Suspended Permanent Magnetic Overband Separators are designed to eliminate tramp metal from the product carried by belt, vibratory feeders or inclined planes.Over bands are mainly used to protect Machine such as Crushers, Shredders and others, to remove ferrous particles and purify products ( Industries like Foundries, Coal Mines, Cement Works, Food, Sponge Iron, Char coal, Glass, Chemical Industries and Domestic waste recycling Plants.)The permanent Magnetic Overband Separators are used when an automatic Removal of ferrous contamination is necessary. If not, fixed Permanent Suspension Magnets are more suitable.The speed of the belt , the nature of the product, its density, its granulometry and the size of the pieces which have to be extracted are on of the parameters to be taken into consideration when choosing the type of Overband. The Magnet is made of High Intensity Stroncium Ferrite Magnets and is guaranteed for the Magnetic Power through out the life of installation. A Non - Magnetic Stainless steel Plate is provided to cover the poles of Magnet. There is no need for any electrical supply or maintenance.

These are widely used in ceramic industries & are supplied along with aluminumstainless steel funnels. The magnetic rod in corporate modern anisotropic permanent magnets. Iron contamination in ceramic body & glaze is in the form of small particles and are removed when it passes through uniform gap between funnel & magnet. Following standard Sizes are available. Special sizes can be also supplied. FUNNEL MAGNET CONSISTS OF HIGH COROCIVITY MODERN ANISOTROPIC PERMANENT MAGNET LIKE FERRITE RARE EARTH MAGNET,

High Intensity Rare Earth Magnetic Equipments are assembled using Rare Earth Nd-Fe-B Magnets having 4 - 5 times more strength compared to Ceramic Alnico Magnetic Assemblies. the products are most useful for removing weakly magnetic or fine Iron Contamination from Dry or liquid products. These equipments are most useful for Food, Chemicals, Minerals & Refractories etc.RE Tube Magnets are used to remove Iron Contamination from liquids or dry Bulk material for quality control check. Magnetic Tubes are available in Standard length of 150, 200 and 300 mm with solid, Threaded or with Studded ends.

Permanent channel Magnet are used for the removal of iron from less strongly contaminated material from material like Rice, Flair, glaze, Slip (ceramic material) , Glass, Mineral powder, Slurry, Chemical, Liquid material , Food products for any kind material processing machine or machine outlet.

The permanent magnetic channel are designed in various sizes & strength to meet the specific operation and plant condition. The channel magnet can ideally be used to remove tramp iron from material carried in chute. It is very useful for chemical slurry.

Jaykrishna Suspension Type Magnets are most useful for products carried by the Belt Conveyors.

Use of Suspension Type Magnets is recommended for products with low contamination. However if the frequency of the impurities is too high, these will make a layer shunting magnetic field. The equipment will require frequent cleaning. For such applications Over Band type Magnetic Separator is recommanded.

The main applications are for the processing of Bulk products such as Sugar, Coal, Minerals, Cereals, Coffee, Glass, Culets etc.

Permanent Magnetic Plates are designed in various sizes & strengths to meet with specific operation & plant conditions. Magnetic Plates are widely used for removing Tramp iron such as Bolts, Nuts, Bits of Wire, Nails and other casual containmination from free flowing materials to protect against occasional damage to the plant caused by bits of iron.Plate Magnets can ideally be used to remove tramp iron from the moving material carried in chutes ducts, spouts or on conveyor belts, screens and feed trays. Whether the material is plastic or paper pulp, food or fertilizer, Oil seeds or gains the result is sure protection of processing machinery and iron free final products.

Rare Earth Magnetic Plates are designed for installation in feed chutes or for suspension over the flow of material for removed of weakly magnetic/fine iron impurities. There are widely used for Food, Chemicals, Minerals or Ceramic Slips and Glazes.

Rare Earth Chutes ( Channel Type Magnet ) are also available to custom built requirements.

