Our Products

We offer a complete product range of Angle Type Seat Valves, Pneumatics Cylinder Operated Angle Seat Valves, Pilot Operated Direct Acting Solenoid Valve, Dust Collector Solenoid Valve and battery switches

Angle Type Seat Valves

Size 1/2″ to 4″ Screwed / Flange
Media Air, Water, Oil, Gas, Steam & Chemical
Body ASTM A351 Gr. Cf8 / CF8M / CF3M
Steam Packing PTFE upto 180°C, Self-compensating (Spring Loaded)
Trim / Spindle Stainless Steel 304/316/316L
Seat Soft Seat (PTFE)
Gland Packing Teflon ‘V’ seals, backed by graphite wiper seal (Self Compensating)
Body Test Pressure 24 Bar Maximum
End Connections Female Screwed to BSP or NPT / Flange / Triclover
Working Fluid Press Refer to table
Leakage Drop tight / bubble tight, class IV ANSI B 16, 104, 1976
Operating Temp. On steam – Continues 155°C, Intermittent 180°C Maximum (High Temp. above 180°C – On Request)

Size Range : 1/2″ to 4″
Actuator
Body	SS 304 Pressed
Cover Flange	ASTM A351 Gr. Cf8 (SS 304) Investment Die-Cast
Spring	Spring Steel (IS 4454 Gr. III)
Port Connection	1/4″ BSP (NPT on request)
Operating Pressure	3.5 to 7 Bar
Position Indicator	Nylon
Operating Cycles	350 to 650 Cycles / Hr.
Media	Dry Lubricated Air / Innert Gasses Asten Moisture Separators are advised to use in line

Technical Specification Table
Model	Valve Size	Orifice MM	Inlet Position	Max. Op. Press Low to Close Bar	Max. Op. Press Low to Open Bar	Flow Factor M3/hr	Air Consumption Lit/Cycle
JYCV-15	1/2″	16	N/C	16	16	4.2	0.155
JYCV-15	1/2″	16	N/O	16	16	4.2	0.155
JYCV-20	3/4″	16	N/C	16	16	5.5	0.155
JYCV-20	3/4″	16	N/O	16	16	5.5	0.155
JYCV-25	1″	23	N/C	16	16	13.5	0.161
JYCV-25	1″	23	N/O	16	16	13.5	0.161
JYCV-40	1.1/2″	34	N/C	15	15	31.9	0.172
JYCV-40	1.1/2″	34	N/O	10	10	31.9	0.172
JYCV-50	2″	45	N/C	14	16	54.5	0.184
JYCV-50	2″	45	N/O	16	12	54.5	0.184
JYCV-65	2.1/2″	62	N/C	14	16	54.5	0.184
JYCV-65	2.1/2″	62	N/O	16	12	54.5	0.184
JYCV-80	3″	75	N/C	10	10	105	0.735
JYCV-80	3″	75	N/O	10	10	105	0.735

Dimensions
Valve Type	Size		M	E	PCD	OD	T
Valve Type	Inch	mm	M	E	PCD	OD	T
JYCV.S-15	1/2″	15	72	130	60.3	88.94	11.1
JYCV.S-20	3/4″	20	75	150	69.9	98.4	12.7
JYCV.S-25	1″	25	90	160	79.4	107.4	14.3
JYCV.S-40	1-1/2″	40	125	195	98.4	127	17.5
JYCV.S-50	2″	50	152	230	120.6	152.4	19
JYCV.S-65	2.5″	63	165	216	139.7	177.8	22.2
JYCV.S-80	3″	80	170	242	152.4	190.5	23.8
JYCV.S-100	4″	100	210	293	190.5	228.6	23.8

View Complete Details

Ask Latest Price & Details

Pneumatics Cylinder Operated Angle Seat Valves

Size 1/2″ TO 4″ (15MM TO 100MM)
Type NORMALLY CLOSE
Pressure UP TO 16BAR
Media AIR, WATER, OIL, GAS, STEAM, CHEMICAL, ETC
MODEL JCYV-S & JCYV-F
BODY CF8/CF8M
MOC S.S.304/S.S.316/ S.S.316L/WCB
SEAT PTFE
TEMPERATURE 250 C MAX
AIR PRESSURE 2 TO 7 BAR
ENDS SCREWED/FLANGED

View Complete Details

Ask Latest Price & Details

Pilot Operated Direct Acting Solenoid Valve

Port Size 1/2″ BSP / NPT
Body Material Aluminum / Brass / SS-304 / SS-316
Type 2 Port, 2 Posion (NC/NO)
Circumference Temperature -10 °C to 95 °C
Media Temperature -10 °C to 250 °C
Operating Voltage AC : 230V, 110V, 48V, 42V, 24V. DC : 12V, 24V
Power Consumption AC : 8W, 12W, 17W. DC : 8W
Media Air, Water, Gas, Light Oil, Vacuum Hot, Oil, Steam

Dimension (mm)
Model No.	Port Size	A	B	C	D	E
S.S.304	1/4″	50	92	51	102	51
Aluminum	1/4″	40	74	32	90	73
Brass	1/4″	46	64	36	76	79
S.S.304	1/2″	50	92	51	108	51
Brass	1/2″	46	64	36	76	79

Technical Data Sheet

2/2 way pilot operated direct acting valve
MODEL NO.	BODY MATERIAL	PIPE (INCH)	ORIFICE (mm)	Min. Operating Pressure kg/cm2	Max. Operating Pressure kg/cm2	Seal & Diaphragm Material	Flow Factor Kv m3/hr
JDASV	Aluminum	1/4″	2	0	10	NBR	0.08
JDASV	SS-304	1/4″	4	0	15	NBR	0 .30
JDASV	SS-304	1/4″	2	0	150	NBR	0 .30
JDASV	SS-304	1/4″	3	0	10	NBR	0.36
JDASV	SS-304	1/2″	2	0	150	NBR	0 .40
JDASV	SS-304	1/2″	3	0	10	SILICON/NBR	3 .20

