Our Products
Plumbing Pipes
2 Products availablePolypropylene Fittings
1 Products availableDispensers & Vending Machines
1 Products availableFountains & Fountain Accessories
1 Products availableAgricultural Pipes
1 Products availableGas Cylinder Accessories
1 Products availableDrainage Product
1 Products availableIndustrial Plastic Pipes
1 Products availableOur product range contains a wide range of Drip Tubes, Spray Heads, Jets AND Foggers and rainguns
Manufactured from virgin high performing special grade raw material PE-80 & PE-100.
State-of-the art machinery producing high quality pipes.
With Phase-I and Phase-II approval.
Minimum required strength (MRS) of 8 MPa & 10 MPa.
Suitable for working pressure up to 7.0 bar.
Wide range starting from 20mm to 355mm OD.
50, 100 and 150m coils up to size 110mm.
6m length on all sizes above 110mm.
Specification conforming to IS-14885 & ISO 4437 - SDR17.6, 13.6, 11 & 9.
High resistance to chemical reaction.
Light weight and flexible.
Easy handling and jointing leading to reduced cost.
Easy repair in the event of damage.
No outer painting required.
Very low maintenance cost.
Very low friction.
Outstanding ability to withstand Rapid Crack propagation (RCP).
High resistance to Crack Growth.
Very high abrasion resistances.
Tie-up with Fusion Provida, UK
Fittings manufactured from PE-80 & PE-100 special grade raw materials
Recognized by British Gas PIC, Australian Gas Authorities. DVGW-Germany and many gas authorities all over the world
Wide range of fittings from 20mm to 355mm
Universally adopted Pin-configuration to match with any EF welding machine
Manual and Bar code-both options provided on each fittings.
Operating voltage 40 0.5V (other options available on request).
Natural Gas/ Vaporized LPG Conveyance and Distribution.
Industrial Gases Distribution
Landfill & Leachate Gas Extraction and Conveyance
Gas distribution and water distribution systems.
Jain Polyethylene Gas Pipe are suitable for Gas distribution network both for domestic & industrial consumption.
PE-100 SDR 7 & 9 are suitable for use in cross country gas conveyance pipeline systems.
Technical Specifications
Srl | Property | Units | Requirements | Test Parameters | Test Method |
01 | Wall Thickness | mm | PE - 80 & PE -100 SDR series | - | ISO-3126 |
02 | Hydrostatic Strength (HS) | h | Failure time > 100 h | PE-80-9.0 MPa-20ºC | ISO-1167 |
Failure time > 165 h | PE-80-4.6 MPa-80ºC | ||||
Failure time > 1000 h | PE-80-4.0 MPa-80ºC | ||||
03 | Elongation at Break | % | ≥ 350 | - | ISO-6259/3 |
04 | Density | Kg/m³ | ≥ 930 | 23ºC | ISO-1183 ISO-1872/1 |
05 | Thermal Stability (Oxidation Induction Time) |
Min. | ≥ 20 | 200ºC | ISO TR10837 |
06 | Melt Flow Rate | 9/10 Min | 0.2 to 1.1 | 190ºC 5 Kg | ISO-4440/1 |
07 | Tensile Strength | MPa | 15 Min | 23ºC | IS: 14885 |
08 | Elongation at Break | % | 350 Min | 23ºC | IS: 14885 |
Poly houses are basically naturally ventilated climate controlled. Jain Poly houses have a variety of applications, the majority being, growing of vegetables, floriculture, planting material acclimatization, fruit crop growing for export market.
Jain Poly houses are built of a Pre-galvanized channel cum tubular structure/ Tubular Structure wherein crops are grown under a favorable controlled environment and other conditions viz. temperature, humidity, light intensity, ventilation, soil media, disease control, irrigation, Fertigation and other agronomical practices throughout the season irrespective of the natural conditions outside.
In conventional Agronomical practices, the crops are being grown / cultivated in the open field under natural conditions where the crops are more susceptible to sudden changes in climate i.e. temperature, humidity, light intensity, photo period and other conditions due to which the quality, yield of a particular crop can get affected and may be decreased.
