heavy duty, multipurpose extreme pressure grease containing mos2 solid lubricant

features

n

n
• extremely wide service temperature range of -20c to +180c
n
• forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces
n
• prevents metal-to-metal contact, reduces friction, wear & protects against fretting corrosion
n
• highly resistant to hot or cold water and water washout
n
• extends relubrication intervals and cuts down lubricant consumption
n
• combination of ep additives and solid film lubricants increase the load bearing capacity and provide emergency running in and boundary lubrication
n
• offers good surface protection and corrosion inhibiting properties
n
• very good performance under moderate to high loads and medium speeds under reciprocating motions
n
• makes sliding smoother and reduces operational noise
n
• increases wear life of the equipment & out performs conventional lubricants
n
• good resistance to oxidation applications
n
• use successfully for roller bearing, all types of anti-friction bearings, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
n
• for heavy duty and long term lubrication to bearings and equipment of textile processing & heavy engineering machinery.
n
• for long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.
n

n

applications

n

n
• use successfully for roller bearing, all types of anti-friction bearings, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
n
• for heavy duty and long term lubrication to bearings and equipment of textile processing & heavy engineering machinery.
n
• for long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to
n
• severe impact loads and slow operating speeds.
n

n

method of application apply on all clean sliding surfaces by normal greasing methods i.e. By brush, grease gun or dispense via centralized lubrication systems. Do not mix with other oils or grease.

Applications

• Use successfully for roller bearing, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces, journal bearings, couplings.
• For long lasting lubrication of cams, shafts, spring, joints, steel cables and similar equipment operating under light to medium loads and low to high speeds.

Benefits

• Extremely wide service temperature range of -25°C to +120°C
• Reduces friction and wear
• Low evaporation rate increases relubrication intervals
• High load carrying capacity
• Highly resistant to hot or cold water and water washout
• Offers good surface protection and corrosion inhibiting properties
• Good resistance to oxidation
• Can be dispensed via centralised lubrication systems

Directions for Use Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralised lubrication systems. Do not mix with other oils orgrease.


GeneralUse in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


Disposal All used and unused product should be disposed of in accordance with state regulations.


Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Solid lubricant paste for effective running in, assembly, press fitting and anti seize applications

Benefits

n

n
• Extremely wide service temperature range of -25°C to +450°C (up to +630°C in areas with restricted air access)
n
• Low coefficient of friction
n
• High pressure withstanding capacity
n
• Load bearing capacity exceeds the yield point of most metals
n
• Offers protection from wear and friction
n
• Eliminates metal-to-metal contact
n
• Prevents seizure, scoring, galling, fretting corrosion and stick slip
n
• Makes disassembly easier and non-destructive irrespective of operational period or conditions
n
• Economical to use owing to its high surface coverage capacity
n
• Aids running in and provides emergency lubrication during start ups
n
• Prevents cold welding and stick slip
n
• Good affinity for metal surfaces
n

n

Applications

n

n
• As a running-in, metal priming paste for all new or rebuilt mechanical equipment such as journal bearings, gear boxes, splines.
n
• As a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.
n
• For lubrication of all sliding metal surfaces to reducewear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splines shafts, pumps,
n
• valves, threaded spindles, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings.
n
• As a metal working lubricant to prevent galling, seizure, welding and metal pick up on tools and dies in deep drawing, machining, punching, stamping, thread rolling,
n
• cold heading, waging and forging.
n
• As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.
n
• As an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.
n
• As a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling.
n

n

Method of Application Clean the sliding surfaces and friction points. Apply this paste with a brush or cloth and rub intensively on the metal surface to form a thin uniform film. Do not use in excess as is customary with greases. Do not mix with other oils or grease.

JETEX EPS-10 Spindle Oils are premium quality, highly refined lubricating oils formulated for use in high-speed, lightly loaded bearings, running at speeds of 20, 000 to 40, 000 RPMs, found in textile spinning frames and in automated machine tools. JETEX EPS-10 Spindle Oils provide excellent oxidation stability, rust protection and resistance to deposit formation. Their low viscosities reduce oil thickness, lowering operating temperatures by reducing friction. The carefully balanced anti-wear chemistry contained in JETEX EPS-10 Spindle Oils helps extend equipment life.


Applications

n

n
• textile industry where machine oil does not contact fabrics or oil staining is not an issue
n
• automatic machine tools and other applications where operating speeds are in excess of 10, 000 rpm
n

n

Features/Benefits

n

n
• excellent oxidation stability
n
• non-corrosiveness to metals
n
• excellent water separation characteristics
n
• excellent protection from rust and oxidation
n
• excellent anti-wear properties
n

n

Approvals and Recommendations

n

n
• Cincinnati Lamb P-45 (JETEX EPS-10 Spindle Oil 22)
n
• Cincinnati Lamb P-62 (JETEX EPS-10 Spindle Oil 10)
n

n

Applications:Omnigear EP Gear Oils are 100% synthetic, heavy duty industrial PAgear oils intended for enclosed gears operating under adverse loads and temperatures. A variety of seven ISviscosities covers a wide range of temperature and load conditions.


Characteristics:

• Reduced downtime due textended change intervals
• High viscosity index
• Wide temperature range -50F t+250F, depending on grade chosen
• Longer life than conventional oils.
• Intended for heavy-duty extreme pressure industrial applications.

Meets the requirements of:

• U.S. Steel 224
• David Brown S1.53.101
• AGMA 250.04
• Cincinnati Milacron
• DIN 51517 Part 3

Solid lubricants based grease paste for reducing wear and withstanding high pressures; metal free

Applications

n

n
• Highly recommended for use on all threaded and flanged connections operating at very high temperatures and corrosive conditions to enable faster and rapid non destructive disassembly after long operational periods as in autoclaves, furnace, boilers, reactors, turbines, extrusion mandrels, compressors, heat exchangers, gas generators, plastic molding machines, chemical, petrochemical, refining, iron and steel, wood manufacturing equipment.
n
• Heavy duty thread compound for studs, nuts, bolts, valve stems, spindles, exhaust pipes, cylinder and engine head screws, steam lines exposed to high temperatures, water, steam, saline, chemical and corrosive environments to provide complete protection from seizure and corrosion.
n
• Use for press fit joints, guides, sliding contact surfaces, door hinges, seals, spark plugs, springs.
n

n

Benefits

n

n
• Extremely wide service temperature range of -40°C to +1500°C
n
• Makes disassembly very easy and non-destructive even after long operational periods at high temperatures and adverse working environments
n
• High load withstanding capacity and creates an effective matrix between mating surfaces to prevent metal-to-metal contact
n
• Protects surfaces from wear and friction
n
• Good corrosion protection
n
• Lower breakout torque
n
• Prevents bolt breaking, sintering, fusion, seizure, thread striping and distortion of threads, stress cracking
n
• Low coefficient of friction
n
• Reduces wear and increases service life of components
n

n

Directions for Use Use as supplied. Never dilute or mix with other oil or grease. Clean and degrease the surface of all previous residues prior to application. With a wire brush, apply the paste in adequate quantity on the surface and right down up to the base stem of the thread. The excess paste need not be removed as it provides a good sealing effect.


General Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


Disposal All used and unused product should be disposed of in accordance with state regulations.


Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

JETEX BRG-575 HTS GREASE is a low-noise, high-speed grease for plain and rolling bearings. It consists of synthetic oil and lithium soap along with additives for protection from corrosion and oxidation. It is highlyresistant to ageing and offer low internal friction. It reduces friction and wear; increases service life of the equipment and cuts down on lubrication costs by increasing relubrication intervals.


Features

n

n
• Extremelysoft consistency
n
• Highlyoxidation stable
n
• Water-resistant & prevents corrosion
n
• Low-noise and low-friction grease
n
• Good corrosion protection
n
• Resistant to oxidation and ageing
n
• Verygood low temperature performance
n

n

Applications High speed stenter frames in textile industry, glass works, paint booths, automotive assembly lines, varnish curing booths, open chains in industry, steel plants, paper and plywood manufacturing units, ceramic processing plants, latex manufacturing plants, lubrication of all chains, clips, bearings.


Benefits

n

n
• Extremely wide service temperature range from -10°C to +250°C
n
• Very good extreme pressure properties enhance load carrying abilities and reduces frictional wear
n
• Extremely low evaporation rate at high temperatures
n
• Due to its absolute synthetic formulation, there is no carbon or resinous deposit even at high temperatures
n
• Minimised deposit formation reduces cost related to chain cleaning such as labour, production loss and downtime
n
• Lower evaporation rate reduces consumption and allows for extension of lubrication periods thereby cutting down on lubrication costs
n
• Provides superior lubrication and protection even when subjected to high temperatures and humid conditions
n
• Due to superior lubrication, power requirements are reduced resulting in both lubricant as well as energy savings
n
• Cost savings due to reduction of parts premature wearing out and replacements are also greatly increased
n
• Good adhesive properties and water resistant
n

n

Methods of Application For optimal lubrication and adhesion, clean and degrease the surface of all previous residues, lubricants or contaminants with JETEX DG-50 heavy duty degreaser. Apply to clean surface by regular oiling methods i.e. by brushing, spraying, dipping or drop feed oiling mechanisms. Allow time for lubricant to penetrate and excess lubricant to drip off before restarting operations. For new chains: Thoroughly clean prior to applying this lubricant. It is recommended to keep new chains dipped in the lubricant for 30 minutes to ensure complete penetration to all innermost points. Avoid excessive use. Do not mix or dilute with other oils or grease. Use as per instructions laid down in manufacturers manual. Replace cap after use.

Hydrraulliic HLP 32, , 46, , 68, , 100
JETEX Hydraulic HLP grades are high performance anti-wear hydraulic oils specially formulated from premium quality solvent refined base oils and high performance additives and have excellent product stability with good anti-wear performance


Application

n

n
• Lubrication of industrial machinery
n
• Hydraulic systems of mobile and construction equipment
n
• Hydraulic systems fitted with vane, gear or piston pumps
n
• Plastic injection moulding machines
n
• Medium duty compressors
n

n

Benefits

n

n
• Excellent filter life due to superior dry & wet filter ability
n
• Longer equipment life due to lower wear & tear of aggregates
n
• Reduced equipment downtime
n
• Trouble free operation
n

n

Performance standardsThey exceed the performance requirements of the following standards,

n

n
• Denison Hydraulics HF-0 Eaton M-2950-S & Eaton I-286-S3
n
• DIN 51524 Part II Class HLP
n
• Cincinnati Machine P-68, P-69 & P-70
n

Applications High speed stenter frames in textile industry, glass works, paint booths, automotive assembly lines, varnish curing booths, open chains in industry, steel plants, paper and plywood manufacturing units, ceramic processing plants, latex manufacturing plants, lubrication of all chains, clips, bearings.


Benefits

• Extremely wide service temperature range from -10°C to +250°C
• Very good extreme pressure properties enhance load carrying abilities and reduces frictional wear
• Extremely low evaporation rate at high temperatures
• Due to its absolute synthetic formulation, there is no carbon or resinous deposit even at high temperatures
• Minimised deposit formation reduces cost related to chain cleaning such as labour, production loss and downtime
• Lower evaporation rate reduces consumption and allows for extension of lubrication periods thereby cutting down on lubrication costs
• Provides superior lubrication and protection even when subjected to high temperatures and humid conditions
• Due to superior lubrication, power requirements are reduced resulting in both lubricant as well as energy savings
• Cost savings due to reduction of parts premature wearing out and replacements are also greatly increased
• Good adhesive properties and water resistant

Methods of Application For optimal lubrication and adhesion, clean and degrease the surface of all previous residues, lubricants or contaminants with JETEX DG-50 heavy duty degreaser. Apply to clean surface by regular oiling methods i.e. by brushing, spraying, dipping or drop feed oiling mechanisms. Allow time for lubricant to penetrate and excess lubricant to drip off before restarting operations. For new chains: Thoroughly clean prior to applying this lubricant. It is recommended to keep new chains dipped in the lubricant for 30 minutes to ensure complete penetration to all innermost points. Avoid excessive use. Do not mix or dilute with other oils or grease. Use as per instructions laid down in manufacturers manual. Replace cap after use.

Heavy duty, multipurpose extreme pressure grease containing MoS2 solid lubricant

• Extremely wide service temperature range of -30°C to +150°C (up to +180°C for short intervals)
• Forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces
• Prevents metal-to-metal contact, reduces friction and wear & protects against fretting corrosion
• Highly resistant to hot or cold water and water washout
• Extends relubrication intervals and cuts down lubricant consumption
• Combination of EP additives and solid film lubricants increase the load bearing capacity and provide emergency running in and boundary lubrication
• Offers good surface protection and corrosion inhibiting properties
• Very good performance under moderate to high loads and medium speeds under reciprocating motions
• Makes sliding smoother and reduces operational noise
• Increases wear life of the equipment & out performs conventional lubricants
• Good resistance to oxidation

Applications

• Use successfully for roller bearing, all types of anti- friction bearings, plain bearings, roller guides, threaded spindles, splines shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
• For heavy duty and long term lubrication to bearings and equipment of heavy engineering machinery, textile processing machines, compressors, exhaust fans, overhead cranes, mining and construction equipment, chassis of automotive and transportation fleet, sugar and cement plant machinery, rolling mills.
• For long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.

