Write a Review
Our Products
Greenhouse
2 Products availableAdapter
2 Products availableOur product range contains a wide range of Poly Tunnels, Green Houses, Turbo Seal Emitter Dripper, Jain Fogger and J - Jets
Manufactured from virgin high performing special grade raw material PE-80 & PE-100.
State-of-the art machinery producing high quality pipes.
With Phase-I and Phase-II approval.
Minimum required strength (MRS) of 8 MPa & 10 MPa.
Suitable for working pressure up to 7.0 bar.
Wide range starting from 20mm to 355mm OD.
50, 100 and 150m coils up to size 110mm.
6m length on all sizes above 110mm.
Specification conforming to IS-14885 & ISO 4437 - SDR17.6, 13.6, 11 & 9.
High resistance to chemical reaction.
Light weight and flexible.
Easy handling and jointing leading to reduced cost.
Easy repair in the event of damage.
No outer painting required.
Very low maintenance cost.
Very low friction.
Outstanding ability to withstand Rapid Crack propagation (RCP).
High resistance to Crack Growth.
Very high abrasion resistances.
Tie-up with Fusion Provida, UK
Fittings manufactured from PE-80 & PE-100 special grade raw materials
Recognized by British Gas PIC, Australian Gas Authorities. DVGW-Germany and many gas authorities all over the world
Wide range of fittings from 20mm to 355mm
Universally adopted Pin-configuration to match with any EF welding machine
Manual and Bar code-both options provided on each fittings.
Operating voltage 40 0.5V (other options available on request).
Natural Gas/ Vaporized LPG Conveyance and Distribution.
Industrial Gases Distribution
Landfill & Leachate Gas Extraction and Conveyance
Gas distribution and water distribution systems.
Jain Polyethylene Gas Pipe are suitable for Gas distribution network both for domestic & industrial consumption.
PE-100 SDR 7 & 9 are suitable for use in cross country gas conveyance pipeline systems.
The simplest form of electro-fusion jointing available.
Robust construction and fully waterproof.
The controller can be supplied with dual output voltage capabilities - 39.5 V and 24V.
Simple step-by-step prompts lead the operator through the jointing process, ensuring that the operator follows the correct installation procedure.
A Specially designed Soft start feature reduces shock loading on the generator.
LCD display.
Over 500 joints record can be stored.
Full data retrieval system in-built which allows for complete joint histories to be recorded and retrieved.
AM-85 Control Box is the latest EF fully automated welding machine from the House of Fusion, UK.
One universal lead for either automatic or manual fittings Colour Coded lead ends indentifies mode of operation.
Barcode Scanner or light pen options.
Facia can be personalised for customer branding.
Prompt after sales service easily available.
Butt Fusion jointing is a method of joining PE pipes using thermal fusion. This technique permits the quick assembly of long continuous joints in a faster and economical way without the use of modified pipe end or couplers. The fused joints are reliable and as strong as the pipe itself thus providing total leak proof system. We also provide experience and skilled satff to conduct and supervise the jointing operations.
Fusion Group UK has developed a new generation of automatic butt fusion machines under the name Gatar, the snappy performer. It incorporates improved design concepts making the machine more efficient and more robust.
