Chilled water is used to cool and dehumidify air in mid to large size commercial, industrial facilities like Water chillers can be either water cooled chiller or air cooled chiller Whenever a chiller's heat rejection can be used for a productive purpose, in addition to the cooling function.

Water Cooled Chillers :

Water cooled chillers are typically indoor installation and operation, it's all cooled by a separate condenser water loop and connected to outdoor Cooling Towers to expel heat to the atmosphere.

Air Cooled Chiller:

Air Cooled chillers are intended for outdoor installation and operation. Air cooled machines are directly cooled by ambient air being mechanically circulated directly through the machine's condenser coil to expel heat to the atmosphere.

Quality Control:

Our chillers are compact design covering minimum floor area. low cost maintenance, break through technology and long life serviceability Chilled water temperature can range from 5C to 7C Our Chillers manufacturing range from 0.5 TR to 250 TR

Function Of Industrial Chiller

The industrial chillers are normally packaged, complete and closed-loop systems Include the condenser, pumps, chiller, temperature control systems and associated valves.

Circulates water or any other coolant at constant pressure and temperature. The coolant flows from the chiller to the point of application and back again.

Refrigeration is used as the cooling process in most of the industrial chillers. Some depend on air or water that flows over the coils containing a specific coolant in order to regulate the temperature.

The coolant that is used most commonly in process chillers is water, though coolant mixtures are employed frequently. The latest development in industrial water chillers is the utilization of water cooling rather than air cooling.

The condenser cools the refrigerant with water and not air. A Cooling Tower cools the air, thus reducing the need for energy as well as the chiller size. This is because of the condenser's small surface area and the lack of cooling fans which minimizes the noise levels too.

Industry Chiller Application

• Plastic industry in injection and blow moulding,
• Metal working cutting oils, welding equipment,
• Die-casting and machine tooling, chemical processing,
• Pharmaceutical formulation,
• Food and beverage processing

Specifications

• Source of power
• Chiller rating
• Capacity of the evaporator and condenser
• Cooling capacity of the chiller
• Type of the evaporator
• Ambient temperature

Pumps are available in different mounting constructions like horizontal bare pumps, monoblock pump. Pump shaft & sleeves are available with different materials compatible with the liquid handled.

Water cooled chillers are typically indoor installation and operation, they are cooled by a separate condenser water loop and connected to outdoor Cooling Towers to expel heat to the atmosphere.

Quality Control

Our chillers are compact design covering minimum floor area. low cost maintenance, break through technology and long life serviceability Chilled water temperature can range from 5C to 7C We are manufacturing chillers ranging from 0.5 TR to 250 TR

Specifications

When determining industrial chiller specifications, the following aspects need to be taken into consideration

• Source of power
• Chiller rating
• Capacity of the evaporator and condenser
• Cooling capacity of the chiller
• Type of the evaporator
• Ambient temperature
• Material of evaporator and condenser

Water Cooled Chiller Application

Chilled water or other liquid from the chiller is pumped through process or laboratory equipment. Industrial chillers are used for cooling of products, mechanisms and factory machinery insystems a wide range of industries like.

• Plastic industry in injection and blow moulding.
• Metal working cutting oils, welding equipment.
• Die-Casting and machine tooling, chemical processing
• Pharmaceutical formulation
• Paper and cement processing
• Vacuum systems
• X-ray diffraction

Fin Type Cooler are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements, We are the professional Fin Type Coolerand air cooled condenser manufacturers, tubes in copper and fins are aluminium MOC we use 5/8" or 3/8"and 1" OD copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.

Function of Fin Fan Coolers

Air Cooled Heat Exchangers - also known as Fin Fan Coolers, are heat transfer devices for rejecting heat from a hot process fluids such as refinery products or steam directly, to the surrounding atmosphere.

Janani Enterprises Fin Fan Coolers are basically that multiple rows of fin tubes with a fan to move lower temperature ambient air over the coils in order to cool the hotter fluid, just like a radiator in industrial an automobile. An industrial example is a unit large enough to reject the heat from a turbine exhaust steam condensation system

Advantages of Fin Type Cooler

• A great deal of water gets preserved on using Fin Type Cooler.
• Less or no preparation needed as atmospheric air is in abundance
• No formation of scale or heat exchanger cleaning is required
• There are no mobile parts except for the fan and the motors. Hence the Cooling Tower maintenance is negligible
• Dust, fly ash, living organisms or dirt do not get mixed up with process water
• There are no constraints placed on the location of plant
• No corrosions caused by air
• This Cooling Tower performance ensures minimal environmental impact
• Reduced annual operating expenses

Chilled water is used to cool and dehumidify air in mid to large size commercial, industrial facilities like Water chillers can be either water cooled chiller or air cooled chiller Whenever a chiller's heat rejection can be used for a productive purpose, in addition to the cooling function.

Water Cooled Chillers :

Water cooled chillers are typically indoor installation and operation, it's all cooled by a separate condenser water loop and connected to outdoor Cooling Towers to expel heat to the atmosphere.

Air Cooled Chiller:

Air Cooled chillers are intended for outdoor installation and operation. Air cooled machines are directly cooled by ambient air being mechanically circulated directly through the machine's condenser coil to expel heat to the atmosphere.

Quality Control:

Our chillers are compact design covering minimum floor area. low cost maintenance, break through technology and long life serviceability Chilled water temperature can range from 5C to 7C Our Chillers manufacturing range from 0.5 TR to 250 TR

Function Of Industrial Chiller

The industrial chillers are normally packaged, complete and closed-loop systems Include the condenser, pumps, chiller, temperature control systems and associated valves.

Circulates water or any other coolant at constant pressure and temperature. The coolant flows from the chiller to the point of application and back again.

Refrigeration is used as the cooling process in most of the industrial chillers. Some depend on air or water that flows over the coils containing a specific coolant in order to regulate the temperature.

The coolant that is used most commonly in process chillers is water, though coolant mixtures are employed frequently. The latest development in industrial water chillers is the utilization of water cooling rather than air cooling.

The condenser cools the refrigerant with water and not air. A Cooling Tower cools the air, thus reducing the need for energy as well as the chiller size. This is because of the condenser's small surface area and the lack of cooling fans which minimizes the noise levels too.

Industry Chiller Application

• Plastic industry in injection and blow moulding,
• Metal working cutting oils, welding equipment,
• Die-casting and machine tooling, chemical processing,
• Pharmaceutical formulation,
• Food and beverage processing

Specifications

• Source of power
• Chiller rating
• Capacity of the evaporator and condenser
• Cooling capacity of the chiller
• Type of the evaporator
• Ambient temperature

Pumps are available in different mounting constructions like horizontal bare pumps, monoblock pump. Pump shaft & sleeves are available with different materials compatible with the liquid handled.

Water cooled chillers are typically indoor installation and operation, they are cooled by a separate condenser water loop and connected to outdoor Cooling Towers to expel heat to the atmosphere.

Quality Control

Our chillers are compact design covering minimum floor area. low cost maintenance, break through technology and long life serviceability Chilled water temperature can range from 5C to 7C We are manufacturing chillers ranging from 0.5 TR to 250 TR

Specifications

When determining industrial chiller specifications, the following aspects need to be taken into consideration

• Source of power
• Chiller rating
• Capacity of the evaporator and condenser
• Cooling capacity of the chiller
• Type of the evaporator
• Ambient temperature
• Material of evaporator and condenser

Water Cooled Chiller Application

Chilled water or other liquid from the chiller is pumped through process or laboratory equipment. Industrial chillers are used for cooling of products, mechanisms and factory machinery insystems a wide range of industries like.

• Plastic industry in injection and blow moulding.
• Metal working cutting oils, welding equipment.
• Die-Casting and machine tooling, chemical processing
• Pharmaceutical formulation
• Paper and cement processing
• Vacuum systems
• X-ray diffraction

Fin Type Cooler are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements, We are the professional Fin Type Coolerand air cooled condenser manufacturers, tubes in copper and fins are aluminium MOC we use 5/8" or 3/8"and 1" OD copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.

Function of Fin Fan Coolers

Air Cooled Heat Exchangers - also known as Fin Fan Coolers, are heat transfer devices for rejecting heat from a hot process fluids such as refinery products or steam directly, to the surrounding atmosphere.

Janani Enterprises Fin Fan Coolers are basically that multiple rows of fin tubes with a fan to move lower temperature ambient air over the coils in order to cool the hotter fluid, just like a radiator in industrial an automobile. An industrial example is a unit large enough to reject the heat from a turbine exhaust steam condensation system

Advantages of Fin Type Cooler

• A great deal of water gets preserved on using Fin Type Cooler.
• Less or no preparation needed as atmospheric air is in abundance
• No formation of scale or heat exchanger cleaning is required
• There are no mobile parts except for the fan and the motors. Hence the Cooling Tower maintenance is negligible
• Dust, fly ash, living organisms or dirt do not get mixed up with process water
• There are no constraints placed on the location of plant
• No corrosions caused by air
• This Cooling Tower performance ensures minimal environmental impact
• Reduced annual operating expenses