Method of Application Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralised lubrication systems. Do not mix with other oils or grease.

Heavy duty, multipurpose extreme pressure grease containing MoS2 solid lubricant for high temperatures

Benefits

• Extremely wide service temperature range of -25°C to +250°C
• Forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces
• Prevents metal-to-metal contact and reduces friction and wear
• Offers protection against fretting corrosion
• Highly resistant to hot or cold water and water washout
• Extends relubrication intervals and cuts down lubricant consumption
• Combination of EP additives and solid film lubricants increase
• the load bearing capacity and provide emergency running in and boundary lubrication Offers good surface protection and corrosion inhibiting properties Very good performance under moderate to high loads and high
• speeds and low speeds at reciprocating motions Makes sliding smoother and reduces operational noise
• Increases wear life of the equipment Good resistance to oxidation Can be dispensed via centralised lubrication systems Out performs conventional lubricants

Applications

• Use successfully for roller bearings, all types of anti- friction bearings, plain bearings, guides, threaded spindles, splines shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
• For heavy duty and long term lubrication to bearings and equipment of heavy engineering machinery, textile processing machines, compressors, exhaust fans, overhead cranes, mining and construction equipment, chassis of automotive and transportation fleet, sugar and cement plant machinery, rolling mills.
• For long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.

Method of Application Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralised lubrication systems. Do not mix with other oils or grease.

Nickel based high temperature anti seize compound meeting purity levels for nuclear power plant equipment

Applications

n

n
• Primary applications for JETEX NS-369 is in Nuclear PoPwer lants, Steel Plants, Petrochemical & Fertilizer Units, Refineries for providing high temperature, extreme pressure, anti seize and anti corrosion lubrication for equipment as burner tips, furnace hinges, reactor bolts, studs, pipe fittings, threaded connections, flanges, pump fittings, unions.
n
• It can be used as a heavy duty anti seize thread compound for all high strength alloys, nickel alloys and stainless steel hardware or fittings to provide effective lubrication at high temperatures and prevent seizure.
n
• It can be safely used in the presence of ammonia, acetylene or vinyl monomers that are unstable in the presence of copper.
n

n

Benefits

n

n
• Extremely wide service temperature range from -30°C to +1427°C.
n
• Eliminates metal to metal contact and maintains lubrication qualities under wide variations of temperature and adverse operating conditions and prevents galling, hardening, fretting, seizure, stripping, cold-welding, sintering, fusion of threads, bolt breaking and distortion
n
• Enables faster and rapid assembly and non-destructiv disassembly even after long term exposure to high temperatures and corrosive atmospheres
n
• Does not contain any ingredients that may poison reactor catalyst beds such as copper, lead, sulfurs, chlorides, halogens, silicones
n
• Highly resistant to hot & cold water, brine water, steam, humidity, moisture, dilute acids and alkalis, rust, corrosion and oxidation
n
• Safe to be used in the presence of ammonia, acetylene and vinyl monomers which are highly unstable in the presence of copper Low friction properties reduce wear and friction to increase life of the equipment
n
• Chemically inert and does not react with metals to cause pitting, and prevents intergranular or electrolytic corrosion of high strength ferrous or non-ferrous materials
n
• Extremely recommended for use on all high strength alloys, stainless steel and nickel alloys
n
• Meets purity levels for use in nuclear class hardware
n

n

Method of Application Clean and degrease the surface prior to application. Remove all coatings, greases, dirt, grime, loose rust and scales by means of a fine thin wire. Apply Nikkel Lube liberally by means of a stiff wire brush on to the surface and evenly right down to the roots of threads. Excessive compound provides a good sealing effect and need not be removed. Do not mix with conventional oils and greases.

Stiff, non melting silicone grease compound for use as a valve lubricant and sealant

Applications

n

n
• Lubricant for O-rings, packings, rubbers, gaskets, miniature bearing seals to provide resistance to water, chemicals, oxidation and provide thermal stability
n
• Lubrication of pneumatic control valves, fire extinguishers and water softener valves
n
• Sealant and lubricant for glass joints and stopcocks in normal as well as high vacuum systems
n
• Lubricant for pressure lubricated plug valves, flow meter bearings, ceramic plug cocks
n
• Sealant for vacuum and pressure systems
n
• Sealant between synthetic rubber or plastic parts to prevent them from sticking to in vacuum or pressure systems
n
• Chemical barrier and resistant coating for chemical processing equipment
n
• Damping media for dash pots in electrical and electronic equipment
n
• Assembly agent for holding rubbers and other parts due to its highly tacky nature
n
• All ingredients comply with regulations for food grade materials
n

n

Benefits

n

n
• Wide service temperature range from -40C to + 200C Very good oxidation resistance
n
• Completely resistant to water, steam, humidity and corrosives
n
• Low Vapor pressure and low volatility
n
• Compatible with plastics, rubbers, elastomers, and other gasketing and O-ring seal materials
n
• Prevents age hardening, stress cracking and maintains resilience of plastics
n
• Non gumming, non melting and non toxic
n
• Provides good lubricating and sealing properties for rubbers and plastics
n
• Chemically inert and resistant to most chemicals, hot and cold water, vegetable and mineral oils, dilute acids and alkalis, glycerin, ethanol, methanol, butane, steam, natural gas, ethylene glycol, most organic and inorganic chemicals and aqueous solutions.
n

n

Methods of Application Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.

Heavy duty, multipurpose extreme pressure grease containing MoS2 solid lubricant
JETEX CG-100 GREASE is a highly adhesive, semi fluid extreme pressure grease for lubrication and corrosion protection of wire ropes and steel cables operating under adverse conditions of load, temperatures or environment. It penetrates rapidly through wire rope strands to leave a completely water resistant heavy duty lubricating film which provides both internal as well as external lubrication & corrosion protection. The solid lubricants prevent wearing and premature damage of internalstrands and increase the life of the wire ropes. It forms a protective and lubricating waterproof film over the surface which does not emulsify even if submerged in water.