| Srl | Property | Units | Requirements | Test Parameters | Test Method |
| 01 | Wall Thickness | mm | PE - 80 & PE -100 SDR series | - | ISO-3126 |
| 02 | Hydrostatic Strength (HS) | h | Failure time > 100 h | PE-80-9.0 MPa-20ºC | ISO-1167 |
| Failure time > 165 h | PE-80-4.6 MPa-80ºC | ||||
| Failure time > 1000 h | PE-80-4.0 MPa-80ºC | ||||
| 03 | Elongation at Break | % | ≥ 350 | - | ISO-6259/3 |
| 04 | Density | Kg/m³ | ≥ 930 | 23ºC | ISO-1183 ISO-1872/1 |
| 05 | Thermal Stability (Oxidation Induction Time) |
Min. | ≥ 20 | 200ºC | ISO TR10837 |
| 06 | Melt Flow Rate | 9/10 Min | 0.2 to 1.1 | 190ºC 5 Kg | ISO-4440/1 |
| 07 | Tensile Strength | MPa | 15 Min | 23ºC | IS: 14885 |
| 08 | Elongation at Break | % | 350 Min | 23ºC | IS: 14885 |
| Fitting Type | Water (Cold) | Gas |
| Coupler | PN 16 | 6 Bar |
| Elbow | PN 16 | 6 Bar |
| Equal Tee | PN 16 / 12.5 | 6 Bar |
| Reducer | PN 16 | 6 Bar |
| Tapping Tee | PN 16 / 12.5 | 6 Bar |
| Branch Saddle | PN 16 / 12.5 | 6 Bar |
| Hydrant Products | PN 12.5 | - - |
| Transition Fittings | PN 12.5 | 6 Bar |
| Fitting Type | Pipe SDR |
| Coupler | 11 |
| Elbow | 11 |
| Equal Tee | 11 |
| Reducer | 11 |
| Tapping Tee | 11 |
| Branch Saddle | 11 |
| Hydrant Products | 11 |
| Transition Fittings | 11 |
| Fitting Type | Pipe SDR |
| Coupler | 11 to 17.6 |
| Elbow | 11 to 17.6 |
| Equal Tee | 11 to 17.6 |
| Reducer | 11 to 17.6 |
| Tapping Tee | 11 to 17.6 |
| Branch Saddle | 11 to 17.6 |
| Hydrant Products | 11 to 17.6 |
| Transition Fittings | 11 to 17.6 |
| Outer Dia. mm |
Wall Thickness in mm | |||||||
| SDR 17.6 | SDR 13.6 | SDR 11 | SDR 9 | |||||
| MIN | MAX | MIN | MAX | MIN | MAX | MIN | MAX | |
| 20.0 | 2.3 | 2.7 | 2.3 | 2.7 | 3.0 | 3.4 | 3.0 | 3.4 |
| 25.0 | 2.3 | 2.7 | 2.3 | 2.7 | 3.0 | 3.4 | 3.0 | 3.4 |
| 32.0 | 2.3 | 2.7 | 2.3 | 2.7 | 3.0 | 3.4 | 3.6 | 4.1 |
| 40.0 | 2.3 | 2.7 | 3.0 | 3.4 | 3.7 | 4.2 | 4.5 | 5.1 |
| 50.0 | 2.9 | 3.3 | 3.7 | 4.2 | 4.6 | 5.2 | 5.6 | 6.3 |
| 63.0 | 3.6 | 4.1 | 4.7 | 5.3 | 5.8 | 6.5 | 7.1 | 8.0 |
| 75.0 | 4.3 | 4.9 | 5.5 | 6.2 | 6.8 | 7.6 | 8.4 | 9.4 |
| 90.0 | 5.2 | 5.9 | 6.6 | 7.4 | 8.2 | 9.2 | 10.1 | 11.3 |
| 110.0 | 6.3 | 7.1 | 8.1 | 9.1 | 10.0 | 11.2 | 12.3 | 13.7 |
| 125.0 | 7.1 | 8.0 | 9.2 | 10.3 | 11.4 | 12.7 | 14.0 | 15.5 |
| 140.0 | 8.0 | 9.0 | 10.3 | 11.5 | 12.7 | 14.1 | 15.7 | 17.2 |
| 160.0 | 9.1 | 10.2 | 11.8 | 13.1 | 14.6 | 16.2 | 17.9 | 19.8 |
| 180.0 | 10.3 | 11.5 | 13.3 | 14.8 | 16.4 | 18.2 | 20.1 | 22.3 |
| 200.0 | 11.4 | 12.7 | 14.7 | 16.3 | 18.2 | 20.2 | 22.4 | 24.8 |
| 225.0 | 12.8 | 14.2 | 16.6 | 18.4 | 20.5 | 22.7 | 25.1 | 27.8 |
| 250.0 | 14.2 | 15.8 | 18.4 | 20.4 | 22.7 | 25.1 | 27.9 | 30.8 |
| 280.0 | 16.0 | 17.7 | 20.6 | 22.8 | 25.4 | 28.1 | 31.3 | 34.6 |
| 315.0 | 17.9 | 19.8 | 23.2 | 25.7 | 28.6 | 31.6 | 35.2 | 38.9 |
| 355.0 | 20.2 | 22.4 | 26.1 | 28.9 | 32.3 | 35.7 | 39.7 | 43.8 |
| 400.0 | 22.8 | 25.2 | 29.4 | 32.5 | 36.4 | 40.2 | 44.7 | 49.3 |
| 450.0 | 25.6 | 28.3 | 33.1 | 36.6 | 41.0 | 45.2 | 50.3 | 55.5 |
| 500.0 | 28.5 | 31.5 | 36.8 | 40.6 | 45.5 | 50.2 | 55.8 | 61.5 |
| 560.0 | 31.9 | 35.2 | 41.2 | 45.5 | 51.0 | 56.2 | - | - |
| 630.0 | 35.8 | 39.5 | 46.3 | 51.1 | 57.3 | 63.2 | - | - |
Net houses are basically naturally ventilated climate controlled. Jain Net houses have a variety of applications, the majority being, growing of vegetables, floriculture, fruit crop growing for export market.
