J.B. Engineering Works

Bawana, Delhi

We at JB Engineering Works provide Holders for all types of Round Dies Available in the market. Die Holders with the capacity of holding round dies of 3/4 inch Dies, 1 inch dies, 1 1/2 inch Dies, 2 inch Dies and others. We have all types of Tapping and Threading Holders for holding taps and dies Ready in stock and in a bulk quantity with the appropriate sizes according to the standardized Taps and Dies available in the market. We also have Attachments for Die holders which makes these Die Holders Floating which increases the Die life and makes Threading Fine.

Application Range :Due to their slender design, the Die Holder  are used primarily on our tapping machines.

Specifications :

• Simple model without length compensation. Relatively short design. Owing to the fact that this tap holder does not have a length compensation, it is necessary to make sure that the thread tapping cycle is cut "synchronically", e. g. over a leading spindle.

• The Die Holder type is in the family of quick-change tap holders utilizing the tap adapters. The holder has no length compensating features, and the feed must therefore be controlled synchronously, i. e. by a lead screw. 
  • Misalignment between tap hole and spindle.
  • Spindle runout.
  • When the spindle feed per revolution is smaller
  • than the thread pitch.
  • When the feed is not constant, e. g. when done by hand.
  • When there is the possibility of machine spindle overrun at the turning point.

We Manufacture , Trade and Export a wide range of ER Collet Mechanism Holders for Drilling and Tapping Purposes. Drilling and Tapping Holders are widely Manufactured by us for our Tapping Machines. We also manufacture Holders for CNC Lathe Machines and Vertical Machining Center Machines. These Holders are manufactured on CNC Machines and are used for precision work.

We are the leading Manufacturer, Trader and Exporter of Traub Machine and Spare Parts. We have a Wide Range of products and all the items are manufactured with the high-tech machines. All the Components are properly manufactured on the CNC Machines and properly grounded for long life.

JB PVC Pipe Threading Machine is one of the best Machines for making Internal and external Threads on PVC Pipes. This Machine comes in various models but the best model for PVC Threaduing is A60 Gear Head + Limit Switch Model. Both Interal and External threads are possible with the help of Machinery Taps and Round dies available in the market. The pillars are hardened and ground for long life as accuracy. Easy to operate , Even an unskilled person can run the machine. 1Nos. Tap Holder , 1 Nos Die Holder is provided with the machine.

We here at JB Engineering Works Provide all types of Tapping Machine tools and accessories which includes a wide range of Tap Holders, Floating Tap Holders, Drill Chuck Shank for holding Drill Chucks, Die Holders with the capacity of holding round dies of 3/4 inch Dies, 1 inch dies, 1 1/2 inch Dies, 2 inch Dies and others. We have all types of Tapping and Threading Holders for holding taps and dies Ready in stock and in a bulk quantity with the appropriate sizes according to the standardized Taps and Dies available in the market.

We Introduce ourselves as manufacturers of 'JBEW' Horizontal Tapping Threading Machine. These Machines are suitable for Inside & Outside threading (Go-Not-Go Accuracy) with taps and round split dies respectively. These machines will give good quality & production of your job. These machines run with the help of gear and provided with auto reversing system for the long life of your tools. These machines are easy in operation. Even helper can operate the machine. In all these machine, thread length can be controlled to the desired position & automatically reserved by a built-in stopper. All the shafts hardened, tempered and ground. Tail Stock moves with gun metal bushes on the hard chromed shafts. The machine is fitted on the sheets cabinet and the cast iron base plate. For holding the job traub collets (Type A-25) in its collect fixture. You can cut left & right threading with these machines. Standard Accessories :

• 3 Phase electrical motor, Reversing switch, Two Speed pulley, V belt
• 2 Nos. die holders (1" & 1 1/2), 2 Nos. Top holders, top holder's spanner.

Range :Tapping-Threading Machines Model (Horizontal)

• Model TR-20/25 (Capacity 25mm Fine Thread)
• Model TR-20/40 (Capacity 42mm Fine Thread)
• Model TR-20/60 (Capacity 60mm Fine Thread)
• Model TR-20/25 Limit Switch (Capacity 25mm)
• Model TR-20/40 Limit Switch (Capacity 40mm)
• Model Tr-20/60 Limit Switch (Capacity 60 mm)

Optional Accessories (At Extra Cost) :

• Extra
• Die Holders
• Top Holders
• Pulley
• Thru Chuck Fitting
• Jig Fixtures for holding diffcult job
• Coolant Pump
• Collets
• Wooden Box
• Lighting Lamp etc.

We here at JB Engineering Works provide Job Works on Injection Moulding Machines. We have a wide range of machines and provide products upto 400grms.

