Product / Services
Post Buy Requirement
JS

Jay Shakti Machine Tools.
Metoda, Rajkot, Gujarat

Write a Review
Call Now Call Now

Our Products

  1. Generators, Turbines & Power Plants 3 Products available

  2. Roll Forming & Bending Machines

    2 Products available

  3. Crusher, Shredder & Presses

    2 Products available

  4. Hydraulic Machines

    1 Products available

Our Products

Hydraulic Fix Rake Angle Shearing Machine

Hydraulic Fix Rake Angle Shearing Machine

JSMTHydraulic Guillotine Shearing Machine with FIXED RAKE ANGLE is designed to suit sheet metal industries using thin sheets.

FRAME : Rigid steel frame ofJSMTshears are optimally designed to avoid weak sections at load support & is of interlocked design. The table of frame is welded together with support of steel plates .The table top surface is machined with the provision of t-slot to facilitate front gauge stopper . Ram assembly is welded with steel plate support.
ROLLER GUIDES : The upper beam is guided by three points roller guides. A replaceable hardened liner is provided for minimum wear. It eliminates lubrication of guides.
HYDR. POWER PACK : Hydraulic system is mounted at top at rear side of machine. Hydraulic components are of internationally reputed makers like Vickers, Dowty, Rexroth etc. valves are mounted on a compact manifold block minimizing piping and chances of leakages. For oil cooling sufficient size of oil reservoir is provided.
CYLINDERS : Cylinders are precisely honed & are fitted with hard chromed piston rod with best quality sealing elements. Cylinders are connected with upper beam (cutting beam).
HYDR. HOLD DOWN : hydraulic hold down pads hold the sheet securely to avoid slipping & bowing resulting in clean square cut. Hold down units are provided for better clamping while cutting narrow strips.
STROKE : The same is adjusted with help of stroke setting rod & limit switches.
BLADE CLEARANCE : Blade clearance can be adjusted manually by lever on each side of machine with calibration of clearance suitable for thickness.
BACK GAUGE : Hand operated back gauge is provided.
BLADES : JSMTshears are provided with high quality, single segment (HcHcr) blades for longer tool life. Easy in assembling of blade reduces down time. The blades are four edged.
OPERATION : The machine can be operated by push button or by foot switch. When foot switch is pressed Hold Down plungers come down & Upper beam start shearing operation. If foot switch is released at any point of shearing, the upper beam will return back from that point.
FINGER GUARD : Fitted in front of hold down for operator's protection without obstructing viewing.
STANDARD ACCESSORIES:
  • Electric control panel with push button
  • Foot switch
  • Manual back gauge
  • Front scale gauge
  • Blades (HcHcr)
  • Instruction and maintenance manual
  • Electric motor
  • Blade clearance arrangement
  • T-slot front supporters
  • Stroke adjustment rod with limit switch
  • Hydraulic hold down system

MODEL CUTTING CAPA.IN M.S(L*T) RAKE ANGLE (FIXED) IN DEGREE STROKES PER MIN (APP) NO OF HOLD DOWN BACK GAUGE (MANUAL) MOTOR H.P OVERALL DIMENSION (APP) IN MM
LENGTH BREADTH HEIGHT
JSHS-1 1525X2 1 25 7 750 3 2200 1900 1900
JSHS-2 2030X2 1 20 8 750 3 2600 1900 1900
JSHS-3 2540X2 1 20 11 750 3 3200 1900 1900
JSHS-4 1525X4 1.20 20 7 750 5 2250 2000 2000
JSHS-5 2030X4 1.20 20 8 750 7.5 2650 2000 2000
JSHS-6 2540X4 1.20 20 11 750 7.5 3250 2000 2000
JSHS-7 3125X4 1.20 20 13 750 10 3850 2100 2100
JSHS-8 4000X4 1.30 20 18 750 12.5 4500 2200 2200
View Complete Details
Ask Latest Price & Details
Hydraulic NC Control Press Brake

