• Seamless drip tape with drippers permanently fixed inside. Seamless construction improves ability to withstand pressure fluctuations.
• Marked with two parallel yellow stripes Twin- Linesymbol of quality. It also helps to ensure upright positioning of the dripper.
• Manufactured from special grade, virgin polymer ensuring close dimensional tolerance and higher strength even at lower wall thickness.
• Manufactured with the most modern, state-of-the-art equipment. Its computerized continuous online quality control ensures reliable quality and consistent performance.
• Hydraulically designed turbulent flow path of emitter with wide cross sectional area and precision inlet filter that makes it truly clog resistant drip tape.
• Precision laser drilled outlet holes.
• Extremely low manufacturing coefficient of variation, CVm ensures high field emission uniformity.
• Available in 12, 16, 17, 22 and 25 mm nominal diameter as per metric standard. 5/8", 7/8", 9/8" and 1-3/8" nominal diameter as per US standard.
• Available in four discharge rates of 0.65, 1.0, 1.4, 1.8 and 3.4 lph at nominal operating pressure of 0.7 kg/cm as per metric standard. 0.19, 0.27, 0.36, 1.47 and 0.89 gph at nominal operating pressure of 10 psi as per US standard.
• Available in wall thickness ranging from 6mil to 25mil (0.15mm to 0.63mm).
• Available in standard dripper spacing of 20, 30, 40, 50, 60, 75, 90 and 100 cm. Any other spacing and group spacings are available on demand.
• Specially designed Tape Lockfittings are available. Please refer to Poly Fittings & Accessories page.
• Minimum 100 micron filtration recommended. However required filtration type and precision depends upon quality of source water.
• Recommended for closely spaced seasonal row crops like sugarcane, cotton, chilly, potato, ground nut, onion, vegetables, oil seeds, banana, strawberry, floriculture, etc.
• Suitable for surface and subsurface applications

• Seamless drip tape with integrated emitter strip welded inside. Seamless construction improves ability to withstand pressure fluctuations.
• Manufactured from special grade virgin polymer ensuring close dimensional tolerance even at lower wall thickness.
• Manufactured with the most modern, state-of-the-art equipment. Its computerized continuous online quality control ensures reliable quality and consistent performance.
• Precisely formed flow path resulting in an extremely low manufacturing coefficient of variation, (CVm) ensures high field emission uniformity.
• Truly clog resistant design due to:
  • Multiple, fine inlet filters that prevents the entrance of soil, silt particles and algae of size larger than flow path cross section.
  • Dual entry filter segments allows water entry from two side maintains unobstructed water flow.
  • Flexible bottom wall, expands and pushes any particulate matter that tend to block the flowpath. It also helps to break the deposited salt scaling and pushes it out of the emitter.
  • Innovative, laser drilled slit outlet closes when system is pressureless. This inhibits the root intrusion and prevents soil suction.
  • Large cross sectional area and hydrodynamically designed turbulent flow path prevents squirting and makes the emitter clog resistant.
• Smooth inner surface allows longer lengths.
• Available in 12, 16, 17, 19 and 25 mm nominal diameter as per metric standard. 5/8", 7/8", 9/8" and 1-3/8" nominal diameter as per US standard.
• Available in wall thickness ranging from 6 to 25 mil (0.15 to 0.63 mm).
• Flexibility in selection of discharges and outlet spacing.
• Uniform water spread gives high distribution uniformity and improves water application efficiency.
• Specially designed Tape Lockfittings are available.
• Minimum 100 micron filtration recommended. However required filtration type and precision depends upon quality of source water.
• Recommended for closely spaced seasonal row crops like sugarcane, cotton, chilly, potato, ground nut, onion, vegetables, oil seeds, banana, strawberry, floriculture etc.
• Recommended for irrigation in green house/ shade house.
• Suitable for subsurface and surface applications.

Drip tape is a thin walled drip line used in drip irrigation. Drip tape is made of Special grade polyethylene material. It is also called as collapsible hose, once pressurized it becomes round and collapses on depressurizing. Being a flat tube it can be supplied on reels containing several thousand feet. The nominal diameter ranges from 12 to 25 mm. It can be used for surface and subsurface applications. Thin walled tapes are suitable for 2-3 seasons but can be used for longer period if used subsurface. Drip tape helps in reduction of initial investment of drip irrigation.