Jain Poly houses are available in different sizes and constructed as per customer requirement. The sizes vary from as small as 100 Sq. M to 10, 000 Sq M and more.
The degree of sophistication also varies from a simple poly house with polyethylene film covering to highly sophisticated, fully automated drip and foggers systems, PAR lightings, full scale computerized (fully automated) systems.
PE pipes up to 1600mm diameter are effectively used in river water infiltration galleries for harvesting water even during dry times.
Subsoil drainage system without using geo-textile has become a possibility with the PE pipes due to their very fine slits/perforations which is not possible with the conventional pipes.
River-water-intake infiltration gallery
Sub surface drainage system for roads/highways
Sub surface drainage system for draining excess water from lawns/gardens/agricultural farms
Sub surface drainage for large construction water logged sites
Collection of methane & leachate gas from landfill dump
Decomposition of citys solid waste in dumping yards
Sea water intake assembly
Sub surface drainage for car test-tracks & formula one racing tracks
Airport runway sub surface drainage systems
Sub surface drainage for sport stadium lawns
Water re-circulation channels for swimming pools
Cooling towers in ice factories
Pipes made from Polyethylene (PE) is a cost effective answer for a number of piping problems in Metropolitan, Municipal, Industrial, Underwater, Mining, Landfill Gas extraction, Cable duct and agricultural applications. It has been tested and proven effective for underground, above ground, surface, under water as well as floating pipe applications.
Polyethylene pipes both High Density (HDPE) and Medium Density (MDPE) can carry potable water, wastewater, slurries, chemicals, hazardous wastes, cables and compressed gases as well as oils. Polyethylene pipes have a long and successful service experience to the gas oil, mining and water utility industries. PE pipes have the lowest repair frequency per Kilometer of pipe per year compared with all other pipe materials used for urban water and gas distribution.
Jain PE pipes are strong, extremely tough and long lasting. Jain PE pipes will meet all your requirements of long service, trouble-free installation, flexibility, resistance to corrosion and chemicals.
Jain Irrigation Systems Ltd. (JISL) derives its name from the pioneering work it did for the Micro Irrigation Industry in India. However, there is more to Jain Irrigation than Irrigation. Jain Piping Division is the largest producer of Thermoplastic piping systems for all conceivable applications with pipes ranging from 3 mm to 1600 mm in diameter and in different pressure ratings.JISL has a production capacity of over 3, 00, 000 M.T. per annum. JISL is the only manufacturer to own DSIR approved R&D setup with state-of-the-art facilities. The pipes are manufactured confirming to IS, DIN, ISO, ASTM, TEC and other customized specifications. The Piping Division includes PE, PVC Pipes and Fittings catering to the urban and rural infrastructure needs of the country apart from Irrigation needs of the farmers. Jain CPVC plumbing pipes & Fittings for Hot water application is yet another product which will be a forward integration of the above group of infrastructure products. This will convey the hot water with efficiency combined with economy and have a long life.
Standard and RangeJain Plumbing CPVC pipes are manufactured to IS 15778, from specially formulated compound conforming to or exceeding the requirements of CPVC compound of cell classificati on " D.P.110-2-3-2 " as per IS 15225.
Jain Irrigation Systems Limited (JISL), has an unmatched and enviable performance track record as a Total Solution Provider for various thermoplastics piping systems such as for Agriculture, Water, Gas, Telecom, Utility, Sewerage, Chemicals, Industrial Effluents, Mining, Slurry, Coal ash, SWR, Sub soil drainage, Ground water tapping, Lift irrigation, Micro irrigation & sprinkler irrigation, Hand pumps, House service Connections etc.
We are the only manufacturer of 1600 mm dia HDPE pipe and its fittings in India . We have with us more than 9000 associates worldwide and revenue of more than 60 billion rupees with manufacturing plants in 28 locations across the globe, having network of more than 3000 Distributors & Dealers worldwide.
JISL from its noble range brings to you JAIN Plumbing UPVC ASTM Pips and Fittings systems for all your domestic and high pressure cold water plumbing requirments.
