JANANI ENTERPRISES

Coimbatore, Tamil Nadu

Salient Features :

• Volute & Impellers are injection molded PVDF material with smooth hydraulic passage.
• Shaft are available with sleeves of different materials compatible with the liquid handfed
• Pumps are available with externally mounted balanced mech seal or teflon gland packing or Internal mech seal with elastomer bellows.
• Less space required & easy to handle
• Excellent mechanical properties over a wide range of temperature (23C to 130 C) . Abrasion resistance comparable to that of Polyamide, and relatively low coefficient of friction.
• Smooth running and long service life of the mechanical seal.
• Epoxy paint to protect from external protection of pump.
• External cooling arrangement provided in pump for enhancement of mechanical seal life.
• Liquid Handled.
• Polypropylene can handle more than 560 types of chemicals Like Ammonium Chloride I Pickling, Con. HCL Acid, Calcium Sulphate, Caustic Soda, Cynic Acid, Ferric Nitrate, Phosphoric Acid and many more.
• Liquid Handled.
• Polypropylene can handle more than 560 types of chemicals Like Ammonium Chloride I Pickling, Con. HCL Acid, Calcium Sulphate, Caustic Soda, Cynic Acid, Ferric Nitrate, Phosphoric Acid and many more.

We have established ourselves as coveted organization, involved in manufacturing, supplying and exporting a wide gamut of Cooling Tower Spare Parts. These parts are developed and designed using high grade raw material mainly stainless steel in compliance with industry laid norms and guidelines. Owing to excellent features such as high tensile strength, high durability and low maintenance, our entire range is widely demanded by our valuable clients. Further, clients can avail these parts from us in a wide range such as Drift Eliminator, Drive Shaft, FRP Fan, Cooling Tower Gear Box, Aluminum Alloy Rotating Sprinkler, FRP Casing Panels, PVC Fills and Stainless Steel Wire Mesh.

Providing you the best range of pvc fills, double edge fold pvc fills, cooling tower fills and pvc cooling tower fills with effective & timely delivery.

Fin Type Cooler are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements, We are the professional Fin Type Coolerand air cooled condenser manufacturers, tubes in copper and fins are aluminium MOC we use 5/8" or 3/8"and 1" OD copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.

Function of Fin Fan Coolers :

• Air Cooled Heat Exchangers - also known as Fin Fan Coolers, are heat transfer devices for rejecting heat from a hot process fluids such as refinery products or steam directly, to the surrounding atmosphere.
• Janani Enterprises Fin Fan Coolers are basically that multiple rows of fin tubes with a fan to move lower temperature ambient air over the coils in order to cool the hotter fluid, just like a radiator in industrial an automobile. An industrial example is a unit large enough to reject the heat from a turbine exhaust steam condensation system

Advantages of Fin Type Cooler :

• A great deal of water gets preserved on using Fin Type Cooler.
• Less or no preparation needed as atmospheric air is in abundance.
• No formation of scale or heat exchanger cleaning is required.
• There are no mobile parts except for the fan and the motors. Hence the Cooling Tower maintenance is negligible.
• Dust, fly ash, living organisms or dirt do not get mixed up with process water.
• There are no constraints placed on the location of plant.
• No corrosions caused by air.
• This Cooling Tower performance ensures minimal environmental impact.
• Reduced annual operating expenses.

Need a spare part for your chiller?Being a specialist chiller service company, we can supply only, or supply and fit a wide range of chiller spares for the majority of UK and European chiller brands at competitive prices; York, Trane, Carrier, Lennox, McQuay, Airedale, Hitachi, Climaveneta, MTA Blue Box and Rhoss to name but a few.Spare parts for chillers can range from small electrical and refrigeration components, through to condensers, evaporators and compressors. Where a replacement compressor is required, screw, scroll or semi - hermetic we can offer new or remanufactured ones, both guaranteed.

Advantages of Fin Type CoolerFor complete peace of mind, why not purchase the spare part and have it installed by the UK's most experienced and qualified specialist chiller service company, Coolmation Service Ltd, now better known as service4chillers.

We are engaged in undertaking turnkey projects of centralized AC plant, ventilation, refrigeration and humidification plant. These are widely used in textile industries to manufacture yarns of various garments. Our experts also offer consultancy for these projects, which are advanced in performance and durable and reliable. We are also a leading exporter of humidifiers so that the level of humidity can be increased. Our skilled professionals in keeping the requisite demands of the industries create the designs.

