Post Buy Requirement
JA
Ambala, Haryana, India
Add Review

Our Product / Services

  1. Products / Services 226 Products / Services available

Products / Services #9438590

Leading Manufacturer, Supplier & Retailer of See-Saw, Slide Ladder, Schering Bridge Trainer, Schering Bridge and Brinell Hardness Tester.

See-Saw

  • Size of see saw(L x H X base width) (in mm) 1180 x 320 x 450
  • Total seating base(in mm) 220
  • Gap between handle and front side(in mm) 140
  • Size of seating base(bottom)(Dia x Dep)(in mm) 90 x 50
  • Diameter of rubber balloon after blowing(in mm) 180
  • Colour of see-saw RED
  • Type of manufacturing of base of see saw Blow moulding
  • Type of manufacturing of middle part of see saw NA
  • Quantity per pack 1
  • Packing Type Poly bag packing
View Complete Details

Slide Ladder

  • Step rise of each stair 75mm
  • Length of the stair panel 300mm
  • Overall length of the product (when assembled) 1430mm
  • Minimum overall plastic weight of product 12 kg
  • Length of sliding part 1130mm
  • Overall height of the product (when assembled) 860mm
  • Overall width of the product (when assembled) 390mm
  • Slide ladder / part of the slide should not have sharp edges or corners (safety point of view) YES
  • Colour and Finish (other indeterminable parameters) As per approved sample
  • The complete set should be properly packed that it should not damage during transit YES
  • Made-up ingredients should not be harmful to kids YES
  • Slide ladder made up of virgin grade polyethylene plastic Virgin Polyethylene
View Complete Details

Schering Bridge Trainer

  • Object To Measure the Value of Unknown Capacitance by Schering Bridge
  • Features Schering Bridge circuit with arms values, ±12 VDC at 100 mA, IC Regulated Power Supply internally connected, 1KHz Sine wave oscillator having output 0-15 Vpp, Audio amplifier and speaker for null detector, Three unknown value of capacitors selectable by a ba
  • Weight 3 Kg. (Approx.)
  • Dimension W 340 x H 110 x D 210210
View Complete Details

Schering Bridge

  • Detector For detecting small AC signals in the output, Null Detector is in-built with digital display
  • Circuit Diagram 4mm socket are provided for making connections.
  • Unknown Value Five unknown value are provided on the board selected by a Rotary switch.
  • R1 R2 Ratio Dial having step of 1, 10, 100 and 1000 Ohms.
  • R Decade dial of x1 ohms.
  • C1 Two Decade dial of x0.001 mfd & x0.01mfd.
  • C2 Internally fixed of value 0.001mfd.
View Complete Details

Brinell Hardness Tester

  • Max. Testing Height 254 mm
  • Depth of Throat 150 mm
  • Size of Base 255 x 495 mm
  • Machine Height 860 Mm
  • Net Weight (Approx.) 210 kg.
  • Specification The machine is designed with a Hydraulic Power pack and control circuit for effortless loading unloading operation, Brinell Hardness Tester - Basic machine design, In addition ‘optical device’ with 14 x magnification provided in front to project die of
View Complete Details

Double Disk Metallurgical Polisher

  • Standard Disk Dia 8”
  • Optional Disk Sizes 10” or 12”
  • Specification Engineered to perfection, the Table Top version Double disk Polisher/Grinder with variable speed is used extensively in metallurgical specimen preparation to provide a mirror like finish to the specimen, Equipped with high quality durable motors and powder
View Complete Details

Disc Polishing Machine

  • Specifications Table Top design fixed Speed, 8” Disc Diameter Standard, 1440 RPM, Quiet Belt driven Corrosion Resistant Fibre Reinforced Plastic Cover Body with 0.5 HP AC motor operation
  • Single Disc (Variable Speed Portable Type) It is compact complete unit with independent driving motor, speed change arrangement, swan neck tap, drain pot, guard, and cover and ON/ OFF switch.
View Complete Details

Dumpy Levels

  • Length 225mm/175mm.
  • Material Complete with wooden or aluminium folding tripod, Axis made up of aluminium & brass.
  • specification Quick setting dumpy level with erect image, 20x magnification, in plastic carrying case.
View Complete Details

Drum Compass

  • Features Glossy finish, Long lasting luster, Corrosion resistance, High strength
View Complete Details

Locket Compass

  • Features Stunning look , Gleaming surface, Lively appearance, Eye-catching design
View Complete Details