Jain Net houses are built of a Pre-galvanized channel cum tubular structure/ Tubular Structure wherein crops are grown under a favourable controlled environment and other conditions viz. temperature, humidity, light intensity, soil media, disease control, irrigation, Fertigation and other agronomical practices throughout the season irrespective of the natural conditions outside.
In conventional Agronomical practices, the crops are being grown / cultivated in the open field under natural conditions where the crops are more susceptible to sudden changes in climate i.e. temperature, humidity, light intensity, photo period and other conditions due to which the quality, yield of a particular crop can get affected and may be decreased.
Jain Net houses are available in different sizes and constructed as per customer requirement. The sizes vary from as small as 120 Sq. M to 5, 000 Sq M and more.
The degree of sophistication also varies from a simple net house with Insect Net/ Shade Net covering to highly sophisticated, fully automated drip and foggers systems, full scale computerized (fully automated) systems.
|
|
Poly Tunnels are basically naturally ventilated climate controlled. Jain Poly Tunnels have a variety of applications, the majority being, growing of vegetables, floriculture, planting material acclimatization, fruit crop growing for export market.
Jain Poly Tunnels are built of a Pre-galvanized Tubular Structure wherein crops are grown under a favorable controlled environment and other conditions viz. temperature, humidity, light intensity, ventilation, soil media, disease control, irrigation, Fertigation and other agronomical practices throughout the season irrespective of the natural conditions outside.
In conventional Agronomical practices, the crops are being grown / cultivated in the open field under natural conditions where the crops are more susceptible to sudden changes in climate i.e. temperature, humidity, light intensity, photo period and other conditions due to which the quality, yield of a particular crop can get affected and may be decreased.
ain Poly Tunnels are available in different sizes and constructed as per customer requirement. The sizes vary from as small as 96 Sq. M to 500 Sq M and more.
The degree of sophistication also varies from a simple Poly Tunnel with polyethylene film covering to highly sophisticated, fully automated drip and foggers systems, full scale computerized (fully automated) systems.
Poly houses are basically naturally ventilated climate controlled. Jain Poly houses have a variety of applications, the majority being, growing of vegetables, floriculture, planting material acclimatization, fruit crop growing for export market.
Jain Poly houses are built of a Pre-galvanized channel cum tubular structure/ Tubular Structure wherein crops are grown under a favorable controlled environment and other conditions viz. temperature, humidity, light intensity, ventilation, soil media, disease control, irrigation, Fertigation and other agronomical practices throughout the season irrespective of the natural conditions outside.
In conventional Agronomical practices, the crops are being grown / cultivated in the open field under natural conditions where the crops are more susceptible to sudden changes in climate i.e. temperature, humidity, light intensity, photo period and other conditions due to which the quality, yield of a particular crop can get affected and may be decreased.
Jain Poly houses are available in different sizes and constructed as per customer requirement. The sizes vary from as small as 100 Sq. M to 10, 000 Sq M and more.
The degree of sophistication also varies from a simple poly house with polyethylene film covering to highly sophisticated, fully automated drip and foggers systems, PAR lightings, full scale computerized (fully automated) systems.
Jain Poly house Technology is suitable for :
Green houses are climate controlled. Jain Green Houses have a variety of applications, the majority being, off-season growing of vegetables, floriculture, planting material acclimatization, fruit crop growing for export market and plant breeding and varietals improvement.