Hydraulic NC Control Press Brake
Frame :- Frame is of robust fabricated steel construction of rigid & interlocked design. It is strain-free and supports the ram and bed. Pneumatic Clutch & Combined Brake Linked with the flywheel engages every time when the foot switch or both hand is Pressed.
Cranck Shaft :- It is made of special EN8 high tensile steel machined and ground to highest degree of accuracy.
Bearings :- Bush Bearings of high grade Gunmetal machined to almost grade of accuracy with provision of oil grooves to ensure a proper fill of oil lubricant for smooth running of the machine in all conditions.
Knock Out :- Presses above 10 Tons capacity are fitted with knock-out Brackets for stopping down the parts drawn, thus facility the work.
Ram :- Ram is of rigid construction of high tensile cast iron/cast steel with round die shanke hole and clamp.It can be tightend by means of the screws on the side.The slide can be adjust the stroke as desired with out hit and trial method.
Stroke :- Power presses are manufactured with adjustable stroke. Amultiple Claw Sleeve with graduation is provided to get the required adjustment in the Stroke.Operator can adjust the stroke as desired without hit and trial method.
Fly Wheel :- Made of high grade C.I. and designed to generated the maximum energy.

CAPACITY 10 20 30 40 50 60 75 100 150 200 250
Crank Shaft dia 63 76 83 95 101 108 121 134 145 160 170
Stroke Adjustment 06-50 13-76 13-89 13-95 13-102 13-102 13-115 13-127 13-152 13-165 13-165
Max. Dist Bolster To Ram (SUAU) 215 255 300 375 400 440 480 505 610 710 750
Slide Adjustment 25 38 38 38 45 45 45 51 51 51 63
Slide face (FB x LR) 101 x 260 140 x 310 165 x 330 170 x 365 210 x 380 210 x 380 235 x 450 280 x 560 315 x 600 340 x 625 360 x 700
Punch Hole(Dia x Deep) 25 x 45 32 x 50 38 x 65 45 x 76 51 x 85 51 x 85 55 x 95 63 x 102 63 x 110 63 x 110 63 x 110
Throat distance 127 152 178 203 260 280 292 318 369 420 450
Size Of Table(FB x LR) 254 x 430 305 x 508 355 x 558 405 x 660 520 x 750 560 x 787 585 x 863 635 x 1016 737 x 1016 840 x 1118 900 x 1150
Opening in  the Table Dia 76 102 127 190 203 210 222 228 242 260 275
Bolster thickness 60 70 70 76 76 82 89 102 102 115 127
Height of table surface From Floor 720 750 750 775 775 800 850 825 850 850 850
Fly Wheel Dia 405 508 558 660 762 838 914 991 1118 1270 1320
Stroke Per Minute 70 45 40 35 35 45 45 45 35 32 30
Electric Motor (H.P. / RPM) 1/1440 2/1440 3/1440 5/1440 5/1440 7.5/1440 10/1440 10/1440 15/1440 20/1440 25/1440
Air Pressure (Kg./cm2) 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
App. Overall Size 
FB x LR x HT		 850 x 635 x 1450 975 x 735 x 1650 1075 x 825 x 2050 1350 x 1025 x 2550 1450 x 1150 x 2725 1550 x 1225 x 2850 1730 x 1400 x 3250 1905 x 1550 x 3525 2110 x 1760 x 3785 2385 x 2020 x 4125 2450 x 2100 x 4350
Weight(Approx) 900 1600 2200 3000 3500 4000 5500 7000 9000 11000 14000

View Complete Details
Ask Latest Price & Details
Cross Shaft Power Press

Cross Shaft Power Press
  • REDUCED NOISE AND VIBRATIONS.
  • MINIMAL FRAME GAPING, LOW ANGULAR DEFLECTION.
  • HIGH RIGIDITY FRAME AND BOLSTER.
  • HIGH PRECISION FORMING FOR LONGER DIE LIFE.
  • HI-TORQUE PNEUMATICALLY OPERATED SINGLE DISC COMBINED CLUTCH & BRAKE UNIT.
  • GEAR TRANSMISSION RUNS IN OIL BATH.
  • WIDE SLIDE AND BOLSTER AREA.

