Jeetmull Jaichandlall (m) Pvt. Ltd.

Park Town, Chennai, Tamil Nadu

Screen wire mesh in different models having single, double and triple decks, depending on the requirement of customers. Vibrating screens are used in Sieving, Sorting, Grading, Sizing, Extracting, Conveying, Segregating, Granulating, Dewatering and other Separating and Filtrating Solutions.

Wire mesh screen is a reliable name in various industries that requires premium quality products. We are updated with most modern technology and equipment.

We offer a wide range of superior quality galvanized steel wire both electro dip and hot dip that is extensively used as overhead ground wire or static wires. We have firmly established ourselves as one of the prominent steel wire suppliers. It is extensively used in industries like automobile, electricelectronics, construction, tools rooms and many more applications. G.I. Wires are also used in manufacturing Wire netting, Wire mesh, Fencing, Barbing, as well as other general applications. We use highest quality raw materials for manufacturing our products. We offer to you in 4 Gauge to 30 Gauge of thickness. Bundle format of circular form weighing from 1 Kilo to 250.00 Kilo.

Chainlink is usually manufactured from Galvanised Iron , PVC coated and Stainless Steel Wires. The popularity of this fencing is due to its relatively low cost and easy for installation.

Welded Wire Mesh (WWM), a relatively new product in India. Welded Wire Mesh is used as steel reinforcement in concrete, replacing the traditional cut & bend and placing of steel TMT bars. Welded Wire Mesh is used as steel reinforcement in concrete, replacing the traditional cut & bend and placing of steel TMT bars. We supply high quality WWM with precise dimensional control. The product will result considerable savings in time, labour and money. It is an Electric fusion welded prefabricated reinforcement consisting of a series of parallel longitudinal wires with accurate spacing welded to cross wires at the required spacing. This concept is a step forward in the mechanization of reinforcement laying. It is the easiest and correct solution for achieving the requirements of quality, reliability, speed and efficiency at construction site.

Advantages of Using Welded Wire Fabrics

1. Because bars are welded in a mat, the bars do not move when concrete is placed, insuring bars are in their proper position.
2. Since WWR is prefabricated and welded in plants, the risk of missing a bar is minimized.
3. The chance of improper bending of bars is reduced by using WWR since bending machines bend the mat as a single unit
4. The use of WWR minimized the chance of misplacement since only one type of mat is used on a given section.
5. Provide the exact size of reinforcement where needed through variable bar size and spacing, thereby reduces steel waste.
6. No site space needed for steel assembly.
7. Faster erection time means you can beat changing weather conditions.
8. Removes reinforcement placement from the critical path.
9. Less field labour needed.
10. The material fabrication is automated.
11. With faster construction, insurance premiums are reduced. For example on bridge deck construction the barrier walls can be constructed faster reducing the time for fall exposure and reducing insurance premium.
12. WWR can reduce construction time, thereby saving: Crane rental time Equipment leasing Increasing bonus
13. Lower material cost because not fabricating small bar.

Concrete ReinforcementStructural Slabs & WallsWWF instead of Individual Bars makes the job of reinforcing slabs/walls for residential, office and Institutional Buildings most quick and elegant. With detailing advantages, it also results in savings of 15 to 35%

Roads / PavementsLarge area Floor labs on ground, pavements, airports, runways, aprons etc to achieve crack-free joints less surfaces. Precast MembersPrecast elements which are thin or are difficult to reinforce such as curved arch flat members, Hyperbolic Paraboloid Shells, folded plate roof girders, fins, thin pardis or chajja drops.

Chainlink Fencing is Woven in a diamond pattern and provides strong durable and flexible fencing.The wires run vertically and are bent into a Zig Zag pattern so thjat each "Zig" hooks with the wire immediately on one side and each "Zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of Fence. The closely spaced diamond mesh construction gives your Fence linear strength and springy texture. Chainlink is usually manufactured from Galvanised Iron , PVC coated and Stainless Steel Wires. The popularity of this fencing is due to its relatively low cost and easy for installation. Chainlink Fencing can be manufactured in a width of 1 Feet to 18 Feet.They normally come to you in Diamond Aperture of 1"to 8".And made out of Wire thickness of 1.60mm (16 gauge) to 5.50mm(6 Gauge). The G.I.Wires can also be PVC coated to provide aesthetic view and Greenery. Chainlink has got N limited end users.

These are basically put by Agriculture Land Fencing. Transformer Yards Forest Areas Sports Application. Residence Fencing areas. Security Purposes. Etc.

Steel mesh is a reliable name in various industries that requires premium quality products. We are updated with most modern technology and equipment.