Jain Green Houses are built of a G.I. structure wherein crops are grown under a favorable artificially controlled environment and other conditions viz. temperature, humidity, light intensity, photo period, ventilation, soil media, disease control, irrigation, Fertigation and other agronomical practices throughout the season irrespective of the natural conditions outside.
In conventional Agronomical practices, the crops are being grown / cultivated in the open field under natural conditions where the crops are more susceptible to sudden changes in climate i.e. temperature, humidity, light intensity, photo period and other conditions due to which the quality, yield of a particular crop can get affected and may be decreased.
Jain Green Houses are available in different sizes and constructed as per customer requirement. The sizes vary from as small as 100 Sq. M to 10, 000 Sq M and more.
The degree of sophistication also varies from a simple polyhouse with polythein sheet covering to highly sophisticated, fully automated systems with Poly carbonate sheet roofing (double walled), PAR lightings, boom irrigation, rolling benches and full scale computerized (fully automated) systems.
Jain Green House Technology is suitable for -
Production of vegetable crops.
Production of off-season flowers, vegetables.
Production of Roses, Carnation, cut-flowers etc.
Plant propagation, raising of seedlings.
Primary and secondary hardening nursery of Tissue cultured plant.
Growth / Production of rare plants, orchids / herbs, medicinal plants.
|
In case you dont have biological waste, you can grow energy crops for biogas production like corn, rosinweed, sweet sorghum, sugarbeat or algae. Also biogas plant can be used as separate business on waste recycling and energy production.
We offer you, Bacterial Blight Freeplanting material.
We offer youJuvenile Planting Materialthat has long life.
We offer you, Guaranteed Survivalof the plants after transplantation in the field.
We offer you, Jain Prunning Technologyto produce large canopy to bear more fruits and sustain their load.
As a result plant gets ready for first flush within 18 months.
We offer youJain Fertigation Technologyfor higher productivity and superior quality of the produce.
| Features and Specifications
Applications
|
Compact Double Union (DU) design.
Manufactured from high performance rigid PVC compound.
Designed for added safety. Accidental loosening of the ball is prevented.
Excellent chemical & corrosion resistance.
Low frictional losses
Chemical resistant nitrile rubber-O-rings ensures leak proof operation for longer period.
Easy to install and dismantle.
Solvent weld, BSP threaded or flanged options.
Available in two seat ring options - economical HDPE seat ring for low pressure applications or leak resistance teflon (PTFE) seat ring for high pressure applications.
Available in 20 to 90 mm ( to 3) sizes.
| | ||
| Features and Specifications
Applications
| ||
Manufactured from high quality PVC compound.
Excellent corrosion and chemical resistance to most acidic and alkaline solutions.
Light weight.
Easy to handle and transport.
Excellent flow characteristics.
Smooth inner wall minimizes frictional losses and scaling due to precipitation.
Available as per IS-4985, DIN-8062 and ISO-1452-2.
Also manufactured to BS-3505/3506, ASTM D1785-84 and ASTM D 2241 on demand.
Available in sizes from 20 mm () to 560 mm (20) as per above standards.
Commonly supplied in 6 m lengths with plain ends or socketed at one end for solvent cement weld (Any other pipe length can be supplied on request).
Used for conveyance of water in drip/sprinkler irrigation systems, lift irrigation systems, surface irrigation systems, subsoil drainage system, potable water supply systems, rising main and distribution lines.
