Jeel Filtration Technologies

Alkapuri, Vadodara, Gujarat

SPECIFICATIONS: Application : Filtration in clean room & LAF Benches Filter class : H 10 to H 14 (HEPA) Case : Sand blasted Aluminum anodized Extruded section Media : Sub Micronic Glass Fiber Separator : Hot Melt Glue Sealant : Polyurethane based adhesive Gasket : Neoprene Rubber Initial Pressure drop : 150 Pa Recommended Final Pressure drop : 300 Pa Application Temperature : 70 Degree in continues operation

JFT Pleated Filter Cartridges are designed to optimize the surface area of the PP media for higher flow rate, lower clean Delta P and longer Service life. The Filter provides more surface area due to its pleated design. Applications for these are available across food & beverages, pharmaceutical, semiconductor and other demanding process applications. All PP construction and gradient density micro-fiber media provide excellent removal efficiencies and high contaminant holding capacities. All materials used in this filter cartridge are CFR-21 complaint so, it is safe to use for food contact purposes.

JFT STRING Wound Filters are designed and manufactured using the latest winding technology. The filter comprises a dense layer on the inner side and a coarse layer at the outer end. Due to this, it produces a superior depth filter with increased capacity, longer service life and high performance that reduce the effective cost. STRING filters have high structural integrity with huge void volume, giving a lower pressure drop. It had much-improved dirt holding capacity and efficiency compared to conventional wound filters.

JFT MAKE Sanitary Housings are designed and engineered to meet the critical needs of the Pharmaceutical

industry. The housings are mirror finished with a defined Ra value below 0.8 Um. Materials used in these

housings are safe to use for Food & beverages as well as Pharmaceutical application.

Fine filtration of fluids is a critical part of pharmaceutical processes and the quality of the housing plays a

significant role in ensuring the predetermined filtrate quality. Max-FLO Sanitary housings are designed to

meet the many requirements of these demanding applications. The housings are supplied with a surface

finish measured in terms of Ra value, suitability for CIP and SIP, integrity testing etc.

Spun Filter ismade of fine melted polypropylene, which is blown and spun in a cylinder-like form. The main function of sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles.

A coarse G4 filter isdesigned to capture pollen, fog and coarse dust particles (10m). It also captures leaves, insects, textile fibres, sand, ash, mist and hair. (Note: 10m is 0.01mm.)

A HEPA filter, which stands for High-Efficiency Particulate Air filter, is a type of mechanical air filter designed to trap at least 99.97% of airborne particles as small as 0.3 microns in diameter. HEPA filters are commonly used in various applications, including air purifiers, vacuum cleaners, HVAC systems, and medical equipment, to remove dust, pollen, mold, bacteria, and other small particles from the air.These filters are made of a dense mat of fibers, usually made from fiberglass, that capture particles through several mechanisms, including interception, impaction, and diffusion. HEPA filters are highly effective at improving air quality, making them particularly beneficial for people with allergies, asthma, or other respiratory conditions.