Jawahar Udyog

Ambala Cantt, Ambala, Haryana

The Ball-bearing working spindle is mounted in the electrically welded working head. The working spindle is executed so that collet chucks and normal chucks can be accepted.
To support especially long glass tubes, the machine is equipped with an additional adjustable guide. The operational support is running on ball bushings and can be easily moved by a hand wheel and located in each working position that is requested.
Via a mechanical clamping device, the support is fixed. By pressing the foot-operated die system and rotating the handwheel the other side of the head is moved upwards and herewith the forming tools which are necessary for the forming process are positioned accordingly.
An appropriate burner holder is integrated into the working support.

Dimension and Data:-

Spindle Bore - 110mm
chuck Bore - 110mm
Bed length - 5 foot

Standard Accessories:

Head stock and 3 jaw chuck

Tailstock and 3 jaw chuck

Electric motor half HP AC single phase with pulley

Carbon plate holder

V. Belt

Burner with 2 stop cock

Mouth air blowing attachment

The Ball-bearing working spindle is mounted in the electrically welded working head. The working spindle is executed so that collet chucks and normal chucks can be accepted.

To support especially long glass tubes, the machine is equipped with an additional adjustable guide. The operational support is running on ball bushings and can be easily moved by a hand wheel and located in each working position that is requested.

Via a mechanical clamping device, the support is fixed. By pressing the foot-operated die system and rotating the handwheel the other side of the head is moved upwards and herewith the forming tools which are necessary for the forming process are positioned accordingly.

An appropriate burner holder is integrated into the working support.

Dimension and Data:-

Spindle Bore - 80mm

chuck Bore - 85mm

Bed length - 5 foot

Standard Accessories:

Headstock and 3 jaw chuck

Electric motor half HP AC single phase with pulley

Carbon plate holder

V. Belt

Burner with 2 stop cock

Mouth air blowing attachment

The Ball-bearing working spindle is mounted in the electrically welded working head. The working spindle is executed so that collet chucks and normal chucks can be accepted.

To support especially long glass tubes, the machine is equipped with an additional adjustable guide. The operational support is running on ball bushings and can be easily moved by a hand wheel and located in each working position that is requested.

Via a mechanical clamping device, the support is fixed. By pressing the foot-operated die system and rotating the handwheel the other side of the head is moved upwards and herewith the forming tools which are necessary for the forming process are positioned accordingly.

An appropriate burner holder is integrated into the working support.

Dimension and Data:-

Spindle Bore - 60mm

chuck Bore - 65mm

Bed length - 5 foot

Standard Accessories:

Head stock and 3 jaw chuck

Tailstock and 3 jaw chuck

Electric motor half HP AC single phase with pulley

Carbon plate holder

V. Belt

Burner with 2 stop cock

Mouth air blowing attachment

The Ball-bearing working spindle is mounted in the electrically welded working head. The working spindle is executed so that collet chucks and normal chucks can be accepted.

To support especially long glass tubes, the machine is equipped with an additional adjustable guide. The operational support is running on ball bushings and can be easily moved by a hand wheel and located in each working position that is requested.

Via a mechanical clamping device, the support is fixed. By pressing the foot-operated die system and rotating the handwheel the other side of the head is moved upwards and herewith the forming tools which are necessary for the forming process are positioned accordingly.

An appropriate burner holder is integrated into the working support.

Dimension and Data:-

Spindle Bore - 110mm

chuck Bore - 110mm

Bed length - 5 foot

Standard Accessories:

Headstock and 3 jaw chuck

Electric motor half HP AC single phase with pulley

Carbon plate holder

V. Belt

Burner with 2 stop cock

Mouth air blowing attachment

The Ball-bearing working spindle is mounted in the electrically welded working head. The working spindle is executed so that collet chucks and normal chucks can be accepted.

To support especially long glass tubes, the machine is equipped with an additional adjustable guide. The operational support is running on ball bushings and can be easily moved by a hand wheel and located in each working position that is requested.

Via a mechanical clamping device, the support is fixed. By pressing the foot-operated die system and rotating the handwheel the other side of the head is moved upwards and herewith the forming tools which are necessary for the forming process are positioned accordingly.

An appropriate burner holder is integrated into the working support.

Dimension and Data:-

Spindle Bore - 85mm

chuck Bore - 85mm

Bed length - 5 foot

Standard Accessories:

Headstock and 3 jaw chuck

Tailstock and 3 jaw chuck

Electric motor half HP AC single phase with pulley

Carbon plate holder

V. Belt

Burner with 2 stop cock

Mouth air blowing attachment

Being the leading names in the industry, we are offering an extensive range ofThread Cutting Machinethat is designed by making use of quality proven components and modern technology. Highly appreciated among our clients for its corrosion resistance body structure, robustness and energy efficient features, our quality inspectors check this cutting machine on varied parameters in order to remove any possible defect from.

The Ball-bearing working spindle is mounted in the electrically welded working head. The working spindle is executed in a way that a collet chucks, as well as normal chucks, can be accepted.
The machine is equipped with an additional adjustable guide to support exceptionally long glass tubes. The working support is running on ball bushings and can be easily moved by a hand wheel and located into each working posi on which is requested.
Via a mechanical clamping device, the support is fixed. By pressing the foot-operated die system and rotating the handwheel the other side of the head is moved upwards and herewith the forming tools which are necessary for the forming process are positioned accordingly.
An appropriate burner holder is integrated into the operational support.

Dimension and Data:-

Spindle Bore - 85mm
chuck Bore - 85mm
Bed length - 3.5 foot

Standard Accessories:

Headstock and 3 jaw chuck

Electric motor half HP AC single phase with pulley

Carbon plate holder

V. Belt

Burner with 2 stop cock

Mouth air blowing attachment