Jayant Engineering

Chhatral, Gandhinagar, Gujarat

A butterfly valve is much smaller than other valve design.Its advantages are saving in materials, less weight, small space requirement, andeasy installation and operation. The liner materials used in the construction ofJAYANT butterfly valve are either Elastomer or TEFLON.Wafer construction provides maximum strength under conditions of pipeline strain.JAYANT butterfly valve performs the basic functions of flow, one is stopping the flow, second is Controlling flowand third is regulating flows and pressure with several advantage functions such as:

• Tight shut off
• Less fluid resistance achieved through amooth flow
• Low pressure drop.
• On-off ot throttling application
• Suitable for automation with low operationg torque and 90 deg. Operating angle.
• Reduced weight and installation space.
• No flange gasket
• Quick fitting and dismantling
• Easy replacement and renewable seat.

• Concentric rubber lined
• 2 piece split body ptfe lined
• Double eccentic high perfomance
• Tripple eccentic high perfomance
• Lever , gear operated Electic actuator , pneumatic actuator
• Wafer type , lug type , double flanged

• Design and Manufacturing :
• API 609 , BS EN 558 , DIN 3202, ISO 5752
• FLANGE :
• ANSI , BS , DIN , ISO, UNI , JIS, AS
• PRESSURE RATING:
• TRIPPLE ECCENTIC HIGH PERFOMANCE DN40-300: PN16 (200 PSI)
• DN350 & ABOVE: PN10 (150 PSI)
• TESTING: API 598 , MSS SP 61 , ANSI B16.104

We are the main supplier of this product.

• Design and Manufacturing : API 6D
• Inspection and Testing : API 6D
• End Flanges dimension : ASME B 16.5
• BW end Dimension : ASME B 16.25
• Face to Face & End to End Dimension : API 6D/ASME B16.10
• Disc Design : Gravitational acceleration
• Design : Capability of a value to permit the unrestricted passes of Piggability
• Drain & Vent Connection, Lifting Lugs & Support Legs

• Counter Weight arrangement
• Hydraulic Cylinder Arrangement
• NACE MR 0175 & MR 0103
• Drain & Vent connction, lifting lugs & Support legs.

• design and manufacturing : bs 1868
• inspection and testing : api 598 , bsen 12666 part 1 & 2
• end flanges dimension : asme b 16.5(for nps 24) series a & b (for nps 24), mss sp 44 (for nps 24)
• bw end dimension : asme b 16.25
• face to face & end to end dimension : asme 16.10, bs 2080
• special features :
  • counter weight arrangement
  • hydraulic cylinder arrangement
  • ibr certified
  • nace mr 0175 & mr 1030
  • lift type check valves will be supplied for the sizes for nps < 2 rest of the sizes are in swing type design.
• gasket design : asme b 16.20
• disk design : gravitational acceleration
• while not a valve in the traditional sense, check valves serve an important application namely to prevent flow in one direction while allowing it in the other. A check valve is self-actuated and designed to prevent fluid from flowing back into the system (prevent reverse flow). Real-life applications include preventing back flow into an injection line or into a pump. The fluid flow opens the valve by forcing a disk or ball in one direction. When the flow stops, the disk or ball is seated and closes the valve. They can be installed in horizontal or vertical upward flow piping.

• Design and Manufacturing : API 6D
• Inspection and Testing : API 6D
• Inspection and Testing : API 6D
• End Flanges dimension : ASME B 16.5
• BW end Dimension : ASME B 16.25
• Face to Face & End to End Dimension : API 6D ASME B 16.10
• Design : SLAB Type, Through conduit passage Piggable Anti-friction ball thrust bearing in yoke sleeve Drain & Vent Connection, Lifting Lugs & Support Legs, Double block & bleed, fire safe design.
• SPECIAL FEATURES :

1. Gear Operation applied force exceeds 350N
2. Limit switch Arrangement
3. Electrical & Pneumatic Arrangement
4. Position indicator
5. Locking arrangement
6. Fugitive Emission test
7. Resilient seal.
8. NACE MR 0175 & MR 0103
9. Pneumatic Acuator