We are manufacturing Vibrating Screens in different models having single, double and triple decks, depending on the requirement of customers.
Vibrating screens are used in Sieving, Sorting, Grading, Sizing, Extracting, Conveying, Segregating, Granulating, Dewatering and other Separating and Filtrating Solutions. 

Heavy Duty Wire Mesh Screens are specially manufactured for extremely rugged operating conditions in scalping, sizing or processing heavy abrasive materials such as ores, crushed stones, sand, gravel, metallic and non metallic minerals, coal slag etc.

The strength and free screening area advantages of woven wire screens over other screening media make them suitable for many industrial sifting and separating applications. As well as supplying to the mine and quarry Industry, the screens are used in many other areas including precious metals, ore grading, water treatment, coal preparation, foundries, waste management, agriculture and food processing.                               

Vibration Screens are made out of Spring Steel, Galvanized Iron and Stainless Steel, as per the specifications given. Vibration Screens can also be custom made from Coarse to Fine Apertures made out of Abrasion-Resistant Spring Steel, Stainless Steel, High Carbon High Tensile, GI, Mild Steel Wire etc. with or without Edge-

We offer a wide range of perforated metal sheets punched in mild steel, galvanized, aluminium, stainless steel and special alloys. Perforated material has many potential uses to industry as well as to architects and designers because its practical and aesthetic features. 

Application of perforated metal sheet :

• Food Products: Processing , Straining & filtering Tea, Coffee, Flour, Rice, Starch, Corn, Fruit Juices, Sugar Etc.
• Separating: Chemicals, Seeds, Distillery, Grains sand Foods, Wastes etc.
• Paper Making : Waste Liquor, Strainers Centrifugal, Screen Plates, Screens for Pulp Refineries, Strainers for Pulp Refineries, Digester Relief Lines etc.
• Straining : Sugar Syrup, Chemicals, Paints
• Filtering: Baby Foods etc.
• Mining: Ore Separators coal Screening, Washing Screens, Grading Sand, Crushed Stone etc.
• Laundry: Washing Machines & Dryers, Storage Racks etc.
• Brewing: Sizing Grains, Filtering etc.
• Automobile: Silencers, Filter, Industrial Filter
• Grill: Radiator, Speaker, Show Grill.
• Air-Conditioning: Acoustic Panelling.
• Other applications are aesthetics in architectural and design applications such as facades, fixtures, and privacy panels.

We bring a supreme range of Mild Steel Wire Nails. The Mild Steel Wire Nail is manufactured keeping in mind the existing market requirements hence they are available in various sizes from 1 to 4.

Expanded Metal Mesh is the most practical and economical way to assure strength, safety, and a non-skid surface. Expanded metal grating is ideal for use on plant runways, working platforms, and catwalks, as it is easily cut into irregular shapes and can be installed quickly by welding or bolting.

MS wire nails a supreme range of Mild Steel Wire Nails. The Mild Steel Wire Nail is manufactured keeping in mind the existing market requirements hence they are available in various sizes from 1” to 4”.

Features	High strength Anti Corrosive Long lasting Reliable Superior quality
Supplied To	General Piping industry Construction industry Engineering projects

Expanded Metal Mesh is the most practical and economical way to assure strength, safety, and a non-skid surface. Expanded metal grating is ideal for use on plant runways, working platforms, and catwalks, as it is easily cut into irregular shapes and can be installed quickly by welding or bolting.
It is Manufactured in Mild Steel (M.S.), Galvanized Iron (G.I.), Stainless Steel 304, 316 (S.S.) Aluminium and other metals from 0.5 mm opening to 50 mm opening in all possible thickness.
Usage:
Protecting of all kinds of machines, electrical equipment, window and aquatic product's breeding. Large application in filtration purposes. Used with concrete in buildings and construction, maintenance of equipments, making of arts and crafts, covering screen for first class sound case. Thicker sizes with apertures above also have certain general purpose applications like partitioning and covering for security. Fencing for road, railway, civil building, water conservancy's construction Heavy expanded metal can be used as step mesh of oil tanks, working platform, corridor and walking road for heavy model equipment, boiler, petroleum and mine well, automobile vehicles, big ships Also serve as reinforcing bar in construction, railway and bridge

Wire mesh/Wirecloth can offerwide ranging characteristics dependent on the configuration of wire thickness in relation to aperture size, as well as type of weave, and can vary in texture from being as fine, soft and flexible as silk to being as rigid as steel plate. Many of the properties of wire cloth are not available using alternative metal media.

We offer the full range of specifications from 2600 Micron aperture down to 1 micron nominal aperture.Manufactured in Mild Steel (M.S.), Galvanized Iron (G.I.), Stainless Steel 202, 304, 316 (S.S.), Aluminum (AL.) and other metalsin all possible thickness.