• Pitch Control Tapping Machine - Double Spindle Model , Doubles the Production with 2 Spindles , 1 Operator , 1 Motor , 1 Coolant Pump System at the same Platform.

• Machine's all Moving Parts are Hardened and ground Properly for Long Life.

• Limit Switch Mechanism is Provided for safety purpose for reducing Accidents and Taps Breakage.

• Limit Switches are easily adjustable with a stopper for increasing or decreasing the length of thread.

• This Machine provide Precision work with High Production rate as the lead screw works according to the Pitch of the Taps and Round Dies.

• Easy to Operate as after setting a particular the Job , even an Unskilled person can also Work properly.

• This Machine is a specialist for HEX Nuts as Semi and Fully Automatic Models are Also Available Machine Provides GO NO-GO Accuracy.

• Provides High Production With Low maintenance.

• Comes in Horizontal and Vertical Models.
• Internal and Outer threads are Possible with the appropriate Taps and Round Dies available in the Market.

• 2No. Lead Screw (Fitted) in the Machine , 2No. Floating Tap Holders Or Die Holders are Provided accordingly. Allen Key Set and a spanner is also provided with the machine.

• 2 HP 960 RPM or 1440 RPM Motor is fitted according to the product.

Simple, Rugged and highly efficient Micro Lathe Machines are provided by us at a very large scale. We have uniquely positioned ourselves as the most predominant micro lathe machinery manufacturer and one of the distinguished exporters from India. They are perfectly suited for Precision Turning , Facing , Drilling, Parting, Chamfering ,  Remmering etc. Our industrial micro lathe machines assist in enhancing the production process and quality of the material. It is manufactured from the superior quality raw material to ensure its long lasting life and reliability. They are in huge demand in various reputed industries, due to their high proficiency and good speed.

• Model M-25 (Capacity 25 mm.)
• Model M-32 (Capacity 32 mm.)
• Model M-42 (Capacity 42 mm.)

Driving Motors : R.P.M. (1000 to 3000) with 3 speed by pully, 1 H.P> 1440 RPM 3 phase motor or I Phase. Dimension : L 36"xW 18"xH 47" Weight : 175 kg. Approx Bed Length : 22" Note : The Specifications, designs and mechanisms in part or full are subjected to change without notice. Download

We introduce ourselves as manufacturers of "JB" (ATM) Pitch Control Tapping Machine Single Spindle (Pitch Control) This Machine has the capability of running Taps and Dies on the same machine. Internal and outer Thread with Taps and Dies are Possible. The Machine is suitable for tapping and Threading (Go-Not-Go Accuracy) with Tap & Round Split dies respectively. The machine will give good quality and production of your job. It runs with help of gear and provided with automatic and electronic reversing system for the long life of your tools. The spindle of the machine moves forward & backward automatically. This system saves the time of your worker. Your worker is only to tighten & loose the job and for keeping and lifting the job on the Jig. The machine being in vertical position, the chips (Scrap) does not fall on the job and it does not block the Tap. At the parts in the machine are tempered and well ground for long Life.
The travel of the spindle is upto 100mm (4") upward & downward Automatically with the help of lead screw. It can be controlled in the Desire position and automatically reverse by limit switch control stopper. The table of size 150mm (6") X 250mm (10") Suitable for holding the Jig fixtyre or collect fix ture. For holding the job either true chuck or collet fixture A-42 can be use. The machine is provided with one set of lead screw fitted in the machine. For extra lead screw as per your job thread requirement available at extra cost.   
This Machine Comes in two models Pitch Control Tapping Machine - Single Spindle and Pitch Control Tapping Machine - Double Spindle which provide High Production with low maintenance. This machine can be customized as per the needs and wants of the customer which can bring High production to the customer. It comes into Fully Automatic Nut Tapping Machine and Semi - Automatic Nut Tapping Machines models also. Pitch Control Tapping Machine - Double Spindle Model, doubles the production with a Single operator doing work of two machines. One operator, One Electrical Motor and working of two machines in a go.    

Standard Accessories :  1 H.P. 960 R.P.M. or 1440 R.P.M. Electrical Motor, Coolant Pump, 2 Nos. Die Holder, 2 Nos. Tap Holder, Limit Switch Panel Box, Reversing Switch, One set Tapping Bush As per Your job. V belt, One Nos. Jig Fixture For Your Job. 