Henry Huges Compass

  • Features Smooth finish, Attractive design, Anti-corrosive finish, Long lasting sheen
View Complete Details

Copper Dial Compass

  • Features Perfect finish, Attractive look, Intricate design, Beautiful pattern
View Complete Details

Flat Compass

  • Features Smooth finish, Excellent design, Durability , Attractive look
View Complete Details

Liburnia Warship Compass

  • Features Long lasting shine, Perfect finish, Light weight , Durability
View Complete Details

Four Way Compass

  • Features Elegant design, Eye-catching look, Glossy finish, Light weight
View Complete Details

Antique Compass

  • Features Perfect finish, Fascinating design, Corrosion resistance, Splendid look
View Complete Details

Ranging Rod

  • Features Smooth finish, Sleek design
View Complete Details

Hand Held GPS

  • Physical dimensions 2.1" x 4.0" x 1.3" (5.4 x 10.3 x 3.3 cm)
  • Display size WxH 1.4" x 1.7" (3.6 x 4.3 cm); 2.2" diag (5.6 cm)
  • Display resolution WxH 128 x 160 pixels
View Complete Details

Pentax Auto Level

  • Features Long lasting shine , Fine finish, Optimum strength, Durability
View Complete Details

Sokkia Auto Level

  • Features Smooth finish, Attractive design, Light weight, Long lasting sheen
View Complete Details

Mirror Stereoscope

  • Mirror Stereoscope Mirror stereoscope with detachable binocular having magnification 4x, With reflecting mirrors comes in wooden casing, Useful for map measure & map.
View Complete Details

Vibrating Machine

  • Lubricant 100cc
  • vibration frequency 12000± 400 R.P.M. per minute.
  • features Rugged construction, negligible maintenance, high operational fluency, excellent performance and lon
  • Accessories Flat Belts , Set of Springs, KEW Cube Mould 70.6MM (I.S.I. Marked)
View Complete Details

Compaction Mould

  • Specifications 100 mm internal diameter, 127.3 mm height , 1000 ml volume
  • features compact design, robust construction, high strength, corrosion resistance and durability.
View Complete Details

Digital Theodolite

  • Features Quality approved, Accurate result, Easy operations & handling, Flawless performance, High durability
View Complete Details

Brunton Compass

  • Features Antique Finish, Brass Polish, Powder Coated
View Complete Details

Laser Theodolite

  • Features Splendid look, Beautiful appearance, Perfect finish, Attractive design
View Complete Details

Box Sextant

  • Features Long lasting shine, Fine finish, Light weight, Durabilit
View Complete Details

Roadometer

  • Features Robust construction, Extendable handle, Water & dust resistant button
View Complete Details

Bubble Cap Distillation Column

  • Learning Experiments To operate the column under total reflux condition and estimate the minimum number of theoretical plates required.To estimate the batch distillation curves for a binary system and verify the binary batch distillation equation for a known number of theoret
  • Control Panel Standard make On/Off switch, Mains Indicator etc.0-199.9°C, with the multi-channel switch.0-199.9°C, For Reboiler.
  • Required for Operation Drain.Refractometer for analysis.Required Chemicals.
View Complete Details

Natural Draft Tray Dryer

  • Support table Size 500 W x 500 D x 750 H in mm.
  • Electric supply Provide 230 +/- 10 VAC, 50 Hz
View Complete Details

Forced Draft Tray Dryer

  • Drying Chamber Insulated double wall chamber, Size (20 x 20 x 25) cm.
  • Weighing Balance Digital (0-1000gm) of ± 1 gm resolution.
  • Heater Nichrome wire heater.
  • Electricity Supply 1 Phase, 220 VAC, 2.5 kW.
  • Floor area 0.75 m x 2 m.
  • Temperature Sensors RTD PT 100 Type.
  • Digital Temp. Indicator 0-199.9° C (with multi-channel switch).
View Complete Details

Solid-Liquid Extraction Packed Bed Type

  • Extraction Column Material Borosilicate Glass.
  • Solvent Flow Measurement Rota meter.
  • Heater Nichrome wire heater
  • Temperature Sensor RTD PT-100 Type.
  • Solvent Tank Made of Stainless Steel, Capacity 30 Ltrs. Double wall.
  • Solvent circulation Magnetic Pump made of Polypropylene to Circulate solvent.
  • Electricity Supply 1 Phase, 220 V AC, 1.5 kW.
  • Digital Temp. Controller 0-199.9 deg C (For Hot Water Bath).
View Complete Details