• Seamless drip tape with drippers permanently fixed inside. Seamless construction improves ability to withstand pressure fluctuations.
• Marked with two parallel yellow stripes Twin- Linesymbol of quality. It also helps to ensure upright positioning of the dripper.
• Manufactured from special grade, virgin polymer ensuring close dimensional tolerance and higher strength even at lower wall thickness.
• Manufactured with the most modern, state-of-the-art equipment. Its computerized continuous online quality control ensures reliable quality and consistent performance.
• Hydraulically designed turbulent flow path of emitter with wide cross sectional area and precision inlet filter that makes it truly clog resistant drip tape.
• Precision laser drilled outlet holes.
• Extremely low manufacturing coefficient of variation, CVm ensures high field emission uniformity.
• Available in 12, 16, 17, 22 and 25 mm nominal diameter as per metric standard. 5/8", 7/8", 9/8" and 1-3/8" nominal diameter as per US standard.
• Available in four discharge rates of 0.65, 1.0, 1.4, 1.8 and 3.4 lph at nominal operating pressure of 0.7 kg/cm as per metric standard. 0.19, 0.27, 0.36, 1.47 and 0.89 gph at nominal operating pressure of 10 psi as per US standard.
• Available in wall thickness ranging from 6mil to 25mil (0.15mm to 0.63mm).
• Available in standard dripper spacing of 20, 30, 40, 50, 60, 75, 90 and 100 cm. Any other spacing and group spacings are available on demand.
• Specially designed Tape Lockfittings are available. Please refer to Poly Fittings & Accessories page.
• Minimum 100 micron filtration recommended. However required filtration type and precision depends upon quality of source water.
• Recommended for closely spaced seasonal row crops like sugarcane, cotton, chilly, potato, ground nut, onion, vegetables, oil seeds, banana, strawberry, floriculture, etc.
• Suitable for surface and subsurface applications

• Seamless drip tape with integrated emitter strip welded inside. Seamless construction improves ability to withstand pressure fluctuations.
• Manufactured from special grade virgin polymer ensuring close dimensional tolerance even at lower wall thickness.
• Manufactured with the most modern, state-of-the-art equipment. Its computerized continuous online quality control ensures reliable quality and consistent performance.
• Precisely formed flow path resulting in an extremely low manufacturing coefficient of variation, (CVm) ensures high field emission uniformity.
• Truly clog resistant design due to:
  • Multiple, fine inlet filters that prevents the entrance of soil, silt particles and algae of size larger than flow path cross section.
  • Dual entry filter segments allows water entry from two side maintains unobstructed water flow.
  • Flexible bottom wall, expands and pushes any particulate matter that tend to block the flowpath. It also helps to break the deposited salt scaling and pushes it out of the emitter.
  • Innovative, laser drilled slit outlet closes when system is pressureless. This inhibits the root intrusion and prevents soil suction.
  • Large cross sectional area and hydrodynamically designed turbulent flow path prevents squirting and makes the emitter clog resistant.
• Smooth inner surface allows longer lengths.
• Available in 12, 16, 17, 19 and 25 mm nominal diameter as per metric standard. 5/8", 7/8", 9/8" and 1-3/8" nominal diameter as per US standard.
• Available in wall thickness ranging from 6 to 25 mil (0.15 to 0.63 mm).
• Flexibility in selection of discharges and outlet spacing.
• Uniform water spread gives high distribution uniformity and improves water application efficiency.
• Specially designed Tape Lockfittings are available.
• Minimum 100 micron filtration recommended. However required filtration type and precision depends upon quality of source water.
• Recommended for closely spaced seasonal row crops like sugarcane, cotton, chilly, potato, ground nut, onion, vegetables, oil seeds, banana, strawberry, floriculture etc.
• Recommended for irrigation in green house/ shade house.
• Suitable for subsurface and surface applications.

Drip tape is a thin walled drip line used in drip irrigation. Drip tape is made of Special grade polyethylene material. It is also called as collapsible hose, once pressurized it becomes round and collapses on depressurizing. Being a flat tube it can be supplied on reels containing several thousand feet. The nominal diameter ranges from 12 to 25 mm. It can be used for surface and subsurface applications. Thin walled tapes are suitable for 2-3 seasons but can be used for longer period if used subsurface. Drip tape helps in reduction of initial investment of drip irrigation.