Range

• J.B. Pitch Control Tapping Machine - Single Spindle
• J.B. Pitch Control Tapping Machine - Double Spindle
• J.B. Pitch Control - Horizontal and Vertical Models
• Internal and Outer Thread is possible with the appropriate Taps and Round Dies

JB Automatic Tapping Machine

• J.B. Pitch Control Tapping Machine - Double Spindle.
• J.B. Pitch Control Tapping Machine - Single Spindle.
• J.B. Pitch Control Tapping Machine - Horizontal and Vertical Models.
• Semi and Fully Automatic Nut Tapping Machines.
• Customization possible according to CUSTOMERS NEEDS.
• Internal and Outer Thread is possible with the appropriate Taps and Round Dies.
• Nut Tapping Machine
• Oil Filter Plate Tapping Machine
• Fully Automatic Nut Tapping Machines

J.B. Single Spindle Automatic Lathe & Spare Parts

J.B. Automatics are extremely versatile machines that give BIH returns or small investments. All turning jobs can be profitably handled by these automats with accuracy and precision. More and more leading companies and ancillary units are using bar automatic lathes to create infinite range of components catering to a host of industries. General Information of A-25, A-32An automat is ideally suited for the manufacturing of precision parts and components from ferrous and non-ferrous bar stock such asbolts, nuts, screws, rivets and pins etc. For use in the manufacture of automobile components, textile spares, measuring instruments and surgical components etc. The design of these machines is particularly meant for batch production and the working range can also be increased with different attachments. Machine BaseThe 12mm thickness mild steel fabricated base carries the various parts and assemblies of the machine and is designed for permanent rigidity and accuracy Standard AccessoriesCross, slide double, vertical slide set, complete electric motors & pumps gear set required spanner set, required allen key set grease gun. Additional Accessories

• Knee tool holder
• Double tool holder set
• Triple tool holders
• Rocker type toll holders
• Long turning attachment complete

Download

Before making the final dispatch of the orders, the entire range is strictly checked against varied quality parameters. If you want to purchase quality with quantity, we are the name to be reckoned with! We are affianced in making available Floating Tap Holder.

Application Range :Due to their slender design, the Floating Tap holders are used primarily on our tapping machines.

Specifications :

• Simple model without length compensation. Relatively short design. Owing to the fact that this tap holder does not have a length compensation, it is necessary to make sure that the thread tapping cycle is cut "synchronically", e. g. over a leading spindle.

• The floating tap holder type is in the family of quick-change tap holders utilizing the tap adapters. The holder has no length compensating features, and the feed must therefore be controlled synchronously, i. e. by a lead screw. The new innovative ball-floating system provides an axial parallel floating motion, and allows for tapping in less then ideal conditions, where the floating tap holder will seek to compensate for :
  • Misalignment between tap hole and spindle.
  • Spindle runout.
  • When the spindle feed per revolution is smaller than the thread pitch.
  • When the feed is not constant, e. g. when done by hand.
  • Or when there is the possibility of machine spindle overrun at the turning point.

We JB Engineering Works also Manufacture Machines for Oil Filter Plates.

We Manufacture Single Spindle Tapping Machine  , Double Spindle Tapping Machine , Multi Spindle Tapping Machine , Horizontal Tapping Machine and other Special Purpose Machines for Oil Filter Plates.

This Machine is specially designed for high speed and low rate threads for Oil Filter Plates

We can make timely delivery of bulk as well as retail orders courtesy a wide vendor, distributor and logistic service provider base. The product basket we deliver is available in Delhi(India) and across the nearby markets ensuring complete customer satisfaction.

Salient Features

• Gear driven machine gives high efficiency and long life to machine than the conventional clutch and v-belt system machines available in market.
• This machine is simple to operate and with high out put precision machine.
• A heavy duty closed grain cast iron machine body gives vibration free and distortion free operations.
• All moving parts are precision ground; this gives long accurate working life.
• A clutch assembly through gear drives the spindle which in turn rotates in both directions (anti-clock and clock wise) with the help of friction clutch. This is designed to return in higher speed in reverse direction after clock wise tapping operations. helps in perceptible feel of the force exerted on the tap thus reducing tap breaking due to excessive force exerted.
• Tapping depth can be adjusted with the help of adjustable screw provided with the operating lever.
• The working table can b e lifted, lowered and swiveled by hand with the help of rack & verm gear.

We are a prominent name in the domain for CNC Turned Components and Job Works on CNC Machines. We are expert in cutting and finishing surgical items, automobile parts, flange yoke, ball pins, and any type of turning components. We have advanced CNC Machines to come up with high precision CNC Turned Components having close tolerance (up to 10 microns). We complete the jobs strictly as per customer’s specifications. We also undertake CNC Job Works for bars, flats, forgings, casting of any kind of material like steel, aluminum, brass, stainless steel etc. We are here to serve you with better quality CNC Job Works within great accuracy and on time. We have a Big Space for keeping the raw material and Finished good properly. We have a wide Range of CNC Lathe Machines.