3/2 way pilot operated direct acting valve
JDASV	Aluminum	1/4″	2	0	10	NBR	0.08
JDASV	SS-304	1/4″	4	0	10	NBR	0 .30
JDASV	SS-304	1/4″	2	0	30	NBR	0 .30
JDASV	SS-304	1/2″	4	0	10	NBR	0.36
JDASV	SS-304	1/2″	4	0	40	NBR	0 .40

View Complete Details

Ask Latest Price & Details

Pneumatic Open Cylinder Control Valve

Size DN15 to DN200
Application Steam, Thermic Oil, Water, Chemicals
Rating ASA 150#
Body Material C.I.IS 210 Gr FG 200/ASTM A216 Gr WCB/ ASTM A 351 Gr CF8/CF8M
Type 2 way, 3 way
Yoke SG Iron
Bonnet Standard Carbon Steel Fabricated. Extension Column & Radiation Fins for 3 way Valves
End Connections Flanged according to ASA 150#
Seat S.S.304/316 Screw in Type
Plug S.S.304/316/410 ‘V’ Port Characteristics/Teflon Filled
Shaft SS.304/316 screwed in the Actuator Stem
Sealing Type Metal-to-Metal Seal/Soft Seal
Packing Box Preformed Rings in Graphoil Packings/Teflon Rings Combinations of Both
Valve Normally closed. Normally open on request
Working Pressure 10Kg/cm²
Maximum Temperature 180°C for 2 way & 400°C for 3 way Valves
Testing & Inspection Standard
Seat Leak Test 12.5Kg/cm² for 150#
Body Hydraulic Test Pressure 20Kg/cm² for 150#
Valve Mounting Horizontal
Industries Textiles, Plastics, Dairy, Pharmaceuticals, Food-Processing Petrochemicals, Lamination, Leather, Etc.

VALVE : ACTUATOR

Sr. No	SPECIFICATIONS	INFORMATIONS
1	Camber Materia	Aluminum
2	Piston	Spring Loaded Piston
3	Spring	Spring Steel
4	Stem	S.S.
5	Air Operation	50 PSI and above

MODEL	Size	F	A	A1	H	H1	D	I	K	R	R1	N	O
JDCV-F-1″	1″	185	90	145	345	345	108	11	79	51	1. 6	4	16
JDCV-F-1.5″	1. 5″	207	90	153	350	350	127	14	98	73	1. 6	4	16
JDCV-F-2″	2″	238	100	170	390	390	152	16	120	92	1. 6	4	19
JDCV-F-2.5″	2 5″	300	128	195	530	530	178	18	140	105	1. 6	4	19
JDCV-F-3″	3″	305	128	200	550	550	190	19	152	127	1. 6	4	19
JDCV-F-4″	4″	360	165	250	590	590	229	24	190	157	1. 6	8	19

View Complete Details

Ask Latest Price & Details

Stainless Steel Pressure Gauge

Brand Name JEKON
Model JPRG
Measuring Range 0 TO 10000KG/CM2

We are the leading manufacturers, exporters and supplier of this products.

View Complete Details

Ask Latest Price & Details

Dust Collector Solenoid Valve

₹ 750 /Piece Get Latest Price

Media Air, Powder/Solids
Material Aluminium
Size 4 Inches, 1/2 to 2 Inches
Temperature Of Media Medium Temperature
Coil Voltage 12V
Pressure 0.6 to 10 Bar
Features Corrosion & abrasion resistant, Sturdy construction, Low maintenance, Durable finish standards
Brand Name Jekon
Series JDCV
Application Air & Dust
Control Direct-Operated, Pilot Operated
Automation Grade Automatic
Iso Volume ISO 9001;2015
Orifice 15mm
Seals P.U
Temp 80 deg C
Body Aluminium Die Cast
Diaphragm Neoprene/Nitrite/PU
Temperature 80° C Max.(up to 125° c on request)
Available Volt. All std.voltage available

View Complete Details

Ask Latest Price & Details

Pneumatic Actuator

SIZE RANGE 1/2" TO 10"

We are leading manufacturer, exporter and supplier of Pneumatics Actuator Ball valve. The products we bring forward are engineered with exactitude by our skilled professionals who make sure to use finest grade metals and alloys in the manufacturing process. Also, we offer customization facility of the offered range at reasonable rates. Specifically designed to meet the diverse client needs, these ball valves are commended for their robustness, operational fluency and high corrosion resistance.The offered ball valve is intentionally designed with pneumatic actuator to relieve the operation of fluid handling in various chemical and waste water treatment plants. The offered ball valve is manufactured under BS 5153 standard and can be availed from us in cast iron, cast steel or stainless steel construction.

View Complete Details

Ask Latest Price & Details

Battery Switches
Get Best Quote
DANFOSS PRESSURE SWITCH
Get Best Quote

Tell Us What are you looking for? Will call you back

Contact Us

Mr. Harshad Chavda, Mr. Girish Patel (Jekon Controls)
No. 8, Shrinathji Estate, Saraspur Bridge Corner, Etavada Saraspur Bridge Corner, Etavada, Saraspur, Ahmedabad - 380018, Dist. Ahmedabad, Gujarat - 380001
Share us via
Found Something Wrong with this Listing? Report Here.