all threaded & bolted connections; lead and nickel free
Applications
Benefits
Directions for UseShake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. For cleaning the valve dip- tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.
Caution:- Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
General Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).
DisposalAll used and unused product should be disposed of in accordance with state regulations.
Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.
Limited Warranty The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.
High Gloss Fast Drying Flexible Acrylic Conformal Coating
ELECTOCOAT is a fast air-drying, lightweight, clear, tough and flexible acrylic coating designed primarily to protect printed circuit boards and electrical / electronic equipment against high voltage arcing, corona shorts, corrosion, ingress of moisture and fungus. It resists rust, tarnish, corrosion, moisture and has excellent waterproofing / weatherproofing abilities. ELECTOCOAT is highly abrasion & scratch resistant and protects electronic equipment completely due to its high dielectric strength. It does not contain any harmful chlorinated solvents, CFCs or ozone depleting chemicals.
Benefits
Applications Insulation and protection of all electrical, electronic and high- tech equipment of: general electronics, printed circuit boards, thick film circuits, high voltage transformers, electrical motor coils, cables, wires; for moisture proofing and corrosion prevention of any industrial, automotive, aviation, marine and military electrical & electronic hardware.
Directions For Use - Bulk Mask and protect areas not to be coated. Apply steady even strokes by means of brush. Component to be coated can also be dipped into the coating. For best results, two light coats are better than one heavy coat. Coating becomes dry to touch in about 15-20 minutes. Complete cure takes place in about 24 hours depending upon the relative humidity.
Directions For Use - Aerosol Shake can vigorously for at least one minute after bearing noise from inside the can is audible. Mask and protect areas not to be coated. Hold can 12-15 inches away from surface to be coated and spray in steady, even strokes. For best results, two light coats are better than one heavy coat. Coating becomes dry to touch in about 15-20 minutes. Complete cure takes place in about 24 hours depending upon the relative humidity. Clean the valve by inverting the can and spraying a few short bursts till only the clear propellant comes out. Clean the actuator button orifice by means of a thin, fine wire.
Caution:- Contains flammable propellant and solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
MoS2 and solid lubricants based air-drying anti friction coating
Benefits
n
Applications
n
Directions for Use Shake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. Excess lubricant may fall off during assembly. For cleaning the valve dip-tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.
Caution:- Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
JETEX CompressorOil 68 SPis a high performance compressor oil developed for screw compressors. It provides sufficient lubrication under a wide operatingtemperature and load conditions. The formulation provides superior thermal & oxidation stability, good demulsibility and rust protection.
Application
Benefits
Performance standardsPerformance exceeds the requirements of the following standards,
SKO – 22 Oil is synthetic knitting oil (Revolutionary & Certified Lubricant), specially designed and formulated for the lubrication of sinkers & needles of knitting machine to provide long life and extremely low friction performance. It is non-staining synthetic oil which does not leave any carbonaceous deposits, and due to its excellent lubricity, it reduces the power consumption & operating temperature of a machine. Its mild antistatic and antirust properties make it suitable for use in high speed knitting, texturizing and winding machinery employed in Textile and Polymer industries.
It is fully scourable and does not leave any stains whatsoever after the fabric is washed. It does not damage the paints or rubber and plastic parts used in knitting machines or affect the electrical controls of the machine. It is very much suitable for any brand or make such as (Terrot, Fukuhara, Orizio, Monarch, Camber, Vanguard, Mayer & Cie, Year China, Smart, etc.) And any (Circular & Linear) types of knitting machines.
Exclusive Features :
a range of high performance specialty industrial lubricants for all types of industries.
.Copper and solid lubricants paste for all nuts, bolts, screws, threaded connections; lead and nickel free
ApplicationsAnti seize, anti rust & effective lubricant for protection of parts operating under severe corrosion, temperatures and steam, humidity, water or chemical attack as: studs, nuts, bolts, screws, pipes, keys, u-bolts, splines, taps, slides, seals, slippers, joints, plugs, gears, chains, exhausts sprockets, valve stems, manifolds, couplings, adapters, bearings, gaskets, packings, drills, bushings, king pins, spindles. For use on all threaded and flanged connections operating at very high temperatures to prevent seizure, corrosion and atmospheric influences as in: cat crackers, autoclaves, cylinder heads, furnace bolts, generators, fuel feed nozzles, boilers, reactors, ladles in steel plant, turbines, burners, extrusion mandrels, ovens, soot blowers, blast furnaces, pumps, engines, steel plant equipment, compressors, heat exchangers.
For use in oil rigs, refineries, petrochemical, chemical & fertiliser plants as a heavy duty thread assembly compound, pipe sealant and anti corrosion compound for components exposed to very high temperatures, steam, hot, cold, brine water, humidity, corrosive or chemical environments to provide protection, effective lubrication, sealing and corrosion protection and prevent seizure, jamming and rusting even after long operational hours under very severe conditions.
For use in rotary kilns in cement plants as a high temperature, extreme pressure, low friction lubricant for effective lubrication of live ring supports.
Benefits
Methods of Application Clean and degrease the surface prior to application. Remove all coatings, greases, dirt, grime, loose rust and scales by means of a fine thin wire. Apply METAPLAT liberally by means of a stiff wire brush on to the surface and evenly right down to the roots of threads. Excessive compound provides a good sealing effect and need not be removed. Do not mix with conventional oils and greases.
Note METAPLAT is not for use as a lubricant for high-speed bearings. However it may be used for lubrication of heavily loaded bearings under very slow speeds.
Dielectric, non-melting silicone grease like compound for electrical parts insulation and moisture protection
Applications
Benefits
n
Method of Application Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.
Directions For Use (Aerosol only) Shut off equipment and turn off power before spraying. Spray thin, light and even coats onto clean, dry and moisture free surfaces to a thickness of about 0.4-0.5 mm. For optimum use, clean surface dry from moisture. Allow few minutes for solvent to completely evaporate before resuming operations. Removal of the film can be done by normal degreasing solvents.
Caution (Aerosol only) Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.
Silicone grease like compound for use as a release and separating agent
Applications
Benefits
Method of Application Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.