Benefits

n

n
• Protect against heavy loads, galling, and seizing
n
• Molybdenum disulfide solid lubricant & EP additives withstand high loads and pressures
n
• Reduces wear and friction
n
• Resists vibratory shocks
n
• Does not break down or melt or fling under prolonged use
n
• Effectively provides lubrication & corrosion protection even to the innermost strands
n

n

Applications On wire ropes and steel cables in all cranes, ships, hoists, elevators especially exposed to marine environment or under adverse operating conditions.


Method of Application Apply by spraying, brush or swabbing methods. Apply onto a clean, dry and degreased surface in thin light coats. Do not over apply.

JETEX EC-111 GREASE is a synthetic grease designed specifically for providing conductivity to electrical contacts. It provides superior lubrication and offers complete protection to electrical contacts from weathering influences such as corrosion, oxidation, and moisture penetration. This soft consistency grease prevents burning, oxidation, carbonation, arcing and erosion of contact surfaces. It is non-drying and forms an invisible film between bearing or sliding surfaces to reduce frictional wear and improve life of contacts. Based on synthetic fluids, this grease is free from any mineral hydrocarbon fluids that may cause carbonation or any migrating silicones and is safe to use on all surfaces.


Benefits

n

n
• Extremely soft consistency
n
• Water-resistant & prevents corrosion
n
• Reduces contact wear and improves conductivity
n
• Increases life of equipment
n
• Acts as an anti oxidant and anti corrosion sealant
n
• Prevents spark erosion and burning
n
• Reduces cross contact seizing
n
• Preserves contacts even at high temperatures or heat
n
• Highly oxidation and chemically stable for long intervals of time
n

n

Applications

n

n
• Contacts in precision engineering.
n
• Electric contacts of all types to prevent spark erosion and burning.
n
• Contacts and equipment under severe arcing conditions and corrosive atmospheres such as battery terminals, voltage regulators, sliding contacts, relays, rheostats, bus bars, mechanical controllers, interrupters, plug sockets, over load tap changers.
n

n

Method of ApplicationBy cloth or brush. Do not mix with any other oils or grease.

JETEX EC-424 grease is a specially formulated, highly conductive lubricant cum protective agent for maintenance free lubrication of electrical contacts and linkages in high and low voltage electrical transmission equipment. It does not harden even after long-term exposure to high temperatures and exhibits excellent high temperature oxidation resistance and protection to electrical contacts from weathering influences such as corrosion and moisture. It forms a wear reducing, heat dissipating lubricating film between surfaces to increase life of contacts and equipment.


Benefits

• Highly conductive and suitable for transmission of electricity at high or low voltages
• Prevents corrosion and preserves contacts even at high temperatures or heat
• Withstands severe arcing
• Preserves contacts at high temperatures
• Permits minimum voltage drop across contacts
• Highly oxidation stable
• Very good conductor of heat and electricity
• Maintains a solid lubricating film over the surface and prevents premature wearing of contacts
• Increases life of contacts

Applications

• Lubrication of electric powered contacts at high and low voltages.
• Electrical contacts and linkages in precision engineering and circuit breakers (up to 33kV).
• Contacts and equipment under corrosive atmospheres such as battery terminals, switches, sliding contacts, relays, mechanical controllers, interrupters, plug sockets, over load tap changers.
• As a heat sink media to facilitate conduction of heat and electricity.

Method of ApplicationBy cloth or brush. Do not mix with any other oils or grease.

JETEX SWR-12 grease is based on a special highly heat stable silicone fluid and soap thickener along with additives to impart extreme pressure properties and prevent high temperature oxidation. This grease is capable of withstanding very high temperatures and maintains its consistency. It is inherently inert and possesses a high degree of shear stability and resistance to oxidation. It does not dry out, harden or melt even after long-term exposure to high temperatures and has very good resistance to water, steam, humid environments and chemicals. It is very effective for lubrication of bearings under light to moderate loads and metal and plastic surfaces.


Benefits

n

n
• Extremely wide service temperature range of -40°C to +204°C
n
• Exceptionally good oxidation resistance
n
• High shear stability
n
• Does not thin out at high temperatures
n
• Stable, chemically inactive and inherently more inert than petroleum based products
n
• Resistant to ageing, water, moisture, steam, humidity and corrosive environments
n
• Non toxic and non staining
n
• Low evaporation and does not volatile at higher temperatures
n
• Safe for use on metal, plastic and rubber components (except those made of silicone)
n

n

Applications For lubrication of rolling element bearings operating under light to moderate loads as in oven fans, exhaust motors, kiln pre-heaters, oil burners, textile slashers and driers, conveyors, washing machines, air conditioners, domestic appliances, data processing equipment, aircraft engines, radiator cooling fans, electrical motors, vacuum machines and plastic components.


Method of Application Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralised lubrication systems. Do not mix with other oils or grease.

It is a heavy duty grease with high quality lubricating graphite flakes and anticorrosive additives to withstand heavy loads in humid and hostile environment. It is highly adhesive and does not get washed away when exposed to water and weather. Also being electrically conductive, It can be recommended for heavy electrical applications.

This is a fully formulated Synthetic Spindle Oil especially designed for the lubrication of spindles blended with antirust and antistatic additives to provide long life and extremely low friction performance. It is a non- staning synthetic oil which does not leave any carbonaceous deposit. Due to its excellent lubricity it reduces the power requirement of high speed spindle drives.Temperature range (-400C to 1200C).

It is a semifluid, complex soap based high grade grease specially selected for its excellent response to variable speed drives to provide high antiwear and load carring capacities to the grease. It is also fortified with synergistic blend of other additives such as rust and corrosion inhibitors and antioxidants to provide an unsually good water repellency for rust protection and oxidation stability for high.