Features :

• Easy to install
• Longer functional life
• Corrosion resistant
• Application specific design
• Precision functionality
• Optimum performance oriented

Janani equipments evaporator cooling system division manufacturing includes of Evaporative cooling performance which installed outside of wall, brings fresh air into room by air distribution pipe with lowest power consumption, allows door and windows open, make your workshops and offices, factories cool in hot weather to be possible by paying 80% less power consumption to get best productivity and highest working efficiency.
This dynamic due to changes in external temperature and humidity level. Under typical operating conditions, an evaporative cooler will nearly always deliver air cooler than 27C (80F). A typical residential 'swamp cooler' in good working order should cool air to within 34C (57F) of the wet-bulb temperature.
Janani cooling machines ensure even & continuous water distribution which in turn gives higher cooling efficiency .Water distributor used will not allow circulating water to leak/to fall fan motor or to deviate its flow. Even water distribution will ensure higher cooling.

RADIATORSJanani equipment's Radiators are actually heat exchangers that are utilized to transfer thermal energy from a medium to the other for heating and cooling purposes. Most of the radiators are designed to function in buildings, electronics and automobiles. It is a heat source to the environment, though it may be to heat the surrounding or cool the coolant or fluid that is given to it, as in engine cooling. Janani equipment's wide variety and range of radiators, constructed from copper are manufactured with the latest in technology and technical data. A radiator makes use of hot water that circulates via metal pipes to heat air. As it passes through the pipe, the pipe itself gets heated and this heat is transmitted to the air, thus the room becomes warm. The hot water flows back to a boiler, in which it is heated & then circulated back.

Radiator Function in Engine CoolingA liquid coolant is passed via the engine block, where it gets heated, and then is passed via the radiator where the heat is lost to the atmosphere. Though the coolant is usually water based, it can also be oil. The coolant air can be pumped or fanned through the radiator. The hot water radiator is copper pipe that is iteratively bent perpendicularly to create a heating surface of maximum area. The pipes follow the ridged lines. Through valves present at the bottom, water enters and exits. The pipes of copper are bent backward and forward ten to twenty times covering a maximum surface in order to give more heat. Large radiators have many such bents as they have a huge surface area that heats the full room in the building. The hot water that is pumped inside the radiators from the main heating boiler passes through the copper pipes, heats the outer surface and ultimately warms the room. A screw valve located at the bottom of each radiator helps in temperature control. These radiators are of two kinds namely single pipe & double pipe. The radiators of single pipe operate with steam whereas the radiators of double pipe operate with hot water or steam. The double pipe kind is the vintage radiator type that has the highest demand.

Scan air manufactured online, recirculated water chillers for various applications as detailed given below. Water chillers for applications ranging from 1° C - 25° C ° ± 1° C specially for soft drink industry online chiller with Stainless Steel 316 grade secondary heat exchanger. The chillers are designed new generation styled and built esthetically to match the modern trend in equipment manufacturing. Standard flow is a portable water chiller with the tank. They are used in closed loop cooling applications. Where all of the water pumped from the chiller returns to the machines under generated by the chiller pump.

• Reversed flow is a portable water chiller without the tank. It is used in open loop cooling applications where an external tank or through is used. This tank are through must gravity feed into the chiller pump. Which sense water through the chiller and filter, back to the process or back to the tank or through.

Water cooled chillers are typically indoor installation and operation, they are cooled by a separate condenser water loop and connected to outdoor Cooling Towers to expel heat to the atmosphere.

Quality ControlOur chillers are compact design covering minimum floor area. low cost maintenance, break through technology and long life serviceability Chilled water temperature can range from 5 Deg C to 7Deg C We are manufacturing chillers ranging from 0.5 TR to 250 TR

Specifications :When determining industrial chiller specifications, the following aspects need to be taken into consideration

• Source of power
• Chiller rating
• Capacity of the evaporator and condenser
• Cooling capacity of the chiller
• Type of the evaporator
• Ambient temperature
• Material of evaporator and condenser

Water Cooled Chiller Application

• Chilled water or other liquid from the chiller is pumped through process or laboratory equipment. Industrial chillers are used for cooling of products, mechanisms and factory machinery in systems a wide range of industries like.
• Plastic industry in injection and blow moulding.
• Metal working cutting oils, welding equipment.
• Die-Casting and machine tooling, chemical processing
• Pharmaceutical formulation
• Paper and cement processing
• Vacuum systems
• X-ray diffraction