Model No.:JB/IITUM/304
Bezel
Clear plastic face
Precision litho-printed scale
Red tipped pointer
Pointer stops
"Wishbone" assembly
Jeweled bearings
Zero adjustment screw
Helix
Samarium Cobalt magnet
Calibrated range spring
Silicone rubber diaphragm
Die cast
Blowout plug
O-ring seal
Product Overview
Select the Magnehelic Gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.
The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Model No.:JB/RLG/405
Suitable for high temp & press application & corrosive, colourless liquid under critical conditions.
Liquid chamber C.S./S.S.304/S.S.316
Cover plate C.S/M/S/
End fittings CS/S.S.304/S.S.316
Nut bolts Alloy Steel Glass Toughned Borosilicate
Packing Neoprene/Caf/Teflon
Valve body S.S. 304/ S.S.316
Press rating 75kg/cm
Temp 300 C
Range 0-3 metre.

Model No.:JB/SMTLG/408Tubular level gauge directly indicates liquid level in almospheric or pressurised tanks. It is a simple and reliable device mounted parallel along the side of tank.Material of Wetted part C.S./S.S.304/S.S.316/PP/PVC/Rubber Teflon LinnedGlass Tube Heavy wall borosilicate glass 19mmPressure rating 10kg/CMRange 0-3 metreScale M/C engravd on backelite sheet graduated in cm Features Isolation valves of C.S./S.S.304/PP

Model No.:JB/IITUM/304
Bezel
Clear plastic face
Precision litho-printed scale
Red tipped pointer
Pointer stops
"Wishbone" assembly
Jeweled bearings
Zero adjustment screw
Helix
Samarium Cobalt magnet
Calibrated range spring
Silicone rubber diaphragm
Die cast
Blowout plug
O-ring seal
Product Overview
Select the Magnehelic Gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.
The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Model No.:JB/RLG/405
Suitable for high temp & press application & corrosive, colourless liquid under critical conditions.
Liquid chamber C.S./S.S.304/S.S.316
Cover plate C.S/M/S/
End fittings CS/S.S.304/S.S.316
Nut bolts Alloy Steel Glass Toughned Borosilicate
Packing Neoprene/Caf/Teflon
Valve body S.S. 304/ S.S.316
Press rating 75kg/cm
Temp 300 C
Range 0-3 metre.

Model No.:JB/SMTLG/408Tubular level gauge directly indicates liquid level in almospheric or pressurised tanks. It is a simple and reliable device mounted parallel along the side of tank.Material of Wetted part C.S./S.S.304/S.S.316/PP/PVC/Rubber Teflon LinnedGlass Tube Heavy wall borosilicate glass 19mmPressure rating 10kg/CMRange 0-3 metreScale M/C engravd on backelite sheet graduated in cm Features Isolation valves of C.S./S.S.304/PP