| Nom. Outside Dia. mm | Minimum Wall Thickness in mm | ||||||||
| Pressure Rating in kg/cm² | |||||||||
| 5 | 6 | 6.3 | 8 | 10 | 12.5 | 16 | 20 | 25 | |
| 020 | - | - | - | - | - | - | 1.5 | - | 2.3 |
| 025 | - | - | - | - | - | 1.5 | 1.9 | - | 2.8 |
| 032 | - | - | - | - | 1.6 | 1.9 | 2.4 | - | 3.6 |
| 040 | - | - | 1.5 | 1.6 | 1.9 | 2.4 | 3.0 | - | 4.5 |
| 050 | - | - | 1.6 | 2.0 | 2.4 | 3.0 | 3.7 | - | 5.6 |
| 063 | 1.6 | 1.9 | 2.0 | 2.5 | 3.0 | 3.8 | 4.7 | - | 7.1 |
| 075 | 1.9 | 2.2 | 2.3 | 2.9 | 3.6 | 4.5 | 5.6 | - | 8.4 |
| 090 | 2.2 | 2.7 | 2.8 | 3.5 | 4.3 | 5.4 | 6.7 | - | 10.1 |
| 110 | - | - | 2.7 | 3.4 | 4.2 | 5.3 | 6.6 | 8.1 | 10.0 |
| 125 | - | - | 3.1 | 3.9 | 4.8 | 6.0 | 7.4 | 9.2 | 11.4 |
| 140 | - | - | 3.5 | 4.3 | 5.4 | 6.7 | 8.3 | 10.3 | 12.7 |
| 160 | - | - | 4.0 | 4.9 | 6.2 | 7.7 | 9.5 | 11.8 | 14.7 |
| 180 | - | - | 4.4 | 5.5 | 6.9 | 8.6 | 10.7 | 13.3 | 16.4 |
| 200 | - | - | 4.9 | 6.2 | 7.7 | 9.6 | 11.9 | 14.7 | 18.2 |
| 225 | - | - | 5.5 | 6.9 | 8.6 | 10.8 | 13.4 | 16.6 | - |
| 250 | - | - | 6.2 | 7.7 | 9.6 | 11.9 | 14.8 | 18.4 | - |
| 280 | - | - | 6.9 | 8.6 | 10.7 | 13.4 | 16.6 | 20.6 | - |
| 315 | - | - | 7.7 | 9.7 | 12.1 | 15.0 | 18.7 | 23.2 | - |
| 355 | - | - | 8.7 | 10.9 | 13.6 | 16.9 | 21.1 | 26.1 | - |
| 400 | - | - | 9.8 | 12.3 | 15.3 | 19.1 | 23.7 | 29.4 | - |
| 450 | - | - | 11.0 | 13.8 | 17.2 | 21.5 | 26.7 | 33.1 | - |
| 500 | - | - | 12.3 | 15.3 | 19.1 | 23.9 | 29.7 | 36.8 | - |
| 560 | - | - | 13.7 | 17.2 | 21.4 | 26.7 | - | - | - |
Dimensions as per IS 4985
| Nom. Outside Dia. mm | Minimum Wall Thickness in mm | |||||
| Pressure Rating in kg/cm² | ||||||
| 2.5 | 4.0 | 6.0 | 8.0 | 10.0 | 12.5 | |
| 020 | - | - | - | - | 1.1 | 1.4 |
| 025 | - | - | - | 1.2 | 1.4 | 1.7 |
| 032 | - | - | - | 1.5 | 1.8 | 2.2 |
| 040 | - | - | 1.4 | 1.8 | 2.2 | 2.8 |
| 050 | - | - | 1.7 | 2.3 | 2.8 | 3.4 |
| 063 | - | 1.5 | 2.2 | 2.8 | 3.5 | 4.3 |
| 075 | - | 1.8 | 2.6 | 3.4 | 4.2 | 5.1 |
| 090 | 1.3 | 2.1 | 3.1 | 4.0 | 5.0 | 6.1 |
| 110 | 1.6 | 2.5 | 3.7 | 4.9 | 6.1 | 7.5 |
| 125 | 1.8 | 2.9 | 4.3 | 5.6 | 6.9 | 8.5 |
| 140 | 2.0 | 3.2 | 4.8 | 6.3 | 7.7 | 9.5 |
| 160 | 2.3 | 3.7 | 5.4 | 7.2 | 8.8 | 10.9 |
| 180 | 2.6 | 4.2 | 6.1 | 8.0 | 9.9 | 12.2 |
| 200 | 2.9 | 4.6 | 6.8 | 8.9 | 11.0 | 13.6 |
| 225 | 3.3 | 5.2 | 7.6 | 10.0 | 12.4 | 15.3 |
| 250 | 3.6 | 5.7 | 8.5 | 11.2 | 13.8 | 17.0 |
| 280 | 4.1 | 6.4 | 9.5 | 12.5 | 15.4 | 19.0 |
| 315 | 4.6 | 7.2 | 10.7 | 14.0 | 17.3 | 21.4 |
| 355 | 5.1 | 8.1 | 12.0 | 15.8 | 19.6 | 24.1 |
| 400 | 5.8 | 9.1 | 13.5 | 17.8 | 22.0 | 27.2 |
| 450 | 6.5- | 10.3 | 15.2 | 20.0 | 24.8 | 30.5 |
| 500 | 7.2 | 11.4 | 16.9 | 22.3 | 27.5 | 33.9 |
| 560 | 8.1 | 12.8 | 18.9 | 24.9 | 30.8 | 38.0 |
PE pipes up to 1600mm diameter are effectively used in river water infiltration galleries for harvesting water even during dry times.