The Permanent magnetic trap (filter ) are use for filtration of iron particles from products in liquid form. They are also frequently used in hydraulic circuits in cooling systems. Magnetic system is built up either of anisotropic ceramic or High intensity Rare Earth magnets. The Magnet unit is enclosed in stainless steel or M.S.Housing making it suitable using in chemical , Paper & Ceramic industry. The Magnetic unit is easily removable from the S.S. enclosure by loosening a few quick release fasteners. For the removal of low magnetic particles or oxidized iron is removed, a system with High Intensity Rare Earth Magnets is recommended.

Sailent Features : THE PERMANENT MAGNETIC TRAP CONSISTS OF HIGH COROCIVITY MODERN ANISOTROPIC PERMANENT MAGNET LIKE FERRITE / RARE EARTH MAGNET. STRONG & RUGGED CONSTRUCTION WITH M . S & S . S. 304/316 CONSTRUCTION.

Grill magnets are important magnetic separators, used for separating tramp iron or ferrous contaminants from free flowing granular materials. Our grill magnet is made of rare earth magnets or ceramic magnets. The magnetic grills are aligned in certain angles that attract the contaminants. Available in various shapes and sizes, our grill magnets have wide applicability in various industries like chemical industries, food processing industries, mining and mineral industries

This type of ferrous metal removal unit can be fitted simply in existing pipe line or outlet of various equipments like pulverisor, blenders, & classifier or any other outlet location. In standard type each unit comprises to permanent magnetic grids mounted one above the other. system with multiple grids are available for special application. The grids are easily removable for cleaning. The drawer is fitted with flanges at outlet. As standard the magnetic rods consisting hard ferrite ceramic magnets or high intensity rare earth magnet is fitted in a sturdy steel housing. Model with stainless steel grids and housing can be supplied if required.

  

Type J566-LM/WC is the most Handy, efficient and Economical device to separate iron Contamination from Foundry scrap sand & Plastic granules. Made from High Coercively permanent magnets. Most useful for foundry, Plastic Industry & Scrap dealers. Size of the magnetic plate is 140mm (W) X 170 mm (L) X 25 mm height. Non magnetic stainless steel bumping plate facilitates to remove iron from the magnet which is collected from scrap or any other material.

Magnetic Humps :

Magnetic Humps are used where the flow of material is vertical. The material falling strikes directly on the first magnet changes direction and falls over the second magnet, ensuring clean outflow of material. The Magnets are of Hinged type and can be easily opened for periodic cleaning. Hump Magnets can be supplied to suit any size of Pipe/Duct.

Type J566-LMWC is the most Handy, efficient and Economical device to separate iron Contamination from Foundry scrap sand & Plastic granules. Made from High Coercively permanent magnets. Most useful for foundry, Plastic Industry & Scrap dealers. Size of the magnetic plate is 140mm (W) X 170 mm (L) X 25 mm height. Non magnetic stainless steel bumping plate facilitates to remove iron from the magnet which is collected from scrap or any other material.

RE Magnetic Grids are designed for installation in Hoppers, Feed Holes and duct etc. The Grids consists of Rare Earth Tubes assembled in Single, Double or Multiple bank as required and can be supplied in square circular or any other size to suit customer requirements.

This is a unique device to protect Plastic Extrudes/Moduling Machines against iron contamination such as Nuts, Nails, Iron Bits etc. and ensure the trouble free and smooth operation of the machine. Four standard sizes both in Round and square are available and can be selected on the basis of the size and shape of Hoppers. High power Magnetic Rods are provided which prevents any iron material to enter in to the Machine. Special size Hopper Magnets are also supplied. Most useful for Plastic, rice Mill, Flour Mills, Cattle feed & Guar Gum industries. Available in S.S. 304/316 construction also for Dyes & Chemical Industries.

These are widely used in ceramic industries & are supplied along with aluminum/stainless steel funnels. The magnetic rod in corporate modern anisotropic permanent magnets. Iron contamination in ceramic body & glaze is in the form of small particles and are removed when it passes through uniform gap between funnel & magnet. Following standard Sizes are available. Special sizes can be also supplied.