Usage:

Filtration and separation equipment Ventilation screening Radio and microwave screening Screen printing Transportation belts Speaker grills Plastic extrusion Optical lens manufacture

Catalysts Precious metal recovery Flame, heat and light diffusion, Vacuum forming Spark protection Security screens Battery manufacture Mosquito Nets

NOVOCON STEEL FIBRES : Concrete materials are very brittle when subjected to normal stresses and impact loads. There has always been a need to add reinforcement to concrete to compensate for this lack of ductility. In many cases, the concrete member is kept intact using steel bars or welded wire fabric reinforcement in one or two locations of potentially high stress. If the concrete cracks, the concrete is hinged together at those limited locations.The introduction of randomly distributed steel fibre reinforcing throughout the concrete mix transforms the hardened concrete material into a more flexible composite system. The tensile stresses of the concrete are not just compensated for in one or two locations. The concrete material is reinforced throughout the entire concrete section, in multiple directions. Steel fibre reinforced concrete is able to withstand much greater stresses, both prior to and after cracking. Homogeneously reinforced concrete has substantially greater fatigue and impact resistance than conventionally reinforced materials, greatly reducing the potential for fractures and spalling. If the concrete should crack, steel fibre reinforcement is able to minimize the crack width. All Novocon steel fibres are ASTM A820 compliant Type I steel fibres made from high tensile steel cold drawn steel wire and specially engineered for use in concrete to provide numerous quality, durability and performance enhancement Novocon steel fibres, are available in the following types. Xorex ISF Novotex and Hooked End BENEFITS : Improve flexural properties Improve fatigue resistance Improve crack control and joint stability Improve flatness indexes. Improve impact resistance, abrasion resistance and toughness of concrete. Improve shatter resistance and ductility of the concrete.Can be used as a replacement of conventional steel reinforcement in ground supported slab, composite metal deckings and shotcreting works to save cost and time and provide better quality and performance. For more details visit : http://fibermesh.com/product.aspx?name=steel+fibers

technologically most advanced plant in the world (for Synthetic fibers for concrete) to ISO 9002 and ISO 14001 quality assurance standards. Further, Fibermesh fibres are specially engineered for use in concrete and mortars as a secondary reinforcement and are designed to provide an uniform three dimensional distribution without any clogging or clumping.

Monofilaments (bundles of thin individual monofilaments) i.e. our`STEALTH fibres These are the economical fibres which can be used in general reinforced concrete, light duty industrial floor slabs, driveways and parking areas in residential / commercial buildings, aesthetic concrete elements, plasters and for preventing explosive spalling of concrete due to fire, water retaining structures etc. Available also nowStealth e3 Multidimensional graded fibres(The only of its kind in the world) which are also capable of mixing in handmixed plasters. Fine Fibrillated fibres(bundles of interconnected strands which open up during the mixing process) i.e. our`Harbouritefibres These are superior technology fibres for use in Plaster, Gunite and Precast elements and are theonly fibres in the worldwhich caneven mix in dry mortarslike gunite. Graded Fibrillated fibres(Thick bundles of interconnected strands which open up during the mixing process) i.e. our `Fibermesh Inforce e3fibres These are the worlds most advanced fibresfor use in reinforced concrete, marine structures, concrete subject to seismic forces, heavy duty industrial floor slabs, concrete pavements, water retaining structures, machine foundations, for superior concrete toughness and to provide post crack residual strength. Antimicrobial fibresi.e. our`Microblockerfibres These fibres are manufactured with an antimicrobial agent which enables the fibres to fight and prevent the growth of Thin cell wall micro organisms such as bacteria, fungi, yeast, mold and mildew in or on the concrete/mortar surface, and, most importantly, function for the life of the concrete/ mortar.

Wire meshwirecloth can offerwide ranging characteristics dependent on the configuration of wire thickness in relation to aperture size, as well as type of weave, and can vary in texture from being as fine, soft and flexible as silk to being as rigid as steel plate. Many of the properties of wire cloth are not available using alternative metal media.

Providing correct cover to rebars is of paramount importance. It guarantees proper positioning of rebars, which contributes to durability and enhanced life of the structure. Bonding between concrete spacers and the surrounding concrete is perfect. These covers are designed for easy placement & positioning of Beam and provide stability.

Technical Spec :Fabrication of Reinforcements TMT / CTD Bars confirming to IS 1786 with FE 415 / 500 Grade of various diameters to reinforced concrete work. The work includes cutting, bending, fabricating and placing in position according to drawings including supply and use of 18 guage black annealed binding wire in two strand to tie the bars in position and providing KNG Cover Blocks manufactured from Polypropylene, chemically inert for all bars to ensure specified covers according to relevant drawing and as per IS 456 – 2000.