Subsoil drainage system without using geo-textile has become a possibility with the PE pipes due to their very fine slits/perforations which is not possible with the conventional pipes.
River-water-intake infiltration gallery
Sub surface drainage system for roads/highways
Sub surface drainage system for draining excess water from lawns/gardens/agricultural farms
Sub surface drainage for large construction water logged sites
Collection of methane & leachate gas from landfill dump
Decomposition of citys solid waste in dumping yards
Sea water intake assembly
Sub surface drainage for car test-tracks & formula one racing tracks
Airport runway sub surface drainage systems
Sub surface drainage for sport stadium lawns
Water re-circulation channels for swimming pools
Cooling towers in ice factories
Rugged reinforced plastic construction.
Protects valves from damage due to lawn mowers, other garden equipments and vandalism.
Provides convenient access to valves installed below ground level.
Robust top cover with non slippery grips.
Leaf green colour of the cover matches to surrounding lawn/turf.
Heavy duty extended bottom keeps the valve box stable and firmly set in the soil.
Special heavy duty model available.
Available in circular and rectangular models.
Jain Co-Extrusion process was developed in-house by JAINS in their R&D facility during 1993.
Jain HDPE Ducts (permanently lubricated) is the result of innovative development in co-extrusion by JAINS.
It is the versatile and unique solution for High Speed Air Blowing of Optical Fibre Cable.
Jain Cable Ducts are manufactured with state-of-the-art machinery using latest processing technology and fulfill the performance requirement of National and International specifications.
Approved by BSNL under TEC specification G/CDS-08/02 November 2004.
Approved vendor and supplier to PGCIL, IOCL, GSPL, BSNL, MTNL Tata Tele, Hutch in India and also many customers in other countries as well. Can specially deliver tailor-made as per specifications to suit customers requirement.
Supplied in coils of various lengths upto to 110 mm.
Supplied with pre-inserted PP rope on request.
ExcelPVC Glo Sheet is chemically foamed, rigid, light weight extruded sheet with fine & homogenous closed cell structure having rigid, smooth & glossy layer on both sides.
ExcelPVC Pro Sheet is chemically foamed, rigid, light weight extruded sheet with fine & homogenous closed cell structure with close thickness tolerance. Sheets are inspected 100% for surface defects.
Fabricated from G.I. Pipes to give stable support.
Easy to carry and install.
Suitable to hold different riser sizes such as 1, 1, 2 and above.
Wide leg support gives better stability against sudden jerks of rain gun rotation.
Provides stable support even on hilly slopes.
Available in standard riser length of 1, 1, 2 and 3m other riser lengths can be supplied on demand.
Telescopic legs options available as a special request to provide flexibility in different terrain.
Female BSP threaded or male quick connect option for inlet connection.
Standard connection available is BSP female threaded. Other connections options available are, - Quick Connect male connector - Plastic Clamp- Quick Connect male connector - Single Metal Clamp- Quick Connect male connector - Double Metal Clamp- Quick Connect male connector - Metal Latch
Jain Micro Ducts are specifically made for installation in the existing (new or old, empty or preoccupied) HDPE / PVC ducts by blowing, jetting or pulling technique. The ducts can be bunched & blown in various combinations & colors thus allowing extra channels for future cabling needs & increased pathway. Its low sliding friction aids in easier blowing & jetting of micro ducts & allows longer pulling distance thus increasing duct integrity resulting in quality installation at lower cost.
Jain Micro Ducts are available in 7mm, 10mm & 14 mm OD with different wall-thicknesses.