MODEL JSX-16 JSX-25 JSX-32 JSX-40 JSX-50 JSX-63 JSX-80 JSX-100 JSX-125 JSX-160 JSX-200 JSX-250
Capacity KN  160 250 320 400 500 630 800 1000 1250 1600 2000 2500
Stroke Adjustable  8-63 8-80 8-80 8-88 8-100 8-100 8-110 8-125 8-125 8-160 20-160 20-160
Stroke/Minute (SPM) 75 70 70 65 60 60 55 50 45 40 40 35
Shut Height (SDAU) 210 230 230 250 275 300 340 360 400 425 450 450
Adjustment of Slide 50 63 63 70 70 70 75 80 80 125 125 125
Slide Area(LRXFB) 300x200 350x250 350x250 400x350 450x375 500x400 550x425 600x450 650x520 710x600 900x700 950x800
Punch Hole (Dia X Deep) 40x70 40x70 40x70 50x85 50x85 50x85 55x85 63x85 63x85 63x105 80x110 80x110
Bolster Area (LRXFB) 600x355 630x400 630x400 800x450 850x500 900x550 1000x600 1100x630 1150x680 1220x750 1250x800 1300x850
Bolster Thickness 80 85 85 110 110 120 125 140 140 165 180 180
Height from Floor to Bolster 800 800 800 800 800 900 900 900 900 900 1000 1000
Frame Inside 375 420 440 500 550 600 625 675 700 850 875 925
Main Motor (Geared) HPXP 2x4 3x4 3x4 5x4 5X4 7.5x4 7.5x4 10x4 12.5x4 15x4 20x4 25x4
Slide Adjustment Motor HPXP - - - - - 0.5x4 0.5x4 0.5x4 1x4 1x4 1x4 2x4
Air Pressure (Kg./cm2) 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
Overall Dimension (FBXLRXHT) 1100 x 850 x 2000 1320 x 1010 x 2150 1350 x 1020 x 2200 1450 x 1100 x 2350 1500 x 1150 x 2375 1600 x 1250 x 2650 1660 x 1300 x 2750 1850 x 1400 x 2950 1900 x 1450 x 3050 2150 x 1625 x 3350 2200 x 1650 x 3500 2300 x 1750 x 4100
 

View Complete Details
Ask Latest Price & Details
C Type Super Rigid Pneumatic Power Press Machine

C Type Super Rigid Pneumatic Power Press Machine
Frame :- Frame is of robust fabricated steel construction of rigid & interlocked design. It is strain-free and supports the ram and bed. Pneumatic Clutch & Combined Brake Linked with the flywheel engages every time when the foot switch or both hand is Pressed.
Cranck Shaft :- It is made of special EN8 high tensile steel machined and ground to highest degree of accuracy.
Bearings :- Bush Bearings of high grade Gunmetal machined to almost grade of accuracy with provision of oil grooves to ensure a proper fill of oil lubricant for smooth running of the machine in all conditions.
Knock Out :- Presses above 10 Tons capacity are fitted with knock-out Brackets for stopping down the parts drawn, thus facility the work.
Ram :- Ram is of rigid construction of high tensile cast iron/cast steel with round die shanke hole and clamp.It can be tightend by means of the screws on the side.The slide can be adjust the stroke as desired with out hit and trial method.
Stroke :- Power presses are manufactured with adjustable stroke. Amultiple Claw Sleeve with graduation is provided to get the required adjustment in the Stroke.Operator can adjust the stroke as desired without hit and trial method.
Fly Wheel :- Made of high grade C.I. and designed to generated the maximum energy