Jain Plumbing high quality UPVC ASTM Plumbing pipes and fittings are manufactured in line with major international standards and parameters. The range encompasses both Solvent Welded and Threaded piping pertaining to various applications from residential and commercial to industrial plumbing.
Features & Advantages
Sr. No. | Nominal Pipe Size |
Pipe Outside Diameter (avg) |
Pipe Minimum Wall Thickness (MM) | ||
(Inch) | (MM) | Sch 40 | Sch 80 | Sch 120 | |
1 | 1½" | 21.34 | 2.77 | 3.73 | 4.32 |
2 | ¾"” | 26.67 | 2.87 | 3.91 | 4.32 |
3 | 1" | 33.4 | 3.38 | 4.55 | 5.08 |
4 | 1¼" | 42.16 | 3.56 | 4.85 | 5.46 |
5 | 1½" | 48.26 | 3.68 | 5.08 | 5.72 |
6 | 2" | 60.32 | 3.91 | 5.54 | 6.35 |
7 | 2½" | 73.02 | 5.16 | 7.01 | 7.62 |
8 | 3" | 88.90 | 5.49 | 7.62 | 8.89 |
9 | 4" | 114.30 | 6.02 | 8.56 | 11.10 |
10 | 5" | 141.30 | 6.55 | 9.52 | 12.70 |
11 | 6" | 168.28 | 7.11 | 10.97 | 14.27 |
12 | 8" | 219.08 | 8.18 | 12.70 | 18.24 |
13 | 10" | 273.05 | 9.27 | 15.06 | 21.41 |
14 | 12" | 323.85 | 10.31 | 17.45 | 25.40 |
Size | Pressure Rating | |||||
Sch 40 | Sch 80 | Sch 120 | ||||
Inch | PSI | Kg/cm2 | PSI | Kg/cm2 | PSI | Kg/cm2 |
1/2" | 600 | 42.02 | 850 | 59.52 | 1010 | 70.73 |
3/4" | 480 | 33.61 | 690 | 48.32 | 770 | 53.92 |
1" | 450 | 31.51 | 630 | 44.12 | 720 | 50.42 |
11/4" | 370 | 25.91 | 520 | 36.41 | 600 | 42.02 |
11/2" | 330 | 23.11 | 470 | 32.91 | 540 | 37.82 |
2" | 280 | 19.61 | 400 | 28.01 | 470 | 32.91 |
21/2" | 300 | 21.01 | 420 | 29.41 | 470 | 32.91 |
3" | 260 | 18.21 | 370 | 25.91 | 440 | 30.81 |
4" | 220 | 15.41 | 320 | 22.41 | 430 | 30.11 |
5" | 190 | 13.31 | 290 | 20.31 | 400 | 28.01 |
6" | 180 | 12.61 | 280 | 19.61 | 370 | 25.91 |
8" | 160 | 11.20 | 250 | 17.51 | 380 | 26.61 |
10" | 140 | 9.80 | 230 | 16.11 | 370 | 25.91 |
12" | 130 | 9.10 | 230 | 16.11 | 340 | 23.81 |
Jain Irrigation Systems Limited (JISL), has an unmatched and enviable performance track record as a Total Solution Provider for various thermoplastics piping systems such as for Agriculture, Water, Gas, Telecom, Utility, Sewerage, Chemicals, Industrial Effluents, Mining, Slurry, Coal ash, SWR, Sub soil drainage, Ground water tapping, Lift irrigation, Micro irrigation & sprinkler irrigation, Hand pumps, House service Connections etc.
We are the only manufacturer of 1600 mm dia HDPE pipe and its fittings in India . We have with us more than 9000 associates worldwide and revenue of more than 60 billion rupees with manufacturing plants in 28 locations across the globe, having network of more than 3000 Distributors & Dealers worldwide.
JISL from its noble range brings to you JAIN Plumbing UPVC ASTM Pips and Fittings systems for all your domestic and high pressure cold water plumbing requirments.