It is a synthetic grease compounded from fortified silicone oil thickened with a special lithium soap and E.P. Additives to meet the most critical Industrial applications, It is ideally suitable for very high speed and high temperature applications. It possesses an excellent, resistance to oxidation in corrosive atmosphere annd break down due to shear. It has outstanding water repellency characteristic for marine and humid atmosphere. It is far more inert and heat stable making it a life long lubricant. It is ideal for low torque bearings.

heavy duty, multipurpose extreme pressure grease containing mos2 solid lubricant

features

n

n
• extremely wide service temperature range of -20c to +180c
n
• forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces
n
• prevents metal-to-metal contact, reduces friction, wear & protects against fretting corrosion
n
• highly resistant to hot or cold water and water washout
n
• extends relubrication intervals and cuts down lubricant consumption
n
• combination of ep additives and solid film lubricants increase the load bearing capacity and provide emergency running in and boundary lubrication
n
• offers good surface protection and corrosion inhibiting properties
n
• very good performance under moderate to high loads and medium speeds under reciprocating motions
n
• makes sliding smoother and reduces operational noise
n
• increases wear life of the equipment & out performs conventional lubricants
n
• good resistance to oxidation applications
n
• use successfully for roller bearing, all types of anti-friction bearings, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
n
• for heavy duty and long term lubrication to bearings and equipment of textile processing & heavy engineering machinery.
n
• for long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.
n

n

applications

n

n
• use successfully for roller bearing, all types of anti-friction bearings, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
n
• for heavy duty and long term lubrication to bearings and equipment of textile processing & heavy engineering machinery.
n
• for long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to
n
• severe impact loads and slow operating speeds.
n

n

method of application apply on all clean sliding surfaces by normal greasing methods i.e. By brush, grease gun or dispense via centralized lubrication systems. Do not mix with other oils or grease.

Applications

• Use successfully for roller bearing, plain bearings, roller guides, threaded spindles, splined shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces, journal bearings, couplings.
• For long lasting lubrication of cams, shafts, spring, joints, steel cables and similar equipment operating under light to medium loads and low to high speeds.

Benefits

• Extremely wide service temperature range of -25°C to +120°C
• Reduces friction and wear
• Low evaporation rate increases relubrication intervals
• High load carrying capacity
• Highly resistant to hot or cold water and water washout
• Offers good surface protection and corrosion inhibiting properties
• Good resistance to oxidation
• Can be dispensed via centralised lubrication systems

Directions for Use Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralised lubrication systems. Do not mix with other oils orgrease.


GeneralUse in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


Disposal All used and unused product should be disposed of in accordance with state regulations.


Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Solid lubricant paste for effective running in, assembly, press fitting and anti seize applications

Benefits

n

n
• Extremely wide service temperature range of -25°C to +450°C (up to +630°C in areas with restricted air access)
n
• Low coefficient of friction
n
• High pressure withstanding capacity
n
• Load bearing capacity exceeds the yield point of most metals
n
• Offers protection from wear and friction
n
• Eliminates metal-to-metal contact
n
• Prevents seizure, scoring, galling, fretting corrosion and stick slip
n
• Makes disassembly easier and non-destructive irrespective of operational period or conditions
n
• Economical to use owing to its high surface coverage capacity
n
• Aids running in and provides emergency lubrication during start ups
n
• Prevents cold welding and stick slip
n
• Good affinity for metal surfaces
n

n

Applications

n

n
• As a running-in, metal priming paste for all new or rebuilt mechanical equipment such as journal bearings, gear boxes, splines.
n
• As a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.
n
• For lubrication of all sliding metal surfaces to reducewear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splines shafts, pumps,
n
• valves, threaded spindles, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings.
n
• As a metal working lubricant to prevent galling, seizure, welding and metal pick up on tools and dies in deep drawing, machining, punching, stamping, thread rolling,
n
• cold heading, waging and forging.
n
• As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.
n
• As an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.
n
• As a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling.
n

n

Method of Application Clean the sliding surfaces and friction points. Apply this paste with a brush or cloth and rub intensively on the metal surface to form a thin uniform film. Do not use in excess as is customary with greases. Do not mix with other oils or grease.

JETEX EPS-10 Spindle Oils are premium quality, highly refined lubricating oils formulated for use in high-speed, lightly loaded bearings, running at speeds of 20, 000 to 40, 000 RPMs, found in textile spinning frames and in automated machine tools. JETEX EPS-10 Spindle Oils provide excellent oxidation stability, rust protection and resistance to deposit formation. Their low viscosities reduce oil thickness, lowering operating temperatures by reducing friction. The carefully balanced anti-wear chemistry contained in JETEX EPS-10 Spindle Oils helps extend equipment life.


Applications

n

n
• textile industry where machine oil does not contact fabrics or oil staining is not an issue
n
• automatic machine tools and other applications where operating speeds are in excess of 10, 000 rpm
n

n

Features/Benefits

n

n
• excellent oxidation stability
n
• non-corrosiveness to metals
n
• excellent water separation characteristics
n
• excellent protection from rust and oxidation
n
• excellent anti-wear properties
n

n

Approvals and Recommendations

n

n
• Cincinnati Lamb P-45 (JETEX EPS-10 Spindle Oil 22)
n
• Cincinnati Lamb P-62 (JETEX EPS-10 Spindle Oil 10)
n

n

Applications:Omnigear EP Gear Oils are 100% synthetic, heavy duty industrial PAgear oils intended for enclosed gears operating under adverse loads and temperatures. A variety of seven ISviscosities covers a wide range of temperature and load conditions.


Characteristics:

• Reduced downtime due textended change intervals
• High viscosity index
• Wide temperature range -50F t+250F, depending on grade chosen
• Longer life than conventional oils.
• Intended for heavy-duty extreme pressure industrial applications.

Meets the requirements of:

• U.S. Steel 224
• David Brown S1.53.101
• AGMA 250.04
• Cincinnati Milacron
• DIN 51517 Part 3

Solid lubricants based grease paste for reducing wear and withstanding high pressures; metal free

Applications

n

n
• Highly recommended for use on all threaded and flanged connections operating at very high temperatures and corrosive conditions to enable faster and rapid non destructive disassembly after long operational periods as in autoclaves, furnace, boilers, reactors, turbines, extrusion mandrels, compressors, heat exchangers, gas generators, plastic molding machines, chemical, petrochemical, refining, iron and steel, wood manufacturing equipment.
n
• Heavy duty thread compound for studs, nuts, bolts, valve stems, spindles, exhaust pipes, cylinder and engine head screws, steam lines exposed to high temperatures, water, steam, saline, chemical and corrosive environments to provide complete protection from seizure and corrosion.
n
• Use for press fit joints, guides, sliding contact surfaces, door hinges, seals, spark plugs, springs.
n

n

Benefits

n

n
• Extremely wide service temperature range of -40°C to +1500°C
n
• Makes disassembly very easy and non-destructive even after long operational periods at high temperatures and adverse working environments
n
• High load withstanding capacity and creates an effective matrix between mating surfaces to prevent metal-to-metal contact
n
• Protects surfaces from wear and friction
n
• Good corrosion protection
n
• Lower breakout torque
n
• Prevents bolt breaking, sintering, fusion, seizure, thread striping and distortion of threads, stress cracking
n
• Low coefficient of friction
n
• Reduces wear and increases service life of components
n

n

Directions for Use Use as supplied. Never dilute or mix with other oil or grease. Clean and degrease the surface of all previous residues prior to application. With a wire brush, apply the paste in adequate quantity on the surface and right down up to the base stem of the thread. The excess paste need not be removed as it provides a good sealing effect.


General Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


Disposal All used and unused product should be disposed of in accordance with state regulations.


Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

JETEX BRG-575 HTS GREASE is a low-noise, high-speed grease for plain and rolling bearings. It consists of synthetic oil and lithium soap along with additives for protection from corrosion and oxidation. It is highlyresistant to ageing and offer low internal friction. It reduces friction and wear; increases service life of the equipment and cuts down on lubrication costs by increasing relubrication intervals.


Features

n

n
• Extremelysoft consistency
n
• Highlyoxidation stable
n
• Water-resistant & prevents corrosion
n
• Low-noise and low-friction grease
n
• Good corrosion protection
n
• Resistant to oxidation and ageing
n
• Verygood low temperature performance
n

n

Applications High speed stenter frames in textile industry, glass works, paint booths, automotive assembly lines, varnish curing booths, open chains in industry, steel plants, paper and plywood manufacturing units, ceramic processing plants, latex manufacturing plants, lubrication of all chains, clips, bearings.


Benefits

n

n
• Extremely wide service temperature range from -10°C to +250°C
n
• Very good extreme pressure properties enhance load carrying abilities and reduces frictional wear
n
• Extremely low evaporation rate at high temperatures
n
• Due to its absolute synthetic formulation, there is no carbon or resinous deposit even at high temperatures
n
• Minimised deposit formation reduces cost related to chain cleaning such as labour, production loss and downtime
n
• Lower evaporation rate reduces consumption and allows for extension of lubrication periods thereby cutting down on lubrication costs
n
• Provides superior lubrication and protection even when subjected to high temperatures and humid conditions
n
• Due to superior lubrication, power requirements are reduced resulting in both lubricant as well as energy savings
n
• Cost savings due to reduction of parts premature wearing out and replacements are also greatly increased
n
• Good adhesive properties and water resistant
n

n

Methods of Application For optimal lubrication and adhesion, clean and degrease the surface of all previous residues, lubricants or contaminants with JETEX DG-50 heavy duty degreaser. Apply to clean surface by regular oiling methods i.e. by brushing, spraying, dipping or drop feed oiling mechanisms. Allow time for lubricant to penetrate and excess lubricant to drip off before restarting operations. For new chains: Thoroughly clean prior to applying this lubricant. It is recommended to keep new chains dipped in the lubricant for 30 minutes to ensure complete penetration to all innermost points. Avoid excessive use. Do not mix or dilute with other oils or grease. Use as per instructions laid down in manufacturers manual. Replace cap after use.

Hydrraulliic HLP 32, , 46, , 68, , 100
JETEX Hydraulic HLP grades are high performance anti-wear hydraulic oils specially formulated from premium quality solvent refined base oils and high performance additives and have excellent product stability with good anti-wear performance


Application

n

n
• Lubrication of industrial machinery
n
• Hydraulic systems of mobile and construction equipment
n
• Hydraulic systems fitted with vane, gear or piston pumps
n
• Plastic injection moulding machines
n
• Medium duty compressors
n

n

Benefits

n

n
• Excellent filter life due to superior dry & wet filter ability
n
• Longer equipment life due to lower wear & tear of aggregates
n
• Reduced equipment downtime
n
• Trouble free operation
n

n

Performance standardsThey exceed the performance requirements of the following standards,

n

n
• Denison Hydraulics HF-0 Eaton M-2950-S & Eaton I-286-S3
n
• DIN 51524 Part II Class HLP
n
• Cincinnati Machine P-68, P-69 & P-70
n

Applications High speed stenter frames in textile industry, glass works, paint booths, automotive assembly lines, varnish curing booths, open chains in industry, steel plants, paper and plywood manufacturing units, ceramic processing plants, latex manufacturing plants, lubrication of all chains, clips, bearings.


Benefits

• Extremely wide service temperature range from -10°C to +250°C
• Very good extreme pressure properties enhance load carrying abilities and reduces frictional wear
• Extremely low evaporation rate at high temperatures
• Due to its absolute synthetic formulation, there is no carbon or resinous deposit even at high temperatures
• Minimised deposit formation reduces cost related to chain cleaning such as labour, production loss and downtime
• Lower evaporation rate reduces consumption and allows for extension of lubrication periods thereby cutting down on lubrication costs
• Provides superior lubrication and protection even when subjected to high temperatures and humid conditions
• Due to superior lubrication, power requirements are reduced resulting in both lubricant as well as energy savings
• Cost savings due to reduction of parts premature wearing out and replacements are also greatly increased
• Good adhesive properties and water resistant

Methods of Application For optimal lubrication and adhesion, clean and degrease the surface of all previous residues, lubricants or contaminants with JETEX DG-50 heavy duty degreaser. Apply to clean surface by regular oiling methods i.e. by brushing, spraying, dipping or drop feed oiling mechanisms. Allow time for lubricant to penetrate and excess lubricant to drip off before restarting operations. For new chains: Thoroughly clean prior to applying this lubricant. It is recommended to keep new chains dipped in the lubricant for 30 minutes to ensure complete penetration to all innermost points. Avoid excessive use. Do not mix or dilute with other oils or grease. Use as per instructions laid down in manufacturers manual. Replace cap after use.

Heavy duty, multipurpose extreme pressure grease containing MoS2 solid lubricant

• Extremely wide service temperature range of -30°C to +150°C (up to +180°C for short intervals)
• Forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces
• Prevents metal-to-metal contact, reduces friction and wear & protects against fretting corrosion
• Highly resistant to hot or cold water and water washout
• Extends relubrication intervals and cuts down lubricant consumption
• Combination of EP additives and solid film lubricants increase the load bearing capacity and provide emergency running in and boundary lubrication
• Offers good surface protection and corrosion inhibiting properties
• Very good performance under moderate to high loads and medium speeds under reciprocating motions
• Makes sliding smoother and reduces operational noise
• Increases wear life of the equipment & out performs conventional lubricants
• Good resistance to oxidation

Applications

• Use successfully for roller bearing, all types of anti- friction bearings, plain bearings, roller guides, threaded spindles, splines shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
• For heavy duty and long term lubrication to bearings and equipment of heavy engineering machinery, textile processing machines, compressors, exhaust fans, overhead cranes, mining and construction equipment, chassis of automotive and transportation fleet, sugar and cement plant machinery, rolling mills.
• For long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.