Suspended Permanent Magnetic Overband Separators are designed to eliminate tramp metal from the product carried by belt, vibratory feeders or inclined planes.Over bands are mainly used to protect Machine such as Crushers, Shredders and others, to remove ferrous particles and purify products ( Industries like Foundries, Coal Mines, Cement Works, Food, Sponge Iron, Char coal, Glass, Chemical Industries and Domestic waste recycling Plants.)The permanent Magnetic Overband Separators are used when an automatic Removal of ferrous contamination is necessary. If not, fixed Permanent Suspension Magnets are more suitable.The speed of the belt , the nature of the product, its density, its granulometry and the size of the pieces which have to be extracted are on of the parameters to be taken into consideration when choosing the type of Overband. The Magnet is made of High Intensity Stroncium Ferrite Magnets and is guaranteed for the Magnetic Power through out the life of installation. A Non - Magnetic Stainless steel Plate is provided to cover the poles of Magnet. There is no need for any electrical supply or maintenance.

These are widely used in ceramic industries & are supplied along with aluminumstainless steel funnels. The magnetic rod in corporate modern anisotropic permanent magnets. Iron contamination in ceramic body & glaze is in the form of small particles and are removed when it passes through uniform gap between funnel & magnet. Following standard Sizes are available. Special sizes can be also supplied. FUNNEL MAGNET CONSISTS OF HIGH COROCIVITY MODERN ANISOTROPIC PERMANENT MAGNET LIKE FERRITE RARE EARTH MAGNET,

High Intensity Rare Earth Magnetic Equipments are assembled using Rare Earth Nd-Fe-B Magnets having 4 - 5 times more strength compared to Ceramic Alnico Magnetic Assemblies. the products are most useful for removing weakly magnetic or fine Iron Contamination from Dry or liquid products. These equipments are most useful for Food, Chemicals, Minerals & Refractories etc.RE Tube Magnets are used to remove Iron Contamination from liquids or dry Bulk material for quality control check. Magnetic Tubes are available in Standard length of 150, 200 and 300 mm with solid, Threaded or with Studded ends.

Permanent channel Magnet are used for the removal of iron from less strongly contaminated material from material like Rice, Flair, glaze, Slip (ceramic material) , Glass, Mineral powder, Slurry, Chemical, Liquid material , Food products for any kind material processing machine or machine outlet.

The permanent magnetic channel are designed in various sizes & strength to meet the specific operation and plant condition. The channel magnet can ideally be used to remove tramp iron from material carried in chute. It is very useful for chemical slurry.

Jaykrishna Suspension Type Magnets are most useful for products carried by the Belt Conveyors.

Use of Suspension Type Magnets is recommended for products with low contamination. However if the frequency of the impurities is too high, these will make a layer shunting magnetic field. The equipment will require frequent cleaning. For such applications Over Band type Magnetic Separator is recommanded.

The main applications are for the processing of Bulk products such as Sugar, Coal, Minerals, Cereals, Coffee, Glass, Culets etc.

Permanent Magnetic Plates are designed in various sizes & strengths to meet with specific operation & plant conditions. Magnetic Plates are widely used for removing Tramp iron such as Bolts, Nuts, Bits of Wire, Nails and other casual containmination from free flowing materials to protect against occasional damage to the plant caused by bits of iron.Plate Magnets can ideally be used to remove tramp iron from the moving material carried in chutes ducts, spouts or on conveyor belts, screens and feed trays. Whether the material is plastic or paper pulp, food or fertilizer, Oil seeds or gains the result is sure protection of processing machinery and iron free final products.

Rare Earth Magnetic Plates are designed for installation in feed chutes or for suspension over the flow of material for removed of weakly magnetic/fine iron impurities. There are widely used for Food, Chemicals, Minerals or Ceramic Slips and Glazes.

Rare Earth Chutes ( Channel Type Magnet ) are also available to custom built requirements.