Spray Tower

  • Extraction Column Material Borosilicate Glass
  • Extraction Column Height 750 mm (approx).
  • Extraction Column Diameter 45 mm (approx).
  • Feed TankM aterial Stainless Steel
  • Feed TankCapacity 20 Ltrs.
  • Feed TankQuantity 2 Nos.
  • Extract & Raffinate TanksMaterial Stainless Steel
  • Extract & Raffinate TanksQ uantity 2 Nos.
  • Extract & Raffinate TanksCapacity 10 Ltrs.
  • Feed Circulation By Compressed Air
  • Pressure Gauge Bourdon type, 0-2 kg/cm2.
  • Pressure Regulator 0-2 kg/cm².
  • Flow Measurement Rota meters (One each for Solvent & Solute)
View Complete Details

Sieve Plate Distillation Column

  • Rotameter For cooling water flow rate measurement.
  • Steam Generator Made of Stainless Steel, provided with Pressure Gauge & Level Indicator, Safety valve & insulated with ceramic wool and cladding with Aluminium foil.
  • Reflux Divider Special arrangement to change R/D ratio automatically.
  • Distillation Column Material Stainless Steel, Dia 110mm, seven sieve trays
  • Pressure Gauge Bourdon type, 0-2 kg/cm2
  • Temperature Sensors RTD PT-100 type.
  • Condenser Shell & Tube type made of Stainless Steel.
  • Heaters Nichrome wire heater.
  • Bottom Product Tank Made of Stainless Steel, capacity 5Ltrs.
  • Distillate Tank Made of Stainless Steel, capacity 5Ltrs.
View Complete Details

Packed Distillation Column

  • Feature  Stainless Steel tanks and wetted parts, Simple to operate & maintain, Superb Painted structure, Compact & stand alone set up.
  • Experiment  To study the Packed Distillation Column.
  • Electricity Supply 1Phase, 220 V AC, 6.5 kW.
View Complete Details

Motorised Gyroscope

  • Application calculating the weight and distance of weight from the centre of the rotor.
  • Electricity Supply 230 V AC, Single Phase, 0.5 kW.
  • Specification coupled to a motor mounted on a trunion frame having bearings in a yoke frame, which is free to rota
View Complete Details

Journal Bearing Apparatus

  • Electric supply 230 V AC, Single Phase.
  • Bench area 1.5 x 1.5 x 4 m.
  • Experiments To study the pressure profile of lubricating oil at various conditions of load and speed, To measure the frictional torque and power transmit, Plotting the Cartesian polar pressure curves.
View Complete Details

Prism Pole

  • Height 2.6 meters.
  • Features strength, durability, compact design and robustnes.
View Complete Details

Mini Prism

  • use angular measurement.
  • Features Also available as per customers requiremen, Meet the international quality standards., Easy to use
View Complete Details

Electrical Incinerator

  • Material Stainless steel
  • Features Robust construction, Virtually smoke and smell free with secondary burners., High temperature refractory lining., Quick heat up time and lesser operational time, Easy installation, Trouble free operation and maintenance, Designed to meet standards of Central Po
  • Capacity 15 to 20 kg
View Complete Details

Sanitary Napkin Incinerator

  • Material Stainless steel
  • Features Instant disposal of used Napkins in a very scientific and hygienic way, Front Opening Door with Automatic Door Closer, Inside SS covering for maximum lifetime, Outside Mild Steel Metallic Spray Painting, The ash is collected in an Ash Collection tray, Just St
  • Accessory Ceramic insulation for external thermal protection, Auto thermal cut off for safety of user, Having an emission outlet outside the room for the fumes developed during the incineration., Temperature and Timer display, Tripper for Emergency Power shutdown
  • Loading Capacity  Approximately 200 napkins per day
  • Duration to destroy Up-to 15 minutes for 10 Napkins
View Complete Details

Nano Sanitary Napkin Incinerator

  • Features Instant disposal of used Napkins in a very scientific and hygienic way, Top Sliding Door for easy operation, Low Weight for Easy and convenient to install inside the toilet and Wall Mountable, Inside SS covering for maximum lifetime, Outside Mild Steel Metal
  • Applications Common in Ladies Hostels, Common Unit for Apartments, Toilets of Railway Stations, Toilets of Air Ports, Toilets of Bus Stops
  • Loading Capacity Approximately 100 napkins per day
  • Size in inches (HxWxD) 13x13x9
  • Duration to destroy Approximately up-to 10 minutes for 5 Napkins
  • Insulation Ceramic insulation
View Complete Details