CAPACITY 10 20 30 40 50 60 75 100 150 200 250
Crank Shaft dia 63 76 83 95 101 108 121 134 145 160 170
Stroke Adjustment 06-50 13-76 13-89 13-95 13-102 13-102 13-115 13-127 13-152 13-165 13-165
Max. Dist Bolster To Ram (SUAU) 215 255 300 375 400 440 480 505 610 710 750
Slide Adjustment 25 38 38 38 45 45 45 51 51 51 63
Slide face (FB x LR) 101 x 260 140 x 310 165 x 330 170 x 365 210 x 380 210 x 380 235 x 450 280 x 560 315 x 600 340 x 625 360 x 700
Punch Hole(Dia x Deep) 25 x 45 32 x 50 38 x 65 45 x 76 51 x 85 51 x 85 55 x 95 63 x 102 63 x 110 63 x 110 63 x 110
Throat distance 127 152 178 203 260 280 292 318 369 420 450
Size Of Table(FB x LR) 254 x 430 305 x 508 355 x 558 405 x 660 520 x 750 560 x 787 585 x 863 635 x 1016 737 x 1016 840 x 1118 900 x 1150
Opening in  the Table Dia 76 102 127 190 203 210 222 228 242 260 275
Bolster thickness 60 70 70 76 76 82 89 102 102 115 127
Height of table surface From Floor 720 750 750 775 775 800 850 825 850 850 850
Fly Wheel Dia 405 508 558 660 762 838 914 991 1118 1270 1320
Stroke Per Minute 70 45 40 35 35 45 45 45 35 32 30
Electric Motor (H.P. / RPM) 1/1440 2/1440 3/1440 5/1440 5/1440 7.5/1440 10/1440 10/1440 15/1440 20/1440 25/1440
Air Pressure (Kg./cm2) 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
App. Overall Size 
FB x LR x HT		 850 x 635 x 1450 975 x 735 x 1650 1075 x 825 x 2050 1350 x 1025 x 2550 1450 x 1150 x 2725 1550 x 1225 x 2850 1730 x 1400 x 3250 1905 x 1550 x 3525 2110 x 1760 x 3785 2385 x 2020 x 4125 2450 x 2100 x 4350
Weight(Approx) 900 1600 2200 3000 3500 4000 5500 7000 9000 11000 14000
 


View Complete Details
Ask Latest Price & Details
Hydraulic Press Brake Machine Rear Cylinder

Hydraulic Press Brake Machine Rear Cylinder
FRAME : Rigid steel frame of"JSMT"press brakes are optimally designed to avoid weak sections at load support & are of interlocked design. The heavy duty steel construction frame is so designed to absorb heavy shocks of over load .All welding edges are properly machined for weld joints.
HYDR. POWER PACK : Hydraulic system is situteted in bottom at rear side of machine. Hydraulic components are of internationally reputed makers like YUKEN Vickers, Dowty, Rexroth etc. valves are mounted on a compact manifold block minimizing piping and chances of leakages. For oil cooling sufficient size of oil reservoir is provided.
CYLINDERS : Cylinders are precisely honed & are fitted with hard chromed piston rod with best quality sealing elements. Both Cylinders are mounted at back side of machine and are synchronized for parallelism between ram and table, by providing mechanical links connected with cylinder.
RAM TILTING ARRANGEMENT : Tilting arrangement consists of eccentric pin and screw, nut. It adjust parallelism between ram and table.
MECHANICAL BACK GAUGE : Manual back gauge is a standard equipment provided onJSMTpress brakes.
V-BLOCK AND PUNCH : JSMTpress brakes are provided with high quality, standard "V" block & "V" punch.
OPERATION : Electric panel and operational console are provided at right side of the machine for easy operation by the operator. Console and control panel is provided with on-off push button, three phase indicator, pendent and foot switch.
STANDARD ACCESSORIES:
    • Electric motor
    • Manual back gauge
    • Manual lubrication
    • Tilting arrangement system.

  • Control panel with selection of INCH-ONCE-AUTO mode of operation
  • Foot switch fine stroke adjustment rod with limit switches
  • Standard V-block & punch
  • Instruction manual