Advantages : Precise and stable Good Bonding with Concrete Impervious Unaffected by Vibrations or Tampering Chemical Inherent Quick and easy fix Available in various Sizes

Weld mesh is manufactured from metal wires welded using an electronically controlled electric process employing the principle of fusion combined with pressure at their intersections. This gives a homogeneous section without any loss of strength or area. By using different diameter wires, it can be made into light or heavy gauge product. Because it is welded it can be cut into any shape. It cannot separate or fray and does not require tensioning in order to pull it into shape. It can be supplied in framed panels made to customer’s requirements. Its large open area gives good visibility when used as screening or for guards.

Welded Mesh is manufactured in different kinds of metals like Mild  Steel (M.S.), Galvanized (G.I.), Stainless Steel (S.S.), PVC Coated Welded Mesh

 

General Applications of Welded Mesh

For Safety  Welded mesh provides safety wherever moving machinery is involved. As machine guards or fixed safety barriers, welded mesh provides visibility together with all the protection the Health & Safety Acts require. For Storage For storage Potter & Soar welded mesh makes strong pallet sides, shelves for racking, bins, scrap containers, baskets and so on. For Building Guarding and protecting are two important areas in the building trades where mesh is invaluable. Safety guards on scaffolding, tree guards, window guards, and motorway bridge parapet guards are just a few examples. Protection of people and property is becoming more and more important in days of increasing vandalism. For  Agriculture and  Horti culture Weld mesh is extremely versatile for all sorts of applications in the farming industry. On the Poultry, Rabbit and Mink industries it is used for rearing cages. However one of the most extensive applications is for animal enclosures and not just round the farms, but in zoos, kennels, aviaries and catteries. It is also used for making silo bins, ventilation and drying ducks, trailer sides, retaining panels for barns, gates and fencing. Horticulture industries also use weld mesh for greenhouse staging, shelving, trays, plant protection, tree guards and fruit cages. It is also used for grading and sizing of all farming produce. Fencing Welded Wire Mesh offers a convenient means to quickly partition/ barricade large areas with rigid fencing. High security fencing with 3"x1/2" spacing is common for secure areas like Mints, Treasuries. The mesh is easily anchored to structural posts/angles. Floor GratingsWelded Wire Mesh is an easier alternative to plates for industrial structural flooring. It provides for lighter material and ventilation across floors  Machine GuardsWelded Wire mesh is an elegant and cost and material saving alternative to sheet metal for enclosures to machines, Electrical equipments.

Hexagonal wire mesh is also known by the name of Chicken Mesh. Hexagonal wire netting is manufactured in: Galvanized IronGalvanized Iron Drawn WireStainless SteelFeature: Good corrosion resistance and oxidation resistance. Weaving Pattern: Normal twist and Reverse twist.

Hexagonal wire mesh is also known by the name of Chicken Mesh. Hexagonal wire netting is manufactured in: Galvanized Iron Galvanized Iron Drawn Wire Stainless Steel

Feature:Good corrosion resistance and oxidation resistance. Weaving Pattern:Normal twist and Reverse twist.

Usage:

Industrial and Agricultural Constructions as Reinforcement. Reinforcement material and substrate to cement in brick less walls. In buildings as reinforcement of the roof and floor Light fencing for poultry farms, bird cages, tennis courts and fish garden, and children playground. Covering glass wool and rock wool in pipeline and boilers insulation

S.S.Wire are popularly used to manufacture S.S.Wire meshes , Book binding purposes , Railings , Designer Grills etc. Engineering, Chemical, Construction and various other industries besides having applications in manufacturing of Kitchen Wares, Utensils, Ornaments and many other applications.

LIQUI-HARD concrete densifier and chemical hardener compound is a ready-to-use, colorless liquid, formulated with chemically reactive raw materials to harden and dustproof concrete.

Welded Wire Mesh (WWM), a relatively new product in India. Welded Wire Mesh is used as steel reinforcement in concrete, replacing the traditional cut & bend and placing of steel TMT bars. Welded Wire Mesh is used as steel reinforcement in concrete, replacing the traditional cut & bend and placing of steel TMT bars. We supply high quality WWM with precise dimensional control.

We are well known for manufacturing, supplying and exporting of wide variety of polyproplene fibres.

Pozzofilz (metakaolin) is an scm that conforms to astm c618, class n pozzolan specifications. Pozzofilz hrm is unique in that it is not the by-product of an industrial process nor is it entirely natural; it is derived from a naturally occurring mineraland is manufactured specifically for cementing applications.