Jain Plumbing high quality UPVC ASTM Plumbing pipes and fittings are manufactured in line with major international standards and parameters. The range encompasses both Solvent Welded and Threaded piping pertaining to various applications from residential and commercial to industrial plumbing.
Features & AdvantagesSWR Pipe Dimension Chart
Nominal outside diameter (D) mm | Tolerance on outside diameter mm | Wall Thickness Type-A(A)mm | Wall Thickness Type-B(A)mm | Wall Thickness (Nonstandard)(t)mm | |||
min | max | min | max | min | max | ||
75 | +0.3 | 1.8 | 2.2 | 3.2 | 3.8 | 1.4 | 1.6 |
90 | +0.4 | 1.9 | 2.3 | 3.2 | 3.8 | - | - |
110 | +0.4 | 2.2 | 2.7 | 3.2 | 3.8 | 1.5 | 1.65 |
160 | +0.5 | 3.2 | 3.8 | 4.0 | 4.6 | 2.7 | 3.2 |
Jain Solar water pumping system is a stand-alone system operating on power generated by Solar Photovoltaic panels.
The power generated by solar panels is used for operating DC surface centrifugal mono-block pump set for lifting water from open well or water reservoir for minor irrigation and drinking water purpose. The system requires a shadow-free area for installation of the Solar Panels.
With Jain Solar Water Heater you will have hot water when you want it, have no recurring cost of electricity, years of trouble free use and the assurance of a great service backup from the Jain Group. In other words total peace of mind! Whats more, you will be helping the environment too !.
Our natural resources are finite and thats why the use of non-conventional methods of heating water has begun. These are inexpensive, safe, reliable and are easy to maintain. More importantly, they are eco-friendly and provide trouble free service for years together.
Jain Photovoltaic Modules are made from high efficiency Mono / Multi Crystalline solar cells The cells used are of 14.0% to 17.5% efficiency. The cells are encapsulated in a low iron content, high transmissivity, tempered glass using UV stable Ethylene Vinyl Acetate (EVA) sheets. The premium quality back sheet protects the cells from the environmental conditions. The laminates are framed with strong and anodized aluminum profile with multiple holes for ease of installation. PV modules are fitted with 2/3/4 terminal junction box, depending on application. The mdoules with 4 terminal junction boxes are generally fitted with by-pass diodes.
Emitting Pipe play a key role in drip irrigation systems. Jain Emitting pipes are manufactured from virgin special grade polyethylene. Resistant to Ultra Violet (UV) radiation and other environmental effects. Jain Emitting Pipe passes through stringent quality tests confirming to Indian and International Standards .The nominal diameter ranges from 12 mm to 25 mm.
Drip Hose and PE tubes are used as a submain/lateral pipe in micro irrigation system. These hose and tubes are UV stabilized and are able to withstand environmental effects.
Jains Hose and Tubes are manufactured from virgin special grade polyethylene. Jain Polyethylene hose and tubes are tested in accordance to Bureau of Indian Standards (BIS), American Society of Agriculture Engineer (ASAE), and American Standard for Testing and Materials (ASTM). Jain products passes through stringent quality tests in our advance ultra modern laboratory before it reaches you.
Drippers are used for online drip irrigation system. Each of our Dripper is designed to suit difficult soil conditions, water needs of various crops, difficult water quality and numerous requirements of agriculture.
Innovative design, precision molding, use of quality raw material and stringent quality tests are the key factors behind the sustainable and efficient performance of our online dripper for Drip Irrigation. Narrow cross shaped inlet acts as a filter and colored cap represents flow rate and facilitates easy identification. Manufactured from virgin plastic for stable performance. These devices are UV stabilized and are able to withstand environmental effect. Recommended for orchards, fruit crops, vegetables, nurseries & flowers.
Water is not found in its purest form in nature. It is always contaminated with physical, chemical & biological impurities. Proper filtration is of much importance to prevent low pressure diffuser like emitters from clogging. Our wide range of water filters are standing like watchdogs to protect your system from clogging hazards. Sand Separators to remove silt, sand from your water, media filters to remove organic impurities like algae, trash, leaves etc. from water and complete range of screen filters to remove any physical impurities from water are available in our filtration range. Stable performance maximum filtration efficiency and minimum maintenance are some of the common features of our filters.