The Permanent magnetic trap (filter ) are use for filtration of iron particles from products in liquid form. They are also frequently used in hydraulic circuits in cooling systems. Magnetic system is built up either of anisotropic ceramic or High intensity Rare Earth magnets. The Magnet unit is enclosed in stainless steel or M.S.Housing making it suitable using in chemical , Paper & Ceramic industry. The Magnetic unit is easily removable from the S.S. enclosure by loosening a few quick release fasteners. For the removal of low magnetic particles or oxidized iron is removed, a system with High Intensity Rare Earth Magnets is recommended.

Sailent Features : THE PERMANENT MAGNETIC TRAP CONSISTS OF HIGH COROCIVITY MODERN ANISOTROPIC PERMANENT MAGNET LIKE FERRITE / RARE EARTH MAGNET. STRONG & RUGGED CONSTRUCTION WITH M . S & S . S. 304/316 CONSTRUCTION.

Grill magnets are important magnetic separators, used for separating tramp iron or ferrous contaminants from free flowing granular materials. Our grill magnet is made of rare earth magnets or ceramic magnets. The magnetic grills are aligned in certain angles that attract the contaminants. Available in various shapes and sizes, our grill magnets have wide applicability in various industries like chemical industries, food processing industries, mining and mineral industries

This type of ferrous metal removal unit can be fitted simply in existing pipe line or outlet of various equipments like pulverisor, blenders, & classifier or any other outlet location. In standard type each unit comprises to permanent magnetic grids mounted one above the other. system with multiple grids are available for special application. The grids are easily removable for cleaning. The drawer is fitted with flanges at outlet. As standard the magnetic rods consisting hard ferrite ceramic magnets or high intensity rare earth magnet is fitted in a sturdy steel housing. Model with stainless steel grids and housing can be supplied if required.

  

Type J566-LM/WC is the most Handy, efficient and Economical device to separate iron Contamination from Foundry scrap sand & Plastic granules. Made from High Coercively permanent magnets. Most useful for foundry, Plastic Industry & Scrap dealers. Size of the magnetic plate is 140mm (W) X 170 mm (L) X 25 mm height. Non magnetic stainless steel bumping plate facilitates to remove iron from the magnet which is collected from scrap or any other material.

Magnetic Humps :

Magnetic Humps are used where the flow of material is vertical. The material falling strikes directly on the first magnet changes direction and falls over the second magnet, ensuring clean outflow of material. The Magnets are of Hinged type and can be easily opened for periodic cleaning. Hump Magnets can be supplied to suit any size of Pipe/Duct.

Type J566-LMWC is the most Handy, efficient and Economical device to separate iron Contamination from Foundry scrap sand & Plastic granules. Made from High Coercively permanent magnets. Most useful for foundry, Plastic Industry & Scrap dealers. Size of the magnetic plate is 140mm (W) X 170 mm (L) X 25 mm height. Non magnetic stainless steel bumping plate facilitates to remove iron from the magnet which is collected from scrap or any other material.

RE Magnetic Grids are designed for installation in Hoppers, Feed Holes and duct etc. The Grids consists of Rare Earth Tubes assembled in Single, Double or Multiple bank as required and can be supplied in square circular or any other size to suit customer requirements.

This is a unique device to protect Plastic Extrudes/Moduling Machines against iron contamination such as Nuts, Nails, Iron Bits etc. and ensure the trouble free and smooth operation of the machine. Four standard sizes both in Round and square are available and can be selected on the basis of the size and shape of Hoppers. High power Magnetic Rods are provided which prevents any iron material to enter in to the Machine. Special size Hopper Magnets are also supplied. Most useful for Plastic, rice Mill, Flour Mills, Cattle feed & Guar Gum industries. Available in S.S. 304/316 construction also for Dyes & Chemical Industries.

These are widely used in ceramic industries & are supplied along with aluminum/stainless steel funnels. The magnetic rod in corporate modern anisotropic permanent magnets. Iron contamination in ceramic body & glaze is in the form of small particles and are removed when it passes through uniform gap between funnel & magnet. Following standard Sizes are available. Special sizes can be also supplied.