Method of Application Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralised lubrication systems. Do not mix with other oils or grease.

Heavy duty, multipurpose extreme pressure grease containing MoS2 solid lubricant for high temperatures

Benefits

• Extremely wide service temperature range of -25°C to +250°C
• Forms a solid lubricating film to provide emergency lubrication and prevents premature bearing failures caused due to lubricant starvation as a film of solid lubricants is always maintained between sliding surfaces
• Prevents metal-to-metal contact and reduces friction and wear
• Offers protection against fretting corrosion
• Highly resistant to hot or cold water and water washout
• Extends relubrication intervals and cuts down lubricant consumption
• Combination of EP additives and solid film lubricants increase
• the load bearing capacity and provide emergency running in and boundary lubrication Offers good surface protection and corrosion inhibiting properties Very good performance under moderate to high loads and high
• speeds and low speeds at reciprocating motions Makes sliding smoother and reduces operational noise
• Increases wear life of the equipment Good resistance to oxidation Can be dispensed via centralised lubrication systems Out performs conventional lubricants

Applications

• Use successfully for roller bearings, all types of anti- friction bearings, plain bearings, guides, threaded spindles, splines shafts, taper bearings, needle roller bearings, ball and socket joints, sliding and mating surfaces under vibratory or reciprocating motions, journal bearings, couplings.
• For heavy duty and long term lubrication to bearings and equipment of heavy engineering machinery, textile processing machines, compressors, exhaust fans, overhead cranes, mining and construction equipment, chassis of automotive and transportation fleet, sugar and cement plant machinery, rolling mills.
• For long lasting lubrication of cams, shafts, spring, joints, steel cables; for lubrication of small gear mechanisms exposed to severe impact loads and slow operating speeds.

Method of Application Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralised lubrication systems. Do not mix with other oils or grease.

Nickel based high temperature anti seize compound meeting purity levels for nuclear power plant equipment

Applications

n

n
• Primary applications for JETEX NS-369 is in Nuclear PoPwer lants, Steel Plants, Petrochemical & Fertilizer Units, Refineries for providing high temperature, extreme pressure, anti seize and anti corrosion lubrication for equipment as burner tips, furnace hinges, reactor bolts, studs, pipe fittings, threaded connections, flanges, pump fittings, unions.
n
• It can be used as a heavy duty anti seize thread compound for all high strength alloys, nickel alloys and stainless steel hardware or fittings to provide effective lubrication at high temperatures and prevent seizure.
n
• It can be safely used in the presence of ammonia, acetylene or vinyl monomers that are unstable in the presence of copper.
n

n

Benefits

n

n
• Extremely wide service temperature range from -30°C to +1427°C.
n
• Eliminates metal to metal contact and maintains lubrication qualities under wide variations of temperature and adverse operating conditions and prevents galling, hardening, fretting, seizure, stripping, cold-welding, sintering, fusion of threads, bolt breaking and distortion
n
• Enables faster and rapid assembly and non-destructiv disassembly even after long term exposure to high temperatures and corrosive atmospheres
n
• Does not contain any ingredients that may poison reactor catalyst beds such as copper, lead, sulfurs, chlorides, halogens, silicones
n
• Highly resistant to hot & cold water, brine water, steam, humidity, moisture, dilute acids and alkalis, rust, corrosion and oxidation
n
• Safe to be used in the presence of ammonia, acetylene and vinyl monomers which are highly unstable in the presence of copper Low friction properties reduce wear and friction to increase life of the equipment
n
• Chemically inert and does not react with metals to cause pitting, and prevents intergranular or electrolytic corrosion of high strength ferrous or non-ferrous materials
n
• Extremely recommended for use on all high strength alloys, stainless steel and nickel alloys
n
• Meets purity levels for use in nuclear class hardware
n

n

Method of Application Clean and degrease the surface prior to application. Remove all coatings, greases, dirt, grime, loose rust and scales by means of a fine thin wire. Apply Nikkel Lube liberally by means of a stiff wire brush on to the surface and evenly right down to the roots of threads. Excessive compound provides a good sealing effect and need not be removed. Do not mix with conventional oils and greases.

Stiff, non melting silicone grease compound for use as a valve lubricant and sealant

Applications

n

n
• Lubricant for O-rings, packings, rubbers, gaskets, miniature bearing seals to provide resistance to water, chemicals, oxidation and provide thermal stability
n
• Lubrication of pneumatic control valves, fire extinguishers and water softener valves
n
• Sealant and lubricant for glass joints and stopcocks in normal as well as high vacuum systems
n
• Lubricant for pressure lubricated plug valves, flow meter bearings, ceramic plug cocks
n
• Sealant for vacuum and pressure systems
n
• Sealant between synthetic rubber or plastic parts to prevent them from sticking to in vacuum or pressure systems
n
• Chemical barrier and resistant coating for chemical processing equipment
n
• Damping media for dash pots in electrical and electronic equipment
n
• Assembly agent for holding rubbers and other parts due to its highly tacky nature
n
• All ingredients comply with regulations for food grade materials
n

n

Benefits

n

n
• Wide service temperature range from -40C to + 200C Very good oxidation resistance
n
• Completely resistant to water, steam, humidity and corrosives
n
• Low Vapor pressure and low volatility
n
• Compatible with plastics, rubbers, elastomers, and other gasketing and O-ring seal materials
n
• Prevents age hardening, stress cracking and maintains resilience of plastics
n
• Non gumming, non melting and non toxic
n
• Provides good lubricating and sealing properties for rubbers and plastics
n
• Chemically inert and resistant to most chemicals, hot and cold water, vegetable and mineral oils, dilute acids and alkalis, glycerin, ethanol, methanol, butane, steam, natural gas, ethylene glycol, most organic and inorganic chemicals and aqueous solutions.
n

n

Methods of Application Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.

Heavy duty, multipurpose extreme pressure grease containing MoS2 solid lubricant
JETEX CG-100 GREASE is a highly adhesive, semi fluid extreme pressure grease for lubrication and corrosion protection of wire ropes and steel cables operating under adverse conditions of load, temperatures or environment. It penetrates rapidly through wire rope strands to leave a completely water resistant heavy duty lubricating film which provides both internal as well as external lubrication & corrosion protection. The solid lubricants prevent wearing and premature damage of internalstrands and increase the life of the wire ropes. It forms a protective and lubricating waterproof film over the surface which does not emulsify even if submerged in water.