Micro ducts are available with permanently lubricated smooth inner wall or permanently lubricated ribbed inner wall.
Jain Anti-Rodent Duct
Ducts are generally installed by direct burial method. At many places rodents are present even at depth of more than one meter below ground level. Unlike human beings the front teeth of rodents grow throughout their life., hence to trim it they chew soft materials like PE & PVC pipes to keep their their teeth within size. This results in damages to the pipes & the cable in it. Jain anti rodents ducts provides the best solution to such problems by incorporating a bitterent in the pipe to dissuade rodents from chewing it. Antirodent ducts are tested at institute for Toxicological Studies, Pune for its antirodent properties. Antirodent ducts are available in various sizes starting from 32 mm onwards.
Jain Fire Retardant Duct
Our constant endavour in brining better products to our valued customers we are pleased to introduce Jain Fire Retardant Ducts manufacture as per UL94-V2 specification. State of art testing facility is available in house (flame chamber from Altas, USA) for conducting the fire retardant test.
| S.No. | Parameter | Specification / Tolerance |
| 1 | Density | 0.940 to 0.958 g/cc at 27ºC |
| 2 | Melt Flow Rate | 0.2 to 1.10 gm /10 Minute at 190ºC & 5 kg load |
| 3 | Minimum Bend Radius | No cracking, splitting, breaking or permanent reduction in diameter when bend to 180º at radius of 10 times the diameter |
| 4 | Internal Pressure Test | 5 Minutes at 27ºC & Induced stress at 3.8 mpa. |
| 5. | Internal Coefficient of friction | Max 0.1 at 6.8 Kg load |
Dimensions Dimensions (in mm) of Silicoat PE Micro Duct
| Nominal Size | Outer Diamter | Wall Thickness | Inner Layer Wall Thickness | Ovality | |||
| OD | ID | MIN | MAX | MIN | MAX | MIN | |
| 7.0 | 5.5 | 6.9 | 7.1 | 0.65 | 0.75 | 0.10 | 0.20 |
| 10.0 | 5.5 | 9.9 | 10.1 | 2.15 | 2.25 | 0.10 | 0.20 |
| 10.0 | 8.0 | 9.9 | 10.1 | 0.9 | 1.0 | 0.10 | 0.20 |
| 10.0 | 7.6 | 9.9 | 10.1 | 1.1 | 1.2 | 0.10 | 0.20 |
| 12.0 | 8.0 | 11.9 | 12.1 | 1.90 | 2.10 | 0.10 | 0.20 |
| 12.0 | 9.6 | 11.9 | 12.1 | 0.90 | 1.0 | 0.10 | 0.20 |
The New Jain Jet offers the latest in precision molding technology ensuring it is the best micro jet on the market! Newly redesigned, the Jain Jet has the cleanest and sharpest patterns in the industry to help ensure that each plant receives the right amount of water at the right time. The Jain Jet offers the widest range of flow rate and distribution patterns in the industry to be able to meet all your design and application needs.
Jain Photovoltaic Modules are made from high efficiency Mono / Multi Crystalline solar cells The cells used are of 14.0% to 17.5% efficiency. The cells are encapsulated in a low iron content, high transmissivity, tempered glass using UV stable Ethylene Vinyl Acetate (EVA) sheets. The premium quality back sheet protects the cells from the environmental conditions. The laminates are framed with strong and anodized aluminum profile with multiple holes for ease of installation. PV modules are fitted with 2/3/4 terminal junction box, depending on application. The mdoules with 4 terminal junction boxes are generally fitted with by-pass diodes.
Manufactured from virgin pipe grade raw materials (PE80, PE100).
Excellent corrosion and chemical resistance. Inert to most acidic and alkaline solutions.
High flow characteristics.
Light in Weight.
Easy to handle & transport.
Excellent flexibility combined with strength.
Good abrasion resistance.
Smooth inner walls minimises frictional losses.
Safe for potable water supply.
Manufactured as per IS-4984, ISO-4427, DIN8074, ASTM D 3035 and BS-6437 standards in PE-63, PE-80 and PE-100 grades.
Manufactured from 20 to 2500 mm sizes at various pressure rating from 2.5 to 16 kg/cm (35.5 to 227.5 psi).