We provide complete solution for Control and Safety Valves. Our high performance valves are with manual and or automatic control. Our Plastic valves are cost effective, easy to install & maintain, value driven and customized for specific requirement. We also provides turnkey services for survey, designing & installation.
Poly fittings are manufactured from reinforced PPCP, the provide excellent chemical and weather resistance. Jain Poly Fittings and Accessories help you to obtain a most reliable irrigation system. Leak proof, snap proof fittings. Jains poly fittings and accessories are made from the best materials under strict quality control. They are made for long term reliable service, easy to assemble and disassemble.
Spray Heads, Jets & Foggers are used to maintain humidity or temperature control in greenhouse, shade house.
Spray Heads, Jets & Foggersare manufactured from good quality virgin raw material, easy to install, reliable performance are some of the common features of our fogger and misters. It can be supplied with Leakage Prevention Device (LPD) for pulsed operation and to prevent low head drainage. Ideal for plant propagation, recommended for climate control in Greenhouse / Shade house. Suitable for crops which require maintaining micro climate in the canopy area.
RainportSprinkler Systems is a mini irrigation system i.e., laterals and sprinklers can be easily shifted from one place to other. Reinstallation of the system is also easy and consumes less time and labour. It overcomes all the limitations of conventional sprinkler irrigation system and yet meets the high standards of effective irrigation principles such as:
High distribution uniformity.
Controlled application rate.
Gentle precipitation, low droplet impact on soil structure and no foliage damage.
Short irrigation cycles to provide optimal growing conditions with highly accessible water and nutrient in controlled wetted and aerated soil profile. in Rainport irrigation system, flexible polyethylene tubes are used as a laterals and high performance low weight plastic sprinklers are connected to these tubes using easily detachable connectors. Sprinklers are fixed on MS riser rods.
Overhead Sprinklers are designed for a wide range of general field uses portable, semi-portable and solid set systems, to meet the demanding needs of modern, economic irrigation systems. Featuring a sophisticated field tested construction and the use of highly corrosion resistant materials, they ensure fall safe operation and long life requiring a minimum maintenance. we have a wide range of overhead sprinkler starting from small nozzle size with low flow rates to large nozzle size with high flow rates.
Plastic Impact Sprinklers are designed for a wide range of general field uses portable, semi-portable and solid set systems, to meet the demanding needs of modern, economic irrigation systems. Featuring a sophisticated field tested construction and the use of highly corrosion resistant materials, they ensure fall safe operation and long life requiring a minimum maintenance. we have a wide range of Plastic Impact Sprinkler starting from small nozzle size with low flow rates to large nozzle size with high flow rates.
Jain PVC Plastic Pipes and Pipe Fitting are available in vast range and in various materials, Whatever be your application. We have the Piping System - that can be installed on surface, buried, slip lined, trench less, floating and submerged. Jain PVC Plastic pipes can be used in Fluids transport include, For Lifting, Transporting, Conveying, Distributing Disposing or Tapping of Water, waste-water (drainage & sewage), compressed gases/air, odorous and corrosive gasses, chemicals and hazardous wastes/effluents. Solids conveyed include coal ash, slurries, sand and cables.
Used for conveyance of water in drip/sprinkler irrigation systems, lift irrigation systems, surface irrigation systems, subsoil drainage system, potable water supply systems, rising main and distribution lines.
Drip tape is a thin walled drip line used in drip irrigation. Drip tape is made of Special grade polyethylene material. It is also called as collapsible hose, once pressurized it becomes round and collapses on depressurizing. Being a flat tube it can be supplied on reels containing several thousand feet. The nominal diameter ranges from 12 to 25 mm. It can be used for surface and subsurface applications. Thin walled tapes are suitable for 2-3 seasons but can be used for longer period if used subsurface. Drip tape helps in reduction of initial investment of drip irrigation.