Our Products
Relays
1 Products availableHydraulic And Pneumatic Machines
1 Products availableHardware Fittings And Accessories
1 Products availableLeading Manufacturer, Supplier & Retailer of Knife Gate Cylinder, Jenesis Standards Cylinders/Actuator, Nucon Replacement Cylinder and linear positioner.
These cylinders are used in Knife Gate Valves. These cylinders come with Standard Mounting on the Cap Side of the Cylinder to be directly fit to the Knite gare Valve. Standard and Custom made mounting are also possible.
Technical Specification:
Bore Size :32mm - 6inch
Stroke :up to 200mm
End Covers :Aluminium / Mild Steel
Barrel :Al Round Tube, Mild Steel
Seals :NBR, (Optional- Viton)
Piston :Aluminium, Mild Steel
Piston Rod :EN Series & MS
Pressure :1-10 Bar
Medium :Dry Air
Application :Knife Gate Valves and Reverse Mount application
ENESIS Standard Cylinders are used in a variety of application in heavy duty Instrumentation / Mechanical sections of Chemical, Paper, Power, Rubber Plants just a name a few. As these cylinders are power cylinders they are very sensitive to the slightest input from the control room.
Technical Specification:
Bore Size :2.5 inch - 24 inch
Stroke :up to 1000mm
End Covers :Mild Steel
Barrel :Seamless Tube.
Seals :Viton, PU
Piston :Mild Steel
Piston Rod :EN Series, MS, SS
Pressure :1-10 Bar
Medium :Dry Air
Mounting :Standard and Custom mounting are available
Application :All Instrumentation/ Mechanical Sections of the any Plant.
These Cylinders are created to Cartier to the needs of existing Nucon Model Cylinder customers. These cylinders are used in a variety of application in heavy duty Mechanical sections of Chemical, Paper, Power, Rubber Plants. They are to the actual specification of Nucon standard Cylinders.
Technical Specification:
Bore Size :4, 5, 6, 8 Inch
Model Type :ZRM/ ZTM
Stroke :up to 1000mm
End Covers :Mild Steel/ Aluminium
Barrel :Al tube/ Seamless Tube.
Seals :NBR , Viton
Piston :Mild Steel/Aluminium
Piston Rod :EN Series, MS, SS
Pressure :1-10 Bar
Medium :Dry Air
Mounting :Standard and Custom mounting are available
Application :All Mechanical Sections of the any Plant especially foundry units.
Air Shifter is used in Power Take offs to engage the gears in their respective positions. This work with compressed air which is already in the available in the vehicle. The control signal is given by the driver. It is also called gear engagement cylinders. These cylinders are supplied to Major OEM's of Power Take offs.
Technical Specification:
Bore Size :32 mm
Stroke :up to 100mm
End Covers :Anodized Aluminium
Barrel :Al Round Tube, "Mickey Mouse" Section
Seals :NBR, (Optional- Viton)
Piston :Anodized Aluminium
Piston Rod :EN Series & MS
Pressure :1-10 Bar
Medium :Dry Air
Application : PTO Gear Boxes and any other pneumatic gear shifting application.
These Cylinders have a wide variety of application such us in Lift Ramps, Dump TrucksMaterial Handling equipment and Earth movers. The stroke and bore Size ranges up to 80mm Diameter and can be used for a Stoke of up to 1 meter. With a well proven design this robust cylinder can be used for a wide variety of demanding application in hydraulics. These cylinders have a wide approval rating for its durability and robustness.
Technical Specification:
Size Rage :50 - 80" Bore
Stroke Range :50 - 1000mm Stroke
Models :JH50, JH63, JH80
Application :Dump Trucks, Lift Ramps and Material handling Equipment, Earth Movers
Volume Booster is used to when the piping distance is long from the instrumentation control room to the actual working area of the actuator. To boost the actuator speed considerably. It helps in high cost reduction in the form of reduced air loss due to less working of the compressor with our compromising on the working of the actuator.
Technical Specification:
Max. Supply Pressure : 9 Kg/cm2
Max. Signal Pressure : 7 Kg/cm2
Max. Output Pressure :7 Kg/cm2
Connection :NPT / NPT 3/8
Air Flow (l/min) :600
Air Consumption (l/min) :3
Linearity :+or-1%
Hysteresis :+or-1%
Pressure Ratio :1 : 1
Material :Al Die Cast
PL 02 is a Linear Positioner suitable to be fitted on to Linear Actuator with a stroke range above 75- 800mm. Linear Positioner is used in a pneumatic circuit to control the movement of the actuator. It actually Positions the Actuator at the exact location that we require.
Technical Specification:
Control signal :0.2 - 1- 0 Bar
Sensitivity :0.25 % of signal range
Air supply :Dry instrument air
Linearity : 1% of stroke (Direct Action)
Zero Adjustment : 10%
Range Adjustment : 10%
Connections :1/8" BSP
Jenesis Control India Private Limited (Jenesis Control India Private Limited)
200-E, Sathy Road, (Behind Raja Weighbridge) Athipalayam Road Jn, Ganapathy, , Coimbatore, Tamil Nadu - 641006
Share us via
Write a Review