Upto 6" in straight lengths and coils. Higher sizes in standard and other straight lengths only.
Lift and gravity water supply systems.
Micro & sprinkler irrigation systems.
Sewerage pumping and effluent disposal systems.
Column pipes for submersible pumps.
A packaged home lighting system which can supply required power for 9 W / 11 W Compact Fluorescent Lamp (CFL) & 20 W Fan / TV (B&W)/ The unit consists of Lead Acid Tubular Battery, Charge Controller with electronic circuitry, charging cable and SPV Panel. Systems for more lighting hours and/or more lamps and fans / TV (B&W) are available on request.
63/52, 75/62, 90/77, 125/103, 200/173, 250/213 mm OD/ID
Double Wall Corrugated (DWC)63/51, 75/61, 90/76, 125/101, 200/172, 250/213 mm OD/ID
StandardsIS 14930 (Part 2) - 2001, TEC Spec GR/DWC-34/01 SEP 2007, EN 13476-1:2007 (E)
LengthAvailable in straight lengths of 6/12 meters for all sizes and in coils upto 125 mm OD in different colours.
ExcelPVC Integral Free Foam Sheet is chemically foamed, extruded rigid, light weight sheet with fine & homogeneous closed cell structure & smooth, glossy, hard surface finish on both sides.
| Features and Specifications
Applications
|
Drip Hose and PE tubes are used as a submain/lateral pipe in micro irrigation system. These hose and tubes are UV stabilized and are able to withstand environmental effects.
Jains Hose and Tubes are manufactured from virgin special grade polyethylene. Jain Polyethylene hose and tubes are tested in accordance to Bureau of Indian Standards (BIS), American Society of Agriculture Engineer (ASAE), and American Standard for Testing and Materials (ASTM). Jain products passes through stringent quality tests in our advance ultra modern laboratory before it reaches you.
A Full Line of Sprinklers, for Every Crop Needs.
Plastic mini sprinkler is the heart of Rainport. All these sprinklers are specially designed to make it suitable for Rainport system. Being light weight, even a simple 8mm riser rod can withstand its load and vibrations during operation. Hydrodynamic design gives high distribution uniformity and gentle precipitation. Covers larger area with minimal energy requirements.
Jain Irrigation offers wide variety of plastic sprinklers to be used with Rainport system. You can choose the model according to functionality, type of crop, type of soil, type of terrain, availability of pressure, water and electrical availability etc.
Manufactured from high quality PVC compound.
Excellent corrosion and chemical resistance to most acidic and alkaline solutions.
Exceptionally durable and highly resilient.
Moulded with precision to match the Pipes.
Conforming to IS 7834, IS 554, ISO 727, DIN 8063 standards.
Nominal pressure, PN16 with reduced safety factor of 2.5.
Note :
PVC Injection moulded fittings are also available in lower pressure rating of 6 kg/cm (57psi) suitable for flow irrigation and low pressure piping network (Tested at 200 / 2.62 times nominal working pressure).
Fabricated fittings available for all sizes and pressure classes.
Quick Fix Fittings (fabricated) available for sizes from 63mm to 315mm and pressure classes upto 12.5 kg/cm.
Repair coupler for all sizes & pressure classes available.
| Code | Size mm | D mm | S mm |
L mm | |
| Min. | Max. | ||||
| DC020 | 20 | 20.1 | 20.3 | 16.0 | 42.0 |
| DC025 | 25 | 25.1 | 25.3 | 19.0 | 41.5 |
| DC032 | 32 | 32.1 | 32.3 | 22.0 | 47.5 |
| DC040 | 40 | 40.1 | 40.3 | 26.0 | 55.5 |
| DC050 | 50 | 50.1 | 50.3 | 31.0 | 65.5 |
| DC063 | 63 | 63.1 | 63.3 | 39.0 | 82.0 |
| DC075 | 75 | 75.1 | 75.3 | 44.0 | 92.5 |
| DC090 | 90 | 90.1 | 90.3 | 51.0 | 107.5 |
| DC110 | 110 | 110.1 | 110.4 | 61.0 | 129.5 |
Roshan Shah (Jain Irrigation Systems Ltd.)
41 / 43, Jain House, Police Court Lane,, Fort, Mumbai, Maharashtra - 400001
Share us via