Benefits

n

n
• Protect against heavy loads, galling, and seizing
n
• Molybdenum disulfide solid lubricant & EP additives withstand high loads and pressures
n
• Reduces wear and friction
n
• Resists vibratory shocks
n
• Does not break down or melt or fling under prolonged use
n
• Effectively provides lubrication & corrosion protection even to the innermost strands
n

n

Applications On wire ropes and steel cables in all cranes, ships, hoists, elevators especially exposed to marine environment or under adverse operating conditions.


Method of Application Apply by spraying, brush or swabbing methods. Apply onto a clean, dry and degreased surface in thin light coats. Do not over apply.

JETEX EC-111 GREASE is a synthetic grease designed specifically for providing conductivity to electrical contacts. It provides superior lubrication and offers complete protection to electrical contacts from weathering influences such as corrosion, oxidation, and moisture penetration. This soft consistency grease prevents burning, oxidation, carbonation, arcing and erosion of contact surfaces. It is non-drying and forms an invisible film between bearing or sliding surfaces to reduce frictional wear and improve life of contacts. Based on synthetic fluids, this grease is free from any mineral hydrocarbon fluids that may cause carbonation or any migrating silicones and is safe to use on all surfaces.


Benefits

n

n
• Extremely soft consistency
n
• Water-resistant & prevents corrosion
n
• Reduces contact wear and improves conductivity
n
• Increases life of equipment
n
• Acts as an anti oxidant and anti corrosion sealant
n
• Prevents spark erosion and burning
n
• Reduces cross contact seizing
n
• Preserves contacts even at high temperatures or heat
n
• Highly oxidation and chemically stable for long intervals of time
n

n

Applications

n

n
• Contacts in precision engineering.
n
• Electric contacts of all types to prevent spark erosion and burning.
n
• Contacts and equipment under severe arcing conditions and corrosive atmospheres such as battery terminals, voltage regulators, sliding contacts, relays, rheostats, bus bars, mechanical controllers, interrupters, plug sockets, over load tap changers.
n

n

Method of ApplicationBy cloth or brush. Do not mix with any other oils or grease.

JETEX EC-424 grease is a specially formulated, highly conductive lubricant cum protective agent for maintenance free lubrication of electrical contacts and linkages in high and low voltage electrical transmission equipment. It does not harden even after long-term exposure to high temperatures and exhibits excellent high temperature oxidation resistance and protection to electrical contacts from weathering influences such as corrosion and moisture. It forms a wear reducing, heat dissipating lubricating film between surfaces to increase life of contacts and equipment.


Benefits

• Highly conductive and suitable for transmission of electricity at high or low voltages
• Prevents corrosion and preserves contacts even at high temperatures or heat
• Withstands severe arcing
• Preserves contacts at high temperatures
• Permits minimum voltage drop across contacts
• Highly oxidation stable
• Very good conductor of heat and electricity
• Maintains a solid lubricating film over the surface and prevents premature wearing of contacts
• Increases life of contacts

Applications

• Lubrication of electric powered contacts at high and low voltages.
• Electrical contacts and linkages in precision engineering and circuit breakers (up to 33kV).
• Contacts and equipment under corrosive atmospheres such as battery terminals, switches, sliding contacts, relays, mechanical controllers, interrupters, plug sockets, over load tap changers.
• As a heat sink media to facilitate conduction of heat and electricity.

Method of ApplicationBy cloth or brush. Do not mix with any other oils or grease.

JETEX SWR-12 grease is based on a special highly heat stable silicone fluid and soap thickener along with additives to impart extreme pressure properties and prevent high temperature oxidation. This grease is capable of withstanding very high temperatures and maintains its consistency. It is inherently inert and possesses a high degree of shear stability and resistance to oxidation. It does not dry out, harden or melt even after long-term exposure to high temperatures and has very good resistance to water, steam, humid environments and chemicals. It is very effective for lubrication of bearings under light to moderate loads and metal and plastic surfaces.


Benefits

n

n
• Extremely wide service temperature range of -40°C to +204°C
n
• Exceptionally good oxidation resistance
n
• High shear stability
n
• Does not thin out at high temperatures
n
• Stable, chemically inactive and inherently more inert than petroleum based products
n
• Resistant to ageing, water, moisture, steam, humidity and corrosive environments
n
• Non toxic and non staining
n
• Low evaporation and does not volatile at higher temperatures
n
• Safe for use on metal, plastic and rubber components (except those made of silicone)
n

n

Applications For lubrication of rolling element bearings operating under light to moderate loads as in oven fans, exhaust motors, kiln pre-heaters, oil burners, textile slashers and driers, conveyors, washing machines, air conditioners, domestic appliances, data processing equipment, aircraft engines, radiator cooling fans, electrical motors, vacuum machines and plastic components.


Method of Application Apply on all clean sliding surfaces by normal greasing methods i.e. by brush, grease gun or dispense via centralised lubrication systems. Do not mix with other oils or grease.

It is a heavy duty grease with high quality lubricating graphite flakes and anticorrosive additives to withstand heavy loads in humid and hostile environment. It is highly adhesive and does not get washed away when exposed to water and weather. Also being electrically conductive, It can be recommended for heavy electrical applications.

This is a fully formulated Synthetic Spindle Oil especially designed for the lubrication of spindles blended with antirust and antistatic additives to provide long life and extremely low friction performance. It is a non- staning synthetic oil which does not leave any carbonaceous deposit. Due to its excellent lubricity it reduces the power requirement of high speed spindle drives.Temperature range (-400C to 1200C).

It is a semifluid, complex soap based high grade grease specially selected for its excellent response to variable speed drives to provide high antiwear and load carring capacities to the grease. It is also fortified with synergistic blend of other additives such as rust and corrosion inhibitors and antioxidants to provide an unsually good water repellency for rust protection and oxidation stability for high.

It is a synthetic grease compounded from fortified silicone oil thickened with a special lithium soap and E.P. Additives to meet the most critical Industrial applications, It is ideally suitable for very high speed and high temperature applications. It possesses an excellent, resistance to oxidation in corrosive atmosphere annd break down due to shear. It has outstanding water repellency characteristic for marine and humid atmosphere. It is far more inert and heat stable making it a life long lubricant. It is ideal for low torque bearings.