MODEL TONNAGE BENDING CAP. IN M.S. LENGTH X THICKNESS CLEAR DISTANCE BETWEEN HOUSING RAM STROKE OPEN HEIGHT CLOSED HEIGHT DEPTH OF THROAT MOTOR APP.RAM SPEED MM/SEC OVERALL DIMENSION IN M.M (APP)
H.P APPROACH PRESSING RETURN LENGTH WIDTH HEIGHT
JSHPB 01 30 Ton 2030x2 1500 100 280 180 240 3 40 5 60 2200 1150 1900
JSHPB 02 40 Ton 2030x2.5 1500 100 280 180 240 3 40 5 60 2200 1150 1900
JSHPB 03 40 Ton 2540x2 2000 100 280 180 240 3 40 5 60 2700 1150 1900
JSHPB 04 40 Ton 3125x1.6 2500 100 280 180 240 3 40 5 60 3300 1150 2000
JSHPB 05 50 Ton 2030x3 1500 100 280 180 240 5 40 5 60 2200 1150 1900
JSHPB 06 50 Ton 1525x4 1050 100 280 180 240 5 40 5 60 1700 1150 1900
JSHPB 07 65 Ton 2540x3 2000 150 350 200 240 5 36 5 55 2700 1200 2000
JSHPB 08 65 Ton 2030x4 1500 150 350 200 300 5 36 5 55 2200 1200 2000
JSHPB 09 65 Ton 3125x2.5 2500 150 350 200 300 5 36 5 55 3300 1200 2000
JSHPB 10 80 Ton 2540x4 2000 150 350 200 300 7.5 36 4 55 2700 1550 2300
JSHPB 11 80 Ton 3125x3 2500 150 350 200 300 7.5 36 4 55 3300 1550 2300
JSHPB 12 100 Ton 3125x4 2500 150 350 200 300 10 36 5 55 3300 1550 2300
JSHPB 13 100 Ton 2540x5 2000 150 360 210 300 10 30 5 55 2700 1550 2300
JSHPB 14 120 Ton 2540x6 2000 150 360 210 300 10 30 4 55 2750 1650 2700
JSHPB 15 125 Ton 3125x5 2500 150 360 210 300 10 30 4 55 3300 1650 2500
JSHPB 16 150 Ton 3125x6 2500 150 360 210 300 15 30 4 55 3300 1800 2700
JSHPB 17 160  Ton 2540x8 2000 150 365 215 300 15 30 4 55 2750 1650 2700
JSHPB 18 160 Ton 5000x4 4100 200 415 215 300 15 30 4 55 5300 1850 3000
JSHPB 19 200 Ton 2540x10 2000 200 415 215 350 20 22 5 44 2850 1900 2600
JSHPB 20 200 Ton 3125x8 2500 200 415 215 350 20 22 5 54 3350 2050 2750
JSHPB 21 200 Ton 4200x6 3000 200 415 215 350 20 22 5 54 4600 2100 3100
JSHPB 22 200 Ton 6300x4 5300 200 415 215 350 20 22 5 54 6600 2200 3500
JSHPB 23 250 Ton 2540x13 2000 200 415 215 350 25 20 4 42 2900 2100 2800
JSHPB 24 250 Ton 3125x10 2500 200 415 215 350 25 22 5 44 3400 2100 2800
JSHPB 25 250 Ton 4000x8 3000 200 415 215 350 25 22 5 42 4400 2000 2900
JSHPB 26 250 Ton 5000x6 4100 200 415 215 350 25 20 4 40 5400 2200 3200
JSHPB 27 325 Ton 2540x16 2000 200 500 300 350 30 20 4 40 2900 2200 3000
JSHPB 28 325 Ton 3125x13 2500 200 415 215 350 30 20 4 40 3400 2200 3000
JSHPB 29 325 Ton 4000x10 3000 200 415 215 350 30 20 4 40 4400 2200 3000
JSHPB 30 325 Ton 5000x8 3500 250 500 250 350 30 20 4 40 5400 2200 3200
JSHPB 31 325 Ton 6300x6 5300 250 500 250 350 30 20 4 40 6400 2300 3400
JSHPB 32 400 Ton 2540x20 2000 250 500 250 350 40 25 3 35 2900 2200 3200
JSHPB 33 400 Ton 4000x13 3000 250 500 250 350 40 25 3 35 4400 2200 3000
JSHPB 34 400 Ton 5000x10 4100 250 500 250 350 40 25 3 35 5400 2300 3500
JSHPB 35 400 Ton 6300x8 5300 250 500 250 350 40 25 3 35 6400 2350 3600
 