Bio Waste Oil Fired Medical Incinerator

  • Feature Robust construction, Virtually smoke and smell free with secondary burners, High temperature refractory lining, Quick heat up time and lesser operational time, Easy installation
  • Users Hospitals, Nursing homes Institutions, Industrial wastes Camp wastes Municipal wastes Malls/Shopping centers, Animal farms like sheep kennels
  • Capacity Kgs/hr 5 to 75
  • Material Stainless steel
View Complete Details

Electronic Bio Waste Medical Incinerator

  • Feature Robust construction, Virtually smoke and smell free with secondary burners, High temperature refractory lining, Quick heat up time and lesser operational time, Easy installation, Trouble free operation and maintenance
  • Applications Medical colleges Catering wastes Resorts/Hotels Poultry, Hospitals, Nursing homes Institutions, Industrial wastes Camp wastes Municipal wastes Malls/Shopping centers, Animal farms like sheep kennels
  • Incineration 1000 C
  • Maximum CO level 55 mg/m3
  • Combustion efficiency 99.90%
  • Material Stainless steel
View Complete Details

General Waste Incinerator

  • Type of Waste Paper, Garbage, Refuge, Rubber, Leather, Tyre, Rice Grass, Hotel/Resort Waste, Non-eatable Food, any other waste heaving some
  • Thickness 4 mm
  • Fuel Electrical heater of 20 KW with automatic controls
  • Capacity 15 to 20 kg/batch
  • Motor 2 HP
  • MS Chimney thickness 6 mm
  • MS sheet Dia at top 150 mm
  • MS sheet Dia at bottom 600-mm
  • Base plate thickness 16 mm
  • Straight Chimney Dia 150 mm x 600 mm
  • Straight Chimney Height 30 mtr
  • Collection Tank capacity 1000 Lts
  • HDPE tank  100 Lts. capacity with stop cock for chemical storage
  • Induced Draft Fan Centrifugal 2000 Nm3/Hr capacity
  • Head  300 mm
  • Emergency water storage tank  500 Ltr
View Complete Details

Large Animal Incinerator

  • Optional Accessories Emission chimney per running ft, Dilution Process System, Foul Odor Treatment System, Gravity settler
  • Temperature 700 to 900° C
  • Capacity 100 to 1000 kg
View Complete Details

Industrial Waste Incinerator

  • Type Dual chamber Primary chamber
  • Material Mild steel
  • Features Supported with supporting structure made from IS structural section Material, It shall be sturdy to with stand any stress or stain formed during the operation
  • Dia 800 mm
  • Height 1500 mm
  • Material of construction Other body made from quality plate
  • Thickness 6 mm
  • Total thickness of insulation 230 mm
  • Operating temp. (Primary chamber) 800 ± 50 deg.C
  • Operating temp. (Secondary chamber) 1050 ± 50 deg.C
  • Dia 900 mm
  • Retention tune 2 secondsh
View Complete Details

Plastic Waste Shredder

  • Application Finishing & Producing Industry, Hospitals/Nursing homes, Bio Medical Waste, Laboratories, Catering Industry
  • Features Solid body structure and casing, Low noise level, Heavy duty gear, Maintenance gear, Unit is protected against overloads and equipped with fuses
  • Motor Capacity 3 KW, 5 KW, 7.5 KW
View Complete Details

Poultry Incinerator

  • Process Fully Automatic and Electrically operated
  • Loading Capacity Approximately 25-200 kg per day
  • Duration to destroy Up-to 60 minutes for 10 kg
  • Features Robust construction, Virtually smoke and smell free with secondary burners, High temperature refractory lining., Quick heat up time and lesser operational time., Easy installation.
View Complete Details

Small Poultry Waste Incinerator

  • Fuel Electric, Diesel or Gas
  • Capacity (Cubic Mtr) 2.5
  • Ave Capacity 25 to 200 kg
  • Burn Rate (Average kgs/hr) 25 kg
  • Ash Residue 3%
  • Approx Incineration Time (Per load) 3 hrs
  • Max. Operating Temperature 1200
  • Residency Time in 2nd Chamber 2 seconds
  • Temperature Monitoring Yes
  • Thermostat Control Yes
  • Constant Running Fan Yes
  • Secondary Combustion Chamber Yes
  • Feature Concave refractory bottom specifically designed to insure burnout and total destruction of solid and liquid wastes, Insulated, refractory-lined chambers and stacks for durability, energy retention, and emissions control
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us