Post Buy Requirement
JJ
Chennai, Tamil Nadu, India
Add Review

Fibers #1067386

Steel Fibres

NOVOCON STEEL FIBRES : Concrete materials are very brittle when subjected to normal stresses and impact loads. There has always been a need to add reinforcement to concrete to compensate for this lack of ductility. In many cases, the concrete member is kept intact using steel bars or welded wire fabric reinforcement in one or two locations of potentially high stress. If the concrete cracks, the concrete is hinged together at those limited locations.The introduction of randomly distributed steel fibre reinforcing throughout the concrete mix transforms the hardened concrete material into a more flexible composite system. The tensile stresses of the concrete are not just compensated for in one or two locations. The concrete material is reinforced throughout the entire concrete section, in multiple directions. Steel fibre reinforced concrete is able to withstand much greater stresses, both prior to and after cracking. Homogeneously reinforced concrete has substantially greater fatigue and impact resistance than conventionally reinforced materials, greatly reducing the potential for fractures and spalling. If the concrete should crack, steel fibre reinforcement is able to minimize the crack width. All Novocon steel fibres are ASTM A820 compliant Type I steel fibres made from high tensile steel cold drawn steel wire and specially engineered for use in concrete to provide numerous quality, durability and performance enhancement Novocon steel fibres,
are available in the following types.
  1. Xorex
  2. ISF
  3. Novotex and
  4. Hooked End
BENEFITS :
  1. Improve flexural properties
  2. Improve fatigue resistance
  3. Improve crack control and joint stability
  4. Improve flatness indexes.
  5. Improve impact resistance, abrasion resistance and toughness of concrete.
  6. Improve shatter resistance and ductility of the concrete.Can be used as a replacement of conventional steel reinforcement in ground supported slab, composite metal deckings and shotcreting works to save cost and time and provide better quality and performance.
For more details visit : http://fibermesh.com/product.aspx?name=steel+fibers

View Complete Details

Synthetic Fibers

technologically most advanced plant in the world (for Synthetic fibers for concrete) to ISO 9002 and ISO 14001 quality assurance standards. Further, Fibermesh fibres are specially engineered for use in concrete and mortars as a secondary reinforcement and are designed to provide an uniform three dimensional distribution without any clogging or clumping.
    • Monofilaments (bundles of thin individual monofilaments) i.e. our`STEALTH fibres These are the economical fibres which can be used in general reinforced concrete, light duty industrial floor slabs, driveways and parking areas in residential / commercial buildings, aesthetic concrete elements, plasters and for preventing explosive spalling of concrete due to fire, water retaining structures etc. Available also nowStealth e3 Multidimensional graded fibres(The only of its kind in the world) which are also capable of mixing in handmixed plasters.

    • Fine Fibrillated fibres(bundles of interconnected strands which open up during the mixing process) i.e. our`Harbouritefibres These are superior technology fibres for use in Plaster, Gunite and Precast elements and are theonly fibres in the worldwhich caneven mix in dry mortarslike gunite.

    • Graded Fibrillated fibres(Thick bundles of interconnected strands which open up during the mixing process) i.e. our `Fibermesh Inforce e3fibres These are the worlds most advanced fibresfor use in reinforced concrete, marine structures, concrete subject to seismic forces, heavy duty industrial floor slabs, concrete pavements, water retaining structures, machine foundations, for superior concrete toughness and to provide post crack residual strength.

  • Antimicrobial fibresi.e. our`Microblockerfibres These fibres are manufactured with an antimicrobial agent which enables the fibres to fight and prevent the growth of Thin cell wall micro organisms such as bacteria, fungi, yeast, mold and mildew in or on the concrete/mortar surface, and, most importantly, function for the life of the concrete/ mortar.
View Complete Details

Polyproplene Fibres

We are well known for manufacturing, supplying and exporting of wide variety of polyproplene fibres.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us