View Complete Details
Ask Latest Price & Details
H Frame High Speed Precision Pneumatic Power Press

H Frame High Speed Precision Pneumatic Power Press

Our organization has marked a global presence in this domain by manufacturing, exporting and supplying a wide assortment ofPneumatic Power Press. The offered machine is widely applied for punching, cutting, blanking and bending of tough sheets of metals. To manufacture this machine, our diligent workforce uses optimum grade materials and ultra modern technologies in line with set industrial parameters. We can make thePneumatic Power Pressavailable for our valuable clients in different specifications as per their requirements at pocket-friendly prices.

Features :-
  • Power efficient
  • Hassle free performance
  • Noise free operation
  • Minimum maintenance
View Complete Details
Ask Latest Price & Details
H Type Mechanical Pneumatic Power Press

H Type Mechanical Pneumatic Power Press

Owing to our expertise in this domain, we are engaged in manufacturing, exporting and supplying the premium qualityPillar Type Power Press. The offered machine is manufactured by making use of high quality components and ultramodern technology under the guidance of our skilled professionals. Further, the offered machine is available in different specifications and can be customized as per the key requirements of our clients within the promised time frame. Due to its excellent features, thisPillar Type Power Pressis highly demanded in the market.

Features :-
  • Compact design structure
  • Easy to operate and monitor
  • High load capacity
  • Fast working response

CAPACITY TONE 10 20 30 40 50 60 75 100 150 200
Stroke Adjustment m.m 6-50 10-63 10-76 10-89 13-102 13-102 13-115 13-127 13-140 13-152
Adjustment of Ram m.m 25 38 38 38 45 45 45 51 51 51
Crank Shaft dia (At Main Bearing) m.m 63 76 83 89 95 102 115 127 152 160
Max. Distance Between m.m 0 0 0 0 0 0 0 0 0 0
Bed To Ram m.m 215 255 290 320 355 365 375 420 445 470
Punch Hole (dia x deep) m.m 32x45 38x80 38x65 45x76 51x85 51x85 55x95 63x102 63x110 63x110
Size of Bed ( LR x FB) m.m 355x460 457x508 508x559 520x584 559x610 585x660 610x762 660x813 711x914 762x965
Opening in Bed (dia) m.m 82 89 108 108 132 160 203 210 222 236
Thickness of Bolester m.m 55 63 63 76 76 76 89 102 102 115
Opening in Bolester m.m 76 82 102 102 125 152 198 203 215 230
Gear dia m.m 315 506 585 710 812 863 915 1016 1065 1220
Fly Wheel dia m.m 425 508 558 610 660 710 812 914 1016 1065
Stroke per Minute Nos. 70 60 60 55 55 50 50 40 30 30
Electric Motor H.P. 1 2 3 5 5 7.5 10 10 15 20
V-Betls Nos. 2-B 2-B 2-C 2-C 3-C 3-C 3-C 4-C 4-C 5-C
Floor to Toop of Bed m.m 720 750 750 800 800 800 875 863 863 850
Height m.m 1450 1650 2050 2400 2625 2750 3125 3375 3550 3975
Left to Right m.m 610 725 775 950 1050 1085 1225 1425 1650 1975
Front To Back m.m 775 925 1025 1275 1350 1450 1625 1875 2050 2250
Weight Kg. 425 850 1025 1550 2150 2550 3500 5000 6050 7200
 

View Complete Details
Ask Latest Price & Details
C Type Heavy Duty Mechanical Power Press Machine

C Type Heavy Duty Mechanical Power Press Machine

Our organization has gained immense recognition in the industry by providing an excellent quality range ofC Type Power Press. The offered machine is extensively used to bend the metal for giving the specific shape. The provided machine is manufactured by the utilization of fine grade components and modern technologies under the stern supervision of our highly skilled professionals at our cutting-edge manufacturing unit. Furthermore, we provide the offeredC Type Power Pressin various specifications as per the varied requirements of our clients.

Features :-
  • Excellent performance
  • Power efficient
  • Low maintenance
  • Noise free operation
Further Details :- Offered wide range of Jayshakti C-Type Power Press is available in "C" frame versions that have the capacity ranging from 5 ton to 250 tons. Apart from its strong & economical construction, it is known for its several standard as well as optional features that include manual/auto lubrication systems, die-coilers and so on.
Housing Structure :- For making its frame strong and durable, we have used high quality steel plates with ideal cross ribbing. Also, the press which have the capacity up to 30ton is provided with cast iron legs. In order to ensure the alignment of its frame structure, proper machining has been done.
Clutch :- This rolling key type clutch is well supported as well as has rigid construction. designed to provide stroke for mass production in continuous manner.
Crank Shaft :- Made out of steel alloy, crank shaft is fitted with bushes; made up of bronze, for having high precision, accuracy, smooth working operation, and longevity.
Fly Wheel :- This cast iron flywheel is designed in proper radius, which helps in smooth and balanced movement of press machine. Further, it is used for storing and releasing the required energy, which is essential for the proper functioning of offered press.
Gears :- These are made with the help of precision hobbing machine by utilizing high grade steel castor.
Lubrication System :- Known for high efficiency, this system has been provided to lubricate the sliding surfaces and moving parts for their smooth and hassle free movement.
STANDARD ACCESSORIES:
  • Motor pulley
  • Clutch key
  • Clutch key spring
  • Slide adj. spanner
  • Fly wheel & Gear guard
OPTIONAL ACCESSORIES:
  • Tow hand operated clutch
  • Single / continuous stroke
  • Automatic lubrication pump
  • Electric Motor, Starter and Vee-belts.
  • Extra base plate
  • Inclinable Type
  • Knock-out system
  • Oil cups for lubrication point

CAPACITY 5 10 20 30 40 50 60 75 100 150 200 250
Crank Shaft dia 51 63 76 83 95 101 108 121 134 145 160 170
Stroke Adjustment 06-38 06-50 13-76 13-89 13-95 13-102 13-102 13-115 13-127 13-152 13-165 13-165
Max. Dist Bolster To Ram 152 215 255 300 375 400 440 480 505 610 710 750
Slide Adjustment 25 25 38 38 38 45 45 45 51 51 51 63
Slide face (FB x LR) 75 x 85 101 x 260 140 x 310 165 x 330 170 x 365 210x380 210x380 235x450 280x560 315x600 340x625 360 x 700
Punch Hole(Dia x Deep) 25 x 38 25 x 45 32 x 50 38 x 65 45 x 76 51 x 85 51 x 85 55 x 95 63 x 102 63 x 110 63 x 110 63 x 110
Throat distance 102 127 152 178 203 260 280 292 318 369 420 450
Size Of Table(FB x LR) 203x 355 254 x 430 305 x 508 355 x 558 405 x 660 520 x 750 560 x 787 585 x 863 635x1016 737x1016 840 x 1118 900 x 1150
Opening in the Table Dia 63 76 102 127 190 203 210 222 228 242 260 275
Bolster thickness 45 60 70 70 76 76 82 89 102 102 115 127
Height of table surface From Floor 660 720 750 750 775 775 800 850 825 850 850 850
Fly Wheel Dia 355 405 508 558 660 762 838 914 991 1118 1270 1320
Stroke Per Minute 80 70 45 40 35 35 45 45 45 35 32 30
Motor (H.P. / RPM) 1/1440 1/1440 2/1440 3/1440 5/1440 5/1440 7.5/1440 10/1440 10/1440 15/1440 20/1440 25/1440
Size FB x LR x HT 635 x 560 x 1350 850 x 635 x 1450 975 x 735 x 1650 1075 x 825 x 2050 1350 x 1025 x 2550 1450 x 1150 x 2725 1550 x 1225 x 2850 1730 x 1400 x 3250 1905 x 1550 x 3525 2110 x 1760 x 3785 2385 x 2020 x 4125 2450 x 2100 x 4350
Weight(Approx) 305 550 1010 1425 2050 2650 3000 4500 5500 7500 9000 11000

Scroll

View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.