Our Products
Tube Fittings
1 Products availableButt Weld Pipe Fittings
1 Products availableForged Pipe Fittings
1 Products availableWires
1 Products availableSteel Coils
1 Products availableFlanges
1 Products availableSteel & Steel Products
1 Products availableFasteners
1 Products availableWelded Pipes
1 Products availableLeading Manufacturer, Supplier & Retailer of Hot Rolled Steel Angle Bar.
Jain Steels Corporation suppliers and manufacturers a wide range ofStainless steel Flats. These are of comprehensive use to the creators of automobile and auto-ancillaries, gratings, wire containers, base plats, earthing material, ship building, units, flanges, clamps truck trailer, tippers, railways, bus body, lifts and escalators, scaffold manufacturers, and several other programs across different industries. They are also being utilized in the structural and other structural areas.
There are a different range ofstainless steel fastenerlike stainless steel screws, bolts and nuts products offering different levels of resistance and strength. They are used for harsh industry and sea water surroundings, equipment, structural and structural applications. These products can be used for all stainless steel designs and for becoming a member of other materials such as copper, aluminium, carbon steel, and zinc.
The requirements of a specific fastener grade should be based on the required deterioration level of resistance, durability and materials that will be fastened. The fastener should have equivalent or higher deterioration level of resistance than the most deterioration resistant of the metal(s) being fastened.
Types of Bolts and Nuts
Stainless steel pipe fittingsandpipe fittingsto link and install the standard, the introduction of further control the market for stainless steel pipe fittings, from departments concerned that: stainless steel pipe fittings compression-type pipe fittings and stainless steel pipe fittings to link with the thin-walled stainless steel tube will have a new country standard to link the two products and construction requirements will also have national standards.
* Stainless Steel Pipe Fittings hose barbs hose Nipples
* Stainless Steel Pipe Fittings Hose barb connectors fittings Accessories
* Stainless Steel nuts fittings Unions
* SS Screws Stainless Steel Ferrules Sockets Nuts
* Stainless Steel Bushes Stainless Steel SS S.S. Twin Ferule compression fittings
* Stainless Steel connectors Plugs etc.
Stainless steel wireshave become the base of many sectors such as construction, home rehabilitation, electronic devices, cell phones, automobiles and almost everywhere. The primary reason behind growing use of this metal is its features that make it deterioration level of resistance, low maintenance, and development cost. Thesestainless steel wiressecure high structure and provide a safe and stylish rail.
Nowadays, there are hardly any development or production venture which can be finished without the use ofstainless-steel-chequered-plate stainless steel plates. The purpose is quite simple, stainless steel plates have high tensile strength, better durability and provides a great complete. The best part about using them is low servicing which has placed it as an excellent substitute to conventional metal.
Though the preliminary price on the stainless steel tube is great, but they are efficient and affordable in the lengthy run. There are different kinds of tubes available each having use in a particular place. This publish provides details about the different kinds of stainless steel tubes and their programs.
Stainless steel is a metal amalgam with 10.5 to 11 % chromium content. Based on if chromium is included to flat carbon steel, stainless steel shows dirt protection. Other than iron, carbon, and chromium, cutting edgestainless steel rodscan include elements like nickle, niobium, molybdenum, and titanium. Nickel, molybdenum, niobium, and chromium are included to flourish the break down protection ofstainless steel rods. At least 12% chromium ought to be included to the metal to make it resistant to corrosion.
Stainless steel barsare a very essential part of industrial, manufacturer, and residential developing projects. It is essential have an idea in mind with respect to the design you are planning to use thestainless steel metal barfor. These days, there are many different kinds of uses for these components such as developing racks for the kitchen, catering equipments, furniture, etc. Stainless steel is made by combining metal with non-corrosive metal to give it additional qualities that will make it more long lasting.
Jain Steels Corporation sell All Grades ofStainless Steel bars in Delhias well as India. We are leadingStainless Steel bars supplier, manufacturer and exporters.
Stainless Steel Tube Fittingsare used in various sectors like pharmaceutical, gas fitting, refrigeration etc. and are one of the most important commercial fittings. There are many tube fittings such as large head reducer, tube cap, tube elbow and male shoulder among many other types. These are created to fulfil the particular requirements of various sectors under strict QC actions.Stainless Steel Tube Fittingsare created in carbon steel, alloy steel and stainless steel moreover to a wide range of components like Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Lead, Zinc, Titanium and Tantalum- to list a few.
Stainless Steel Sheetis a metal formed by processing raw material into flat and thin pieces. It is a fundamental form that is used in metal processing because it can be cut and bent into various shapes. Numerous every day objects can be made with stainless steel sheets. They even form basis of formation of other steel based products like stainless steel pipes and stainless steel tubes.
Jain Steels Corporation suppliesstainless steel sheetaccording to ASTM A240/480. The sheet can besupplied with surface finishes ranging from no. 1, 2B, no. 4 and BA. Based on requirement, it can be cut to length or sold in full size. We can supply various types of stainless steel sheets:
Jain Steels Corporation manufacturer and exporters of stainless steel coils in Delhi as well as all over India because Steel is one of the most used materials today and we are expert in this industries. It is a versatile and durable metal widely used in metalworking, development and engineering innovation. A stainless steel coil is established when the metal is cut into thin, flat sheets or combined into coiled pieces. Perspective balance is an important property of stainless steel coils used in infrastructures. This will help structures and components hold up against severe ecological conditions for a long period. The evaluate or width of a stainless steel coil relies on its application and type of metal used.
Forgedfittingshave special quality finishing and duress for long life, high pressure and zero defects.Forged Fittings&Socket weld fittings of high quality are supplied by Jain Steel Corporation.Forged Fittingsare offered in various shapes such as , tees , elbows, cross , nipples etc. Precision finishing threading is available in NPT, BSPT & BSPP as per the international standards.
ForgedFittings are subject to high pressure for critical applications and can be manufactured in various grades of Stainless Steel & Alloy Steel. Stainless Steel grades include 304 , 316 , 304L , 316L, 317 etc. Alloy Steel include Monel , Inconel , Hastelloy , Duplex Steel , Super Duplex Steel , 254 SMO. Forgedfittings can also be made in Carbon Steel and Special Grade Steel.
Flanges are used on rails to make sure that the wheels are kept in well movement and the rails are not quickly used out.Stainless SteelFlangesare normally used to get in touch two pipe joints together through the screws or the welding technique.
Flangesare created from many components, of which metal is the most used material.Stainless Steel flangesare mostly used in plumbing techniques and in other programs because of their low servicing and greater support lifestyle.
Flanges help to keep the pipe joints remain powerful without the threats of leaking. The flanges are available in various forms and the most typical ones being rectangle shaped, square and round. There are different flange requirements globally and to make sure simple inter-changeability, these are developed in consistent dimensions.
Butt weld fittingshave special quality finishing and duress for long life, high pressure and zero defects.Butt weld fittingsare offered in various shapes such as tees, elbows, reducers, stub-ends, caps, collars, inserts etc.
Butt weld fittingsof high quality are manufactured by JainSteels Corporation. Butt weld Fittings are subject to high pressure for critical applications and can be manufactured in various grades of Stainless Steel & Alloy Steel. Stainless Steel grades include 304 , 316 , 304L , 316L, 317 etc. Alloy Steel include Monel , Inconel , Hastelloy , Duplex Steel , Super Duplex Steel , 254 SMO. Butt weld fittings can also be made in Carbon Steel